In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid the out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to shrink read extent node in batches We use rwlock to protect core structure data of extent tree during its shrink, however, if there is a huge number of extent nodes in extent tree, during shrink of extent tree, it may hold rwlock for a very long time, which may trigger kernel hang issue. This patch fixes to shrink read extent node in batches, so that, critical region of the rwlock can be shrunk to avoid its extreme long time hold.

In the Linux kernel, the following vulnerability has been resolved: mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate() Although it is guided that `#mbox-cells` must be at least 1, there are many instances of `#mbox-cells = <0>;` in the device tree. If that is the case and the corresponding mailbox controller does not provide `fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will be used by default and out-of-bounds accesses could occur due to lack of bounds check in that function.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the zero-initialized 'data_char' and writing to 'data', resulting in all-zero output regardless of the actual I2C read. Fix this by: 1. Expanding 'data_char' to 66 bytes to safely hold the hex output. 2. Correcting the bin2hex() argument order and using the actual read count. 3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix crash while reading debugfs attribute The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d

In the Linux kernel, the following vulnerability has been resolved: xfs: don't walk off the end of a directory data block This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry to make sure don't stray beyond valid memory region. Before patching, the loop simply checks that the start offset of the dup and dep is within the range. So in a crafted image, if last entry is xfs_dir2_data_unused, we can change dup->length to dup->length-1 and leave 1 byte of space. In the next traversal, this space will be considered as dup or dep. We may encounter an out of bound read when accessing the fixed members. In the patch, we make sure that the remaining bytes large enough to hold an unused entry before accessing xfs_dir2_data_unused and xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make sure that the remaining bytes large enough to hold a dirent with a single-byte name before accessing xfs_dir2_data_entry.

In the Linux kernel, the following vulnerability has been resolved: tun: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tun_xdp_one() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tun_xdp_one-->eth_type_trans() may access the Ethernet header although it can be less than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tun_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted for IFF_TAP. This is to drop any frame shorter than the Ethernet header size just like how tun_get_user() does. CVE: CVE-2024-41091

In the Linux kernel, the following vulnerability has been resolved: tap: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tap_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted. This is to drop any frame shorter than the Ethernet header size just like how tap_get_user() does. CVE: CVE-2024-41090

In the Linux kernel, the following vulnerability has been resolved: bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc1/0x5e0 mm/kasan/report.c:475 kasan_report+0xbe/0xf0 mm/kasan/report.c:588 strlen+0x7d/0xa0 lib/string.c:418 __fortify_strlen include/linux/fortify-string.h:210 [inline] in4_pton+0xa3/0x3f0 net/core/utils.c:130 bond_option_arp_ip_targets_set+0xc2/0x910 drivers/net/bonding/bond_options.c:1201 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156 dev_attr_store+0x54/0x80 drivers/base/core.c:2366 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x96a/0xd80 fs/read_write.c:584 ksys_write+0x122/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace ]--- Fix it by adding a check of string length before using it.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add error handle to avoid out-of-bounds if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should be stop to avoid out-of-bounds read, so directly return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: Fix out of bounds when parsing TCP options The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length.

In the Linux kernel, the following vulnerability has been resolved: soundwire: cadence: fix invalid PDI offset For some reason, we add an offset to the PDI, presumably to skip the PDI0 and PDI1 which are reserved for BPT. This code is however completely wrong and leads to an out-of-bounds access. We were just lucky so far since we used only a couple of PDIs and remained within the PDI array bounds. A Fixes: tag is not provided since there are no known platforms where the out-of-bounds would be accessed, and the initial code had problems as well. A follow-up patch completely removes this useless offset.

In the Linux kernel, the following vulnerability has been resolved: tools/nolibc/stdlib: fix memory error in realloc() Pass user_p_len to memcpy() instead of heap->len to prevent realloc() from copying an extra sizeof(heap) bytes from beyond the allocated region.

