The Admin web application in Kinetica 7.0.9.2.20191118151947 does not properly sanitise the input for the function getLogs. This lack of sanitisation could be exploited to allow an authenticated attacker to run remote code on the underlying operating system. The logFile parameter in the getLogs function was used as a variable in a command to read log files; however, due to poor input sanitisation, it was possible to bypass a replacement and break out of the command.

Cursor is a code editor built for programming with AI. In versions 1.2.4 and below, attackers can achieve remote and persistent code execution by modifying an already trusted MCP configuration file inside a shared GitHub repository or editing the file locally on the target's machine. Once a collaborator accepts a harmless MCP, the attacker can silently swap it for a malicious command (e.g., calc.exe) without triggering any warning or re-prompt. If an attacker has write permissions on a user's active branches of a source repository that contains existing MCP servers the user has previously approved, or allows an attacker has arbitrary file-write locally, the attacker can achieve arbitrary code execution. This is fixed in version 1.3.

An OS Command Injection vulnerability in the endpoint_devicemap.php component of Fonality Trixbox Community Edition allows an attacker to execute commands on the underlying operating system as the "asterisk" user. Note that Trixbox Community Edition has been unsupported by the vendor since 2012. This issue affects: Fonality Trixbox Community Edition, versions 1.2.0 through 2.8.0.4. Versions 1.0 and 1.1 are unaffected.

An unprivileged Windows user on the VDA or an SMB user can perform arbitrary command execution as SYSTEM in CVAD versions before 2009, 1912 LTSR CU1 hotfixes CTX285871 and CTX285872, 7.15 LTSR CU6 hotfix CTX285341 and CTX285342

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

A command injection vulnerability exists in EdgeSwitch firmware <v1.9.0 that allowed an authenticated read-only user to execute arbitrary shell commands over the HTTP interface, allowing them to escalate privileges.

codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an incomplete fix of CVE-2020-7596.

A weakness has been identified in Trendnet TEW-657BRM 1.00.1. This affects the function add_wps_client of the file /setup.cgi. This manipulation of the argument wl_enrolee_pin causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

Meinberg Lantime M300 and M1000 devices allow attackers (with privileges to configure a device) to execute arbitrary OS commands by editing the /config/netconf.cmd script (aka Extended Network Configuration). Note: According to the description, the vulnerability requires a fully authenticated super-user account using a webUI function that allows super users to edit a script supposed to execute OS commands. The given weakness enumeration (CWE-78) is not applicable in this case as it refers to abusing functions/input fields not supposed to be accepting OS commands by using 'Special Elements.

Cacti 1.2.8 allows Remote Code Execution (by privileged users) via shell metacharacters in the Performance Boost Debug Log field of poller_automation.php. OS commands are executed when a new poller cycle begins. The attacker must be authenticated, and must have access to modify the Performance Settings of the product.

This affects the package systeminformation before 4.27.11. This package is vulnerable to Command Injection. The attacker can concatenate curl's parameters to overwrite Javascript files and then execute any OS commands.

A vulnerability was detected in Trendnet TEW-657BRM 1.00.1. Affected is the function ping_test of the file /setup.cgi. Performing a manipulation of the argument c4_IPAddr results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.

Unsanitized input in an OS command in the virtual desktop session name handling in AWS Research and Engineering Studio (RES) version 2025.03 through 2025.12.01 might allow a remote authenticated actor to execute arbitrary commands as root on the virtual desktop host via a crafted session name. To remediate this issue, users are advised to upgrade to RES version 2026.03 or apply the corresponding mitigation patch to their existing environment.

A vulnerability has been found in Tenda AC10 16.03.10.10_multi_TDE01. Affected is the function formAddMacfilterRule of the file /bin/httpd. Such manipulation leads to os command injection. It is possible to launch the attack remotely. Multiple endpoints might be affected.

GitHub Actions Runner is the application that runs a job from a GitHub Actions workflow. The actions runner invokes the docker cli directly in order to run job containers, service containers, or container actions. A bug in the logic for how the environment is encoded into these docker commands was discovered in versions prior to 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4 that allows an input to escape the environment variable and modify that docker command invocation directly. Jobs that use container actions, job containers, or service containers alongside untrusted user inputs in environment variables may be vulnerable. The Actions Runner has been patched, both on `github.com` and hotfixes for GHES and GHAE customers in versions 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4. GHES and GHAE customers may want to patch their instance in order to have their runners automatically upgrade to these new runner versions. As a workaround, users may consider removing any container actions, job containers, or service containers from their jobs until they are able to upgrade their runner versions.

Linksys AX3200 1.1.00 is vulnerable to OS command injection by authenticated users via shell metacharacters to the diagnostics traceroute page.

Dokploy is a self-hostable Platform as a Service (PaaS) that simplifies the deployment and management of applications and databases. An authenticated, low-privileged user can run arbitrary OS commands on the Dokploy host. The tRPC procedure docker.getContainersByAppNameMatch interpolates the attacker-supplied appName value into a Docker CLI call without sanitisation, enabling command injection under the Dokploy service account. This vulnerability is fixed in 0.23.7.

