A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. A mismatch between the X server and the libXfont2 library's maximum font name length can cause a stack buffer overflow during font alias resolution. The server allocates a 256 byte stack buffer but libXfont2's alias target name length is 1024 bytes. A font alias name between 257 and 1023 bytes causes the X server to copy that name into the undersized stack buffer without further checks. This may be used to crash the server, or for privilege escalation if the X server runs as root.

A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. The X server has multiple stack buffers sized XkbMaxShiftLevel * XkbNumKbdGroups but CheckKeyTypes() does not verify or clamp non-canonical key types to XkbMaxShiftLevel. A client can change key types to excessive shift levels and trigger stack overflows. This is caused by an incomplete fix of CVE-2025-26597. This may be used to crash the server, or for privilege escalation if the X server runs as root.

A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. _XkbSetMapChecks() declares a fixed-size stack buffer mapWidths[256] indexed by key type index. The helper function CheckKeyTypes() writes to this buffer at a client-controlled offset, allowing a stack buffer overflow. This may be used to crash the server, or for privilege escalation if the X server runs as root.

In GnuPG before 2.5.17, a stack-based buffer overflow exists in tpm2daemon during handling of the PKDECRYPT command for TPM-backed RSA and ECC keys.

A buffer overflow flaw was found in X.Org and Xwayland. The code in XkbVModMaskText() allocates a fixed-sized buffer on the stack and copies the names of the virtual modifiers to that buffer. The code fails to check the bounds of the buffer and would copy the data regardless of the size.

A flaw was found in the kernel. An unprivileged local user can exploit this vulnerability to execute arbitrary code within the kernel, which leads to a local privilege escalation (LPE). This allows the attacker to gain root privileges and take full control of the affected system.

A use-after-free flaw was found in the X.Org X server and Xwayland in miSyncDestroyFence(). A client that sets up multiple fence triggers can trigger a use-after-free function pointer call. An attacker would connect to the X server to set up a fence and await that fence, then a second X connection destroys the fence, causing the use-after-free. This may be used to crash the server, or for privilege escalation if the X server runs as root.

A use-after-free flaw was found in the X.Org X server and Xwayland in FreeCounter(). A client that sets up multiple SyncCounters and awaits on those triggers can trigger a use-after-free when destroying those counters via a second client connection. This may be used to crash the server, or for privilege escalation if the X server runs as root.

An out-of-bounds write flaw was found in the X.Org X server and Xwayland in DRIGetBuffers/DRIGetBuffersWithFormat. A client that requests multiple DRI2BufferBackLeft attachments and one DRI2BufferFrontLeft can trigger an out-of-bounds heap write. This may be used to crash the server, or for privilege escalation if the X server runs as root.

A use-after-free vulnerability was found in the ProcRenderAddGlyphs() function of Xorg servers. This issue occurs when AllocateGlyph() is called to store new glyphs sent by the client to the X server, potentially resulting in multiple entries pointing to the same non-refcounted glyphs. Consequently, ProcRenderAddGlyphs() may free a glyph, leading to a use-after-free scenario when the same glyph pointer is subsequently accessed. This flaw allows an authenticated attacker to execute arbitrary code on the system by sending a specially crafted request.

A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via operating system command injection.

It was discovered that a world-readable log file belonging to Candlepin component of Red Hat Satellite 6.4 leaked the credentials of the Candlepin database. A malicious user with local access to a Satellite host can use those credentials to modify the database and prevent Satellite from fetching package updates, thus preventing all Satellite hosts from accessing those updates.

An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system.

An out-of-bounds stack write flaw was found in unixODBC on 64-bit architectures where the caller has 4 bytes and callee writes 8 bytes. This issue may go unnoticed on little-endian architectures, while big-endian architectures can be broken.

A memory leak flaw was found in the Linux kernel’s io_uring functionality in how a user registers a buffer ring with IORING_REGISTER_PBUF_RING, mmap() it, and then frees it. This flaw allows a local user to crash or potentially escalate their privileges on the system.