In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bound access of qmi_invoke_handler() Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence facing below KASAN warning, ================================================================== BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148 Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273 CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0 Workqueue: qmi_msg_handler qmi_data_ready_work Call trace: dump_backtrace+0x0/0x20c show_stack+0x14/0x1c dump_stack+0xe0/0x138 print_address_description.isra.5+0x30/0x330 __kasan_report+0x16c/0x1bc kasan_report+0xc/0x14 __asan_load8+0xa8/0xb0 qmi_invoke_handler+0xa4/0x148 qmi_handle_message+0x18c/0x1bc qmi_data_ready_work+0x4ec/0x528 process_one_work+0x2c0/0x440 worker_thread+0x324/0x4b8 kthread+0x210/0x228 ret_from_fork+0x10/0x18 The address belongs to the variable: ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k] [...] ================================================================== Add a dummy terminator entry at the end to assist the qmi_invoke_handler() in traversing up to the terminator entry without accessing an out-of-boundary index. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode() syzbot reports a kernel bug as below: F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4 ================================================================== BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline] BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076 CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] current_nat_addr fs/f2fs/node.h:213 [inline] f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline] f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925 ioctl_fiemap fs/ioctl.c:220 [inline] do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838 __do_sys_ioctl fs/ioctl.c:902 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is we missed to do sanity check on i_xattr_nid during f2fs_iget(), so that in fiemap() path, current_nat_addr() will access nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering kasan bug report, fix it.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate slices count returned by FW The function adf_send_admin_tl_start() enables the telemetry (TL) feature on a QAT device by sending the ICP_QAT_FW_TL_START message to the firmware. This triggers the FW to start writing TL data to a DMA buffer in memory and returns an array containing the number of accelerators of each type (slices) supported by this HW. The pointer to this array is stored in the adf_tl_hw_data data structure called slice_cnt. The array slice_cnt is then used in the function tl_print_dev_data() to report in debugfs only statistics about the supported accelerators. An incorrect value of the elements in slice_cnt might lead to an out of bounds memory read. At the moment, there isn't an implementation of FW that returns a wrong value, but for robustness validate the slice count array returned by FW.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix invalid reads in fence signaled events Correctly set the length of the drm_event to the size of the structure that's actually used. The length of the drm_event was set to the parent structure instead of to the drm_vmw_event_fence which is supposed to be read. drm_read uses the length parameter to copy the event to the user space thus resuling in oob reads.

In the Linux kernel, the following vulnerability has been resolved: net: fix out-of-bounds access in ops_init net_alloc_generic is called by net_alloc, which is called without any locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It is read twice, first to allocate an array, then to set s.len, which is later used to limit the bounds of the array access. It is possible that the array is allocated and another thread is registering a new pernet ops, increments max_gen_ptrs, which is then used to set s.len with a larger than allocated length for the variable array. Fix it by reading max_gen_ptrs only once in net_alloc_generic. If max_gen_ptrs is later incremented, it will be caught in net_assign_generic.

In the Linux kernel, the following vulnerability has been resolved: blk-iocost: avoid out of bounds shift UBSAN catches undefined behavior in blk-iocost, where sometimes iocg->delay is shifted right by a number that is too large, resulting in undefined behavior on some architectures. [ 186.556576] ------------[ cut here ]------------ UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23 shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long') CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S E N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1 Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020 Call Trace: <IRQ> dump_stack_lvl+0x8f/0xe0 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 iocg_kick_delay+0x30b/0x310 ioc_timer_fn+0x2fb/0x1f80 __run_timer_base+0x1b6/0x250 ... Avoid that undefined behavior by simply taking the "delay = 0" branch if the shift is too large. I am not sure what the symptoms of an undefined value delay will be, but I suspect it could be more than a little annoying to debug.