Intelbras WiFiber 120AC inMesh before 1-1-220826 allows command injection by authenticated users, as demonstrated by the /boaform/formPing6 and /boaform/formTracert URIs for ping and traceroute.

An OS command injection vulnerability exists in the console infactory_port functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

Dell vApp Manager, versions prior to 9.2.4.9 contain a Command Injection Vulnerability. An authorized attacker could potentially exploit this vulnerability leading to an execution of an inserted command. Dell recommends customers to upgrade at the earliest opportunity.

ThreatSonar Anti-Ransomware developed by TeamT5 has an Privilege Escalation vulnerability. Authenticated remote attackers with shell access can inject OS commands and execute them with root privileges.

contentHostProperties.php in Rasilient PixelStor 5000 K:4.0.1580-20150629 (KDI Version) allows authenticated attackers to remotely execute code via the name parameter.

A flaw has been found in TOTOLINK X6000R 9.4.0cu.1360_B20241207/9.4.0cu.1498_B20250826. Affected by this issue is the function setLanCfg of the file /usr/sbin/shttpd. Executing a manipulation of the argument Hostname can lead to os command injection. The attack may be launched remotely.

A privilege escalation vulnerability exists in SolarWinds Serv-U before 15.1.7 for Linux.

Improper Input Validation in Eaton's Intelligent Power Manager (IPM) v 1.67 & prior on file name during configuration file import functionality allows attackers to perform command injection or code execution via specially crafted file names while uploading the configuration file in the application.

In NOKIA 1350 OMS R14.2, multiple OS Command Injection vulnerabilities occurs. This allows authenticated users to execute commands on the operating system.

An OS command injection vulnerability exists in the console infactory_wlan functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the daretools binary functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability was identified in Totolink A3300R 17.0.0cu.557_b20221024. This affects the function setLanCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument lanIp leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A vulnerability has been identified in SINEC NMS (All versions < V2.0 SP1). The affected application incorrectly neutralizes special elements when creating a report which could lead to command injection.

An OS command injection vulnerability exists in the console infactory_net functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

Dell EMC Data Protection Advisor 6.4, 6.5 and 18.1 contain an OS command injection vulnerability. A remote authenticated malicious user may exploit this vulnerability to execute arbitrary commands on the affected system.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can execute commands as the root user by sending a crafted HTTP GET to the UCM's "Old" HTTPS API.

Softaculous Webuzo contains a command injection vulnerability in the FTP management functionality. A remote, authenticated attacker can exploit this vulnerability to gain code execution on the system.

A flaw has been found in D-Link DIR-513 1.10. The impacted element is an unknown function of the file /goform/formSysCmd. Executing a manipulation of the argument sysCmd can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Tenda F453 1.0.0.3. The affected element is the function FormWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A flaw has been found in Linksys MR9600 2.0.6.206937. Affected is the function smartConnectConfigure of the file SmartConnect.lua. Executing a manipulation of the argument configApSsid/configApPassphrase/srpLogin/srpPassword can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Logstorage version 8.0.0 and earlier, and ELC Analytics version 3.0.0 and earlier allow remote attackers to execute arbitrary OS commands via a specially crafted log file.

An os command injection vulnerability exists in the DdnsSetting.cgi functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted DDNS configuration can lead to arbitrary command execution. An attacker can modify a configuration value to trigger this vulnerability.

A security flaw has been discovered in Tenda HG3 2.0 300003070. This vulnerability affects the function formgponConf of the file /boaform/admin/formgponConf. The manipulation of the argument fmgpon_loid results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

An OS command injection vulnerability has been identified in LoadMaster.  An authenticated UI user with any permission settings may be able to inject commands into a UI component using a shell command resulting in OS command injection.

A flaw has been found in TRENDnet TEW-821DAP up to 1.12B01. The impacted element is the function tools_diagnostic of the file /tmp/diagnostic of the component Firmware Udpate. This manipulation causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer.

Cacti versions prior to 0.8.6-d contain a remote command execution vulnerability in the graph_view.php script. An authenticated user can inject arbitrary shell commands via the graph_start GET parameter, which is improperly handled during graph rendering. This flaw allows attackers to execute commands on the underlying operating system with the privileges of the web server process, potentially compromising system integrity.

GitPython is a python library used to interact with Git repositories. From version 3.1.30 to before version 3.1.47, GitPython blocks dangerous Git options such as --upload-pack and --receive-pack by default, but the equivalent Python kwargs upload_pack and receive_pack bypass that check. If an application passes attacker-controlled kwargs into Repo.clone_from(), Remote.fetch(), Remote.pull(), or Remote.push(), this leads to arbitrary command execution even when allow_unsafe_options is left at its default value of False. This issue has been patched in version 3.1.47.

An issue was discovered in Poly Studio before 3.7.0. Command Injection can occur via the CN field of a Create Certificate Signing Request (CSR) action.

Softaculous Webuzo contains a command injection in the password reset functionality. A remote, authenticated attacker can exploit this vulnerability to gain code execution on the system.