A use-after-free flaw was found in the Linux Kernel. When a disk is removed, bdi_unregister is called to stop further write-back and waits for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation work after this has completed, which can result in the timer attempting to access the recently freed bdi_writeback.

Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config command. An attacker can provide a "--log-file" argument to this directive, causing pkg-config to write to an attacker-controlled location.

A flaw was found in the X.Org server. The cursor code in both Xephyr and Xwayland uses the wrong type of private at creation. It uses the cursor bits type with the cursor as private, and when initiating the cursor, that overwrites the XSELINUX context.

A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system.

A heap-based buffer overflow was found in the __vsyslog_internal function of the glibc library. This function is called by the syslog and vsyslog functions. This issue occurs when the openlog function was not called, or called with the ident argument set to NULL, and the program name (the basename of argv[0]) is bigger than 1024 bytes, resulting in an application crash or local privilege escalation. This issue affects glibc 2.36 and newer.

A null pointer dereference flaw was found in the nft_inner.c functionality of netfilter in the Linux kernel. This issue could allow a local user to crash the system or escalate their privileges on the system.

A time-of-check time-of-use (TOCTOU) race condition was found in the abrt-dbus D-Bus service's SetElement method. Between dump directory creation and post-create event execution, any local user can call SetElement to write arbitrary text files into the root-owned dump directory, bypassing package validation and allowing crashes of unpackaged binaries to survive post-create processing.

A out-of-bounds write flaw was found in the xorg-x11-server. This issue occurs due to an incorrect calculation of a buffer offset when copying data stored in the heap in the XIChangeDeviceProperty function in Xi/xiproperty.c and in RRChangeOutputProperty function in randr/rrproperty.c, allowing for possible escalation of privileges or denial of service.

A symlink following vulnerability was found in the ABRT post-create event handler scripts in libreport. Event scripts write output files using shell redirections without the O_NOFOLLOW flag. If the target file is replaced with a symlink, the shell process running as root follows the symlink and writes content to the symlink target, allowing arbitrary file overwrites on the system.

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put().

In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: handle empty bo and UAF races There look to be some nasty races here when triggering the invalidate_mappings hook: 1) We do xe_bo_alloc() followed by the attach, before the actual full bo init step in xe_dma_buf_init_obj(). However the bo is visible on the attachments list after the attach. This is bad since exporter driver, say amdgpu, can at any time call back into our invalidate_mappings hook, with an empty/bogus bo, leading to potential bugs/crashes. 2) Similar to 1) but here we get a UAF, when the invalidate_mappings hook is triggered. For example, we get as far as xe_bo_init_locked() but this fails in some way. But here the bo will be freed on error, but we still have it attached from dma-buf pov, so if the invalidate_mappings is now triggered then the bo we access is gone and we trigger UAF and more bugs/crashes. To fix this, move the attach step until after we actually have a fully set up buffer object. Note that the bo is not published to userspace until later, so not sure what the comment "Don't publish the bo until we have a valid attachment", is referring to. We have at least two different customers reporting hitting a NULL ptr deref in evict_flags when importing something from amdgpu, followed by triggering the evict flow. Hit rate is also pretty low, which would hint at some kind of race, so something like 1) or 2) might explain this. v2: - Shuffle the order of the ops slightly (no functional change) - Improve the comment to better explain the ordering (Matt B) (cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971)

In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted.