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies syzbot reported unsafe calls to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078 CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfd/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f7fac07fd89 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89 RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

In the Linux kernel, the following vulnerability has been resolved: s390/cio: Ensure the copied buf is NUL terminated Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from userspace to that buffer. Later, we use scanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using scanf. Fix this issue by using memdup_user_nul instead.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg Check bounds against the end of the BO whenever we access the msg.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix not validating setsockopt user input syzbot reported rfcomm_sock_setsockopt_old() is copying data without checking user input length. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old net/bluetooth/rfcomm/sock.c:632 [inline] BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70 net/bluetooth/rfcomm/sock.c:673 Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064

In the Linux kernel, the following vulnerability has been resolved: rcu: Fix rcu_read_unlock() deadloop due to softirq Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()") removes the recursion-protection code from __rcu_read_unlock(). Therefore, we could invoke the deadloop in raise_softirq_irqoff() with ftrace enabled as follows: WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180 Modules linked in: my_irq_work(O) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180 RSP: 0018:ffffc900000034a8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329 RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000 R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054 FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 __is_insn_slot_addr+0x54/0x70 kernel_text_address+0x48/0xc0 __kernel_text_address+0xd/0x40 unwind_get_return_address+0x1e/0x40 arch_stack_walk+0x9c/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 __raise_softirq_irqoff+0x61/0x80 __flush_smp_call_function_queue+0x115/0x420 __sysvec_call_function_single+0x17/0xb0 sysvec_call_function_single+0x8c/0xc0 </IRQ> Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work") fixed the infinite loop in rcu_read_unlock_special() for IRQ work by setting a flag before calling irq_work_queue_on(). We fix this issue by setting the same flag before calling raise_softirq_irqoff() and rename the flag to defer_qs_pending for more common.

In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Prevent OOB reads when parsing IB Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the bounds checks.

In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix oops in write-retry from mis-resetting the subreq iterator Fix the resetting of the subrequest iterator in netfs_retry_write_stream() to use the iterator-reset function as the iterator may have been shortened by a previous retry. In such a case, the amount of data to be written by the subrequest is not "subreq->len" but "subreq->len - subreq->transferred". Without this, KASAN may see an error in iov_iter_revert(): BUG: KASAN: slab-out-of-bounds in iov_iter_revert lib/iov_iter.c:633 [inline] BUG: KASAN: slab-out-of-bounds in iov_iter_revert+0x443/0x5a0 lib/iov_iter.c:611 Read of size 4 at addr ffff88802912a0b8 by task kworker/u32:7/1147 CPU: 1 UID: 0 PID: 1147 Comm: kworker/u32:7 Not tainted 6.15.0-rc6-syzkaller-00052-g9f35e33144ae #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events_unbound netfs_write_collection_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 iov_iter_revert lib/iov_iter.c:633 [inline] iov_iter_revert+0x443/0x5a0 lib/iov_iter.c:611 netfs_retry_write_stream fs/netfs/write_retry.c:44 [inline] netfs_retry_writes+0x166d/0x1a50 fs/netfs/write_retry.c:231 netfs_collect_write_results fs/netfs/write_collect.c:352 [inline] netfs_write_collection_worker+0x23fd/0x3830 fs/netfs/write_collect.c:374 process_one_work+0x9cf/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>

In the Linux kernel, the following vulnerability has been resolved: dma-mapping: benchmark: fix node id validation While validating node ids in map_benchmark_ioctl(), node_possible() may be provided with invalid argument outside of [0,MAX_NUMNODES-1] range leading to: BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971 CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) kasan_report (mm/kasan/report.c:603) kasan_check_range (mm/kasan/generic.c:189) variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline] arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline] _test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline] node_state (include/linux/nodemask.h:423) [inline] map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Compare node ids with sane bounds first. NUMA_NO_NODE is considered a special valid case meaning that benchmarking kthreads won't be bound to a cpuset of a given node. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: arm64: mops: Do not dereference src reg for a set operation The source register is not used for SET* and reading it can result in a UBSAN out-of-bounds array access error, specifically when the MOPS exception is taken from a SET* sequence with XZR (reg 31) as the source. Architecturally this is the only case where a src/dst/size field in the ESR can be reported as 31. Prior to 2de451a329cf662b the code in do_el0_mops() was benign as the use of pt_regs_read_reg() prevented the out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: X.509: Fix out-of-bounds access when parsing extensions Leo reports an out-of-bounds access when parsing a certificate with empty Basic Constraints or Key Usage extension because the first byte of the extension is read before checking its length. Fix it. The bug can be triggered by an unprivileged user by submitting a specially crafted certificate to the kernel through the keyrings(7) API. Leo has demonstrated this with a proof-of-concept program responsibly disclosed off-list.

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add missing secure storage access fixups for donated memory There are special cases where secure storage access exceptions happen in a kernel context for pages that don't have the PG_arch_1 bit set. That bit is set for non-exported guest secure storage (memory) but is absent on storage donated to the Ultravisor since the kernel isn't allowed to export donated pages. Prior to this patch we would try to export the page by calling arch_make_folio_accessible() which would instantly return since the arch bit is absent signifying that the page was already exported and no further action is necessary. This leads to secure storage access exception loops which can never be resolved. With this patch we unconditionally try to export and if that fails we fixup.

In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix for out-of bound access error Selfgen stats are placed in a buffer using print_array_to_buf_index() function. Array length parameter passed to the function is too big, resulting in possible out-of bound memory error. Decreasing buffer size by one fixes faulty upper bound of passed array. Discovered in coverity scan, CID 1600742 and CID 1600758

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff) page_type: f5(slab) raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 000fffffc0000040 ffff888001042000 00000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: reject zero-length fixed buffer import validate_fixed_range() admits buf_addr at the exact end of the registered region when len is zero, because the check uses strict greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed() then computes offset == imu->len, which causes the bvec skip logic to advance past the last bio_vec entry and read bv_offset from out-of-bounds slab memory. Return early from io_import_fixed() when len is zero. A zero-length import has no data to transfer and should not walk the bvec array at all. BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0 Read of size 4 at addr ffff888002bcc254 by task poc/103 Call Trace: io_import_reg_buf+0x697/0x7f0 io_write_fixed+0xd9/0x250 __io_issue_sqe+0xad/0x710 io_issue_sqe+0x7d/0x1100 io_submit_sqes+0x86a/0x23c0 __do_sys_io_uring_enter+0xa98/0x1590 Allocated by task 103: The buggy address is located 12 bytes to the right of allocated 584-byte region [ffff888002bcc000, ffff888002bcc248)

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise When user provides a bogus pat_index value through the madvise IOCTL, the xe_pat_index_get_coh_mode() function performs an array access without validating bounds. This allows a malicious user to trigger an out-of-bounds kernel read from the xe->pat.table array. The vulnerability exists because the validation in madvise_args_are_sane() directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without first checking if pat_index is within [0, xe->pat.n_entries). Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug builds, it still performs the unsafe array access in production kernels. v2(Matthew Auld) - Using array_index_nospec() to mitigate spectre attacks when the value is used v3(Matthew Auld) - Put the declarations at the start of the block (cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29)

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: <TASK> dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value.

In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both mpls_route_add and mpls_route_del, so there is no issue, but that additional check must not be removed.

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix incorrect structure access In line: upper = info->upper_dev; We access upper_dev field, which is related only for particular events (e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory access for another events, when ptr is not netdev_notifier_changeupper_info. The KASAN logs are as follows: [ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778 [ 30.139866] [ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6 [ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 30.153056] Call trace: [ 30.155547] dump_backtrace+0x0/0x2c0 [ 30.159320] show_stack+0x18/0x30 [ 30.162729] dump_stack_lvl+0x68/0x84 [ 30.166491] print_address_description.constprop.0+0x74/0x2b8 [ 30.172346] kasan_report+0x1e8/0x250 [ 30.176102] __asan_load8+0x98/0xe0 [ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera] [ 30.193313] raw_notifier_call_chain+0x74/0xa0 [ 30.197860] call_netdevice_notifiers_info+0x68/0xc0 [ 30.202924] register_netdevice+0x3cc/0x760 [ 30.207190] register_netdev+0x24/0x50 [ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera]

In the Linux kernel, the following vulnerability has been resolved: vduse: check that offset is within bounds in get_config() This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe.

In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Don't generate an interrupt on bus reset Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix OOB Read in qrtr_endpoint_post Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block.