The Apache Qpid Broker for Java can be configured to use different so called AuthenticationProviders to handle user authentication. Among the choices are the SCRAM-SHA-1 and SCRAM-SHA-256 AuthenticationProvider types. It was discovered that these AuthenticationProviders in Apache Qpid Broker for Java 6.0.x before 6.0.6 and 6.1.x before 6.1.1 prematurely terminate the SCRAM SASL negotiation if the provided user name does not exist thus allowing remote attacker to determine the existence of user accounts. The Vulnerability does not apply to AuthenticationProviders other than SCRAM-SHA-1 and SCRAM-SHA-256.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Software Foundation Apache Traffic Server.This issue affects Apache Traffic Server: from 8.0.0 through 9.2.0. 8.x users should upgrade to 8.1.7 or later versions 9.x users should upgrade to 9.2.1 or later versions

Improper Input Validation vulnerability in Apache Software Foundation Apache Airflow Drill Provider.This issue affects Apache Airflow Drill Provider: before 2.3.2.

Improper Input Validation vulnerability in Apache Software Foundation Apache Airflow Spark Provider.This issue affects Apache Airflow Spark Provider: before 4.0.1.

A possible arbitrary file read and SSRF vulnerability has been identified in Apache Kafka Client. Apache Kafka Clients accept configuration data for setting the SASL/OAUTHBEARER connection with the brokers, including "sasl.oauthbearer.token.endpoint.url" and "sasl.oauthbearer.jwks.endpoint.url". Apache Kafka allows clients to read an arbitrary file and return the content in the error log, or sending requests to an unintended location. In applications where Apache Kafka Clients configurations can be specified by an untrusted party, attackers may use the "sasl.oauthbearer.token.endpoint.url" and "sasl.oauthbearer.jwks.endpoint.url" configuratin to read arbitrary contents of the disk and environment variables or make requests to an unintended location. In particular, this flaw may be used in Apache Kafka Connect to escalate from REST API access to filesystem/environment/URL access, which may be undesirable in certain environments, including SaaS products. Since Apache Kafka 3.9.1/4.0.0, we have added a system property ("-Dorg.apache.kafka.sasl.oauthbearer.allowed.urls") to set the allowed urls in SASL JAAS configuration. In 3.9.1, it accepts all urls by default for backward compatibility. However in 4.0.0 and newer, the default value is empty list and users have to set the allowed urls explicitly.

A vulnerability in Apache CXF before versions 3.5.5 and 3.4.10 allows an attacker to perform a remote directory listing or code exfiltration. The vulnerability only applies when the CXFServlet is configured with both the static-resources-list and redirect-query-check attributes. These attributes are not supposed to be used together, and so the vulnerability can only arise if the CXF service is misconfigured.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Software Foundation Apache Traffic Server.This issue affects Apache Traffic Server: 8.0.0 to 9.2.0.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache DolphinScheduler.This issue affects Apache DolphinScheduler: before 3.2.1. Users are recommended to upgrade to version 3.2.1, which fixes the issue. At the time of disclosure of this advisory, this version has not yet been released. In the mean time, we recommend you make sure the logs are only available to trusted operators.

A vulnerability in Apache Linkis. Problem Description When using the JDBC engine and da When using the JDBC engine and data source functionality, if the URL parameter configured on the frontend has undergone multiple rounds of URL encoding, it may bypass the system's checks. This bypass can trigger a vulnerability that allows unauthorized access to system files via JDBC parameters. Scope of Impact This issue affects Apache Linkis: from 1.3.0 through 1.7.0. Severity level moderate Solution Continuously check if the connection information contains the "%" character; if it does, perform URL decoding. Users are recommended to upgrade to version 1.8.0, which fixes the issue. More questions about this vulnerability can be discussed here:  https://lists.apache.org/list?dev@linkis.apache.org:2025-9:cve

Exposure of Sensitive Information to an Unauthorized Actor, Insertion of Sensitive Information into Log File vulnerability in the OpenIdAuthorizer of Apache IoTDB. This issue affects Apache IoTDB: from 0.10.0 through 1.3.3, from 2.0.1-beta before 2.0.2. Users are recommended to upgrade to version 1.3.4 and 2.0.2, which fix the issue.

Exposure of Sensitive Information to an Unauthorized Actor, Insertion of Sensitive Information into Log File vulnerability in Apache IoTDB JDBC driver. This issue affects iotdb-jdbc: from 0.10.0 through 1.3.3, from 2.0.1-beta before 2.0.2. Users are recommended to upgrade to version 2.0.2 and 1.3.4, which fix the issue.

Exposure of Sensitive Information to an Unauthorized Actor in Apache ServiceComb Service-Center.This issue affects Apache ServiceComb Service-Center before 2.1.0 (include). Users are recommended to upgrade to version 2.2.0, which fixes the issue.

A vulnerability in Batik of Apache XML Graphics allows an attacker to run Java code from untrusted SVG via JavaScript. This issue affects Apache XML Graphics prior to 1.16. Users are recommended to upgrade to version 1.16.

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component. The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component. The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component. The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADER_QUERY) whose value was the plain string QUERY (and RETURN_LUCENE_DOCS for HEADER_RETURN_LUCENE_DOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURN_LUCENE_DOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURN_LUCENE_DOCS'), then setHeader('QUERY', constant(...)) at the start of the route).

Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

When responding to new h2c connection requests, Apache Tomcat versions 10.0.0-M1 to 10.0.0, 9.0.0.M1 to 9.0.41 and 8.5.0 to 8.5.61 could duplicate request headers and a limited amount of request body from one request to another meaning user A and user B could both see the results of user A's request.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Wicket. This issue affects Apache Wicket: from 8.0.0 through 8.17.0, from 9.0.0 through 9.22.0, from 10.0.0 through 10.8.0. Users are recommended to upgrade to version 10.9.0, which fixes the issue.

A vulnerability in Batik of Apache XML Graphics allows an attacker to run untrusted Java code from an SVG. This issue affects Apache XML Graphics prior to 1.16. It is recommended to update to version 1.16.

Server-Side Request Forgery (SSRF) vulnerability in Batik of Apache XML Graphics allows an attacker to access files using a Jar url. This issue affects Apache XML Graphics Batik 1.14.

Apache HTTP Server 2.4.53 and earlier may return lengths to applications calling r:wsread() that point past the end of the storage allocated for the buffer.

A vulnerability in UI of Apache Airflow allows an attacker to view unmasked secrets in rendered template values for tasks which were not executed (for example when they were depending on past and previous instances of the task failed). This issue affects Apache Airflow prior to 2.3.1.

Improper Input Validation vulnerability in Apache Zeppelin. The fix for JDBC URL validation in CVE-2024-31864 did not account for URL encoded input. This issue affects Apache Zeppelin: from 0.11.1 before 0.12.0. Users are recommended to upgrade to version 0.12.0, which fixes the issue.

Exposure of Sensitive Information to an Unauthorized Actor, Insecure Storage of Sensitive Information vulnerability in Maven Archetype Plugin. This issue affects Maven Archetype Plugin: from 3.2.1 before 3.3.0. Users are recommended to upgrade to version 3.3.0, which fixes the issue. Archetype integration testing creates a file called ./target/classes/archetype-it/archetype-settings.xml This file contains all the content from the users ~/.m2/settings.xml file, which often contains information they do not want to publish. We expect that on many developer machines, this also contains credentials. When the user runs mvn verify again (without a mvn clean), this file becomes part of the final artifact. If a developer were to publish this into Maven Central or any other remote repository (whether as a release or a snapshot) their credentials would be published without them knowing.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache HertzBeat. This issue affects Apache HertzBeat: before 1.6.1. Users are recommended to upgrade to version 1.6.1, which fixes the issue.

Server-Side Request Forgery (SSRF) in Apache HTTP Server on Windows allows to potentially leak NTLM hashes to a malicious server via  mod_rewrite or apache expressions that pass unvalidated request input. This issue affects Apache HTTP Server: from 2.4.0 through 2.4.63. Note:  The Apache HTTP Server Project will be setting a higher bar for accepting vulnerability reports regarding SSRF via UNC paths. The server offers limited protection against administrators directing the server to open UNC paths. Windows servers should limit the hosts they will connect over via SMB based on the nature of NTLM authentication.

SSRF in Apache HTTP Server on Windows with mod_rewrite in server/vhost context, allows to potentially leak NTML hashes to a malicious server via SSRF and malicious requests. Users are recommended to upgrade to version 2.4.62 which fixes this issue. 

Potential SSRF in mod_rewrite in Apache HTTP Server 2.4.59 and earlier allows an attacker to cause unsafe RewriteRules to unexpectedly setup URL's to be handled by mod_proxy. Users are recommended to upgrade to version 2.4.60, which fixes this issue.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Pinot. This issue affects Apache Pinot: from 0.1 before 1.0.0. Users are recommended to upgrade to version 1.0.0 and configure RBAC, which fixes the issue. Details:  When using a request to path “/appconfigs” to the controller, it can lead to the disclosure of sensitive information such as system information (e.g. arch, os version), environment information (e.g. maxHeapSize) and Pinot configurations (e.g. zookeeper path). This issue was addressed by the Role-based Access Control https://docs.pinot.apache.org/operators/tutorials/authentication/basic-auth-access-control , so that /appConfigs` and all other APIs can be access controlled. Only authorized users have access to it. Note the user needs to add the admin role accordingly to the RBAC guide to control access to this endpoint, and in the future version of Pinot, a default admin role is planned to be added.

SSRF in Apache HTTP Server on Windows allows to potentially leak NTLM hashes to a malicious server via SSRF and malicious requests or content Users are recommended to upgrade to version 2.4.60 which fixes this issue.  Note: Existing configurations that access UNC paths will have to configure new directive "UNCList" to allow access during request processing.

Import functionality is vulnerable to DNS rebinding attacks between verification and processing of the URL.  Project administrators can run these imports, which could