In the Linux kernel, the following vulnerability has been resolved: sched/psi: fix race between file release and pressure write A potential race condition exists between pressure write and cgroup file release regarding the priv member of struct kernfs_open_file, which triggers the uaf reported in [1]. Consider the following scenario involving execution on two separate CPUs: CPU0 CPU1 ==== ==== vfs_rmdir() kernfs_iop_rmdir() cgroup_rmdir() cgroup_kn_lock_live() cgroup_destroy_locked() cgroup_addrm_files() cgroup_rm_file() kernfs_remove_by_name() kernfs_remove_by_name_ns() vfs_write() __kernfs_remove() new_sync_write() kernfs_drain() kernfs_fop_write_iter() kernfs_drain_open_files() cgroup_file_write() kernfs_release_file() pressure_write() cgroup_file_release() ctx = of->priv; kfree(ctx); of->priv = NULL; cgroup_kn_unlock() cgroup_kn_lock_live() cgroup_get(cgrp) cgroup_kn_unlock() if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards the memory deallocation of of->priv performed within cgroup_file_release(). However, the operations involving of->priv executed within pressure_write() are not entirely covered by the protection of cgroup_mutex. Consequently, if the code in pressure_write(), specifically the section handling the ctx variable executes after cgroup_file_release() has completed, a uaf vulnerability involving of->priv is triggered. Therefore, the issue can be resolved by extending the scope of the cgroup_mutex lock within pressure_write() to encompass all code paths involving of->priv, thereby properly synchronizing the race condition occurring between cgroup_file_release() and pressure_write(). And, if an live kn lock can be successfully acquired while executing the pressure write operation, it indicates that the cgroup deletion process has not yet reached its final stage; consequently, the priv pointer within open_file cannot be NULL. Therefore, the operation to retrieve the ctx value must be moved to a point *after* the live kn lock has been successfully acquired. In another situation, specifically after entering cgroup_kn_lock_live() but before acquiring cgroup_mutex, there exists a different class of race condition: CPU0: write memory.pressure CPU1: write cgroup.pressure=0 =========================== ============================= kernfs_fop_write_iter() kernfs_get_active_of(of) pressure_write() cgroup_kn_lock_live(memory.pressure) cgroup_tryget(cgrp) kernfs_break_active_protection(kn) ... blocks on cgroup_mutex cgroup_pressure_write() cgroup_kn_lock_live(cgroup.pressure) cgroup_file_show(memory.pressure, false) kernfs_show(false) kernfs_drain_open_files() cgroup_file_release(of) kfree(ctx) of->priv = NULL cgroup_kn_unlock() ... acquires cgroup_mutex ctx = of->priv; // may now be NULL if (ctx->psi.trigger) // NULL dereference Consequently, there is a possibility that of->priv is NULL, the pressure write needs to check for this. Now that the scope of the cgroup_mutex has been expanded, the original explicit cgroup_get/put operations are no longer necessary, this is because acquiring/releasing the live kn lock inherently executes a cgroup get/put operation. [1] BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 Call Trace: pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Clamp XDomain response data copy to allocation size tb_xdp_properties_request() derives the per-packet copy length from the response header without checking that it fits in the previously allocated data buffer. A malicious peer can set its length field larger than the declared data_length, causing memcpy to write past the kcalloc allocation. Clamp the per-packet copy length so that the cumulative offset never exceeds data_len.

In the Linux kernel, the following vulnerability has been resolved: mm/list_lru: drain before clearing xarray entry on reparent memcg_reparent_list_lrus() clears the dying memcg's xarray entry with xas_store(&xas, NULL) before reparenting its per-node lists into the parent. This opens a window where a concurrent list_lru_del() arriving for the dying memcg sees xa_load() == NULL, walks to the parent in lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls list_del_init() on an item still physically linked on the dying memcg's list. If another in-flight thread holds the dying memcg's per-node lock at the same moment (another list_lru_del, or a list_lru_walk_one running an isolate callback), both threads modify ->next/->prev pointers on the same physical list under different locks. Adjacent items can corrupt each other's links. Fix it by reversing the order: reparent each per-node list and mark the child's list lru dead and then clear the xarray entry. Any concurrent list_lru op that finds the still-set xarray entry either takes the dying memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and walks to the parent, where the items now live.

In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_bvec_write_partial() zram_read_page() picks the sync or async backing device read path based on whether the parent bio is NULL. zram_bvec_write_partial() passes its parent bio down, so for ZRAM_WB slots the read is dispatched asynchronously and zram_read_page() returns 0 while the bio is still in flight. The caller then runs memcpy_from_bvec(), zram_write_page() and __free_page() on the buffer, leaving the async read to write into a freed page. zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d ("zram: fix synchronous reads") for the same reason; the write_partial counterpart was missed.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nat: use kfree_rcu to release ops Florian Westphal says: "Historically this is not an issue, even for normal base hooks: the data path doesn't use the original nf_hook_ops that are used to register the callbacks. However, in v5.14 I added the ability to dump the active netfilter hooks from userspace. This code will peek back into the nf_hook_ops that are available at the tail of the pointer-array blob used by the datapath. The nat hooks are special, because they are called indirectly from the central nat dispatcher hook. They are currently invisible to the nfnl hook dump subsystem though. But once that changes the nat ops structures have to be deferred too." Update nf_nat_register_fn() to deal with partial exposition of the hooks from error path which can be also an issue for nfnetlink_hook.

In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7)

A flaw was found in virtio-win, specifically within the VirtIO Block (BLK) device. When the device undergoes a reset, it fails to properly manage memory, resulting in a use-after-free vulnerability. This issue could allow a local attacker to corrupt system memory, potentially leading to system instability or unexpected behavior.

In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with list_for_each_entry_safe(), which caches the next entry in @tmp before the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may drop the socket lock inside sctp_wait_for_sndbuf(). While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the association cached in @tmp, migrating it to a new endpoint via sctp_sock_migrate() (list_del_init() + list_add_tail() to newep->asocs), and optionally close the new socket which frees the association via kfree_rcu(). The cached @tmp can also be freed by a network ABORT for that association, processed in softirq while the lock is dropped. sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing revalidates @tmp. After a successful return, the iterator advances to the stale @tmp, yielding either a use-after-free (if the peeled socket was closed) or a list-walk onto the new endpoint's list head (type confusion of &newep->asocs as a struct sctp_association *). Both are reachable from CapEff=0; the type-confusion path gives controlled indirect call via the outqueue.sched->init_sid pointer. Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc() returns. @asoc is known to still be on ep->asocs at that point: the only callers that list_del an association from ep->asocs are sctp_association_free() (which sets asoc->base.dead) and sctp_assoc_migrate() (which changes asoc->base.sk), and sctp_wait_for_sndbuf() checks both under the lock before any successful return; a tripped check propagates as err < 0 and the loop bails before the re-derive. The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so the @tmp cached by list_for_each_entry_safe() still covers the lock-held free that ba59fb027307 ("sctp: walk the list of asoc safely") was added for.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event() Sashiko points out the radix_tree itself is RCU safe, but nothing ever frees the mlx4_srq struct with RCU, and it isn't even accessed within the RCU critical section. It also will crash if an event is delivered before the srq object is finished initializing. Use the spinlock since it isn't easy to make RCU work, use refcount_inc_not_zero() to protect against partially initialized objects, and order the refcount_set() to be after the srq is fully initialized.

A flaw was found in GIMP. An integer overflow vulnerability exists in the GIMP "Despeckle" plug-in. The issue occurs due to unchecked multiplication of image dimensions, such as width, height, and bytes-per-pixel (img_bpp), which can result in allocating insufficient memory and subsequently performing out-of-bounds writes. This issue could lead to heap corruption, a potential denial of service (DoS), or arbitrary code execution in certain scenarios.

A Local Privilege Escalation (LPE) vulnerability has been discovered in pam-config within Linux Pluggable Authentication Modules (PAM). This flaw allows an unprivileged local attacker (for example, a user logged in via SSH) to obtain the elevated privileges normally reserved for a physically present, "allow_active" user. The highest risk is that the attacker can then perform all allow_active yes Polkit actions, which are typically restricted to console users, potentially gaining unauthorized control over system configurations, services, or other sensitive operations.

In the Linux kernel, the following vulnerability has been resolved: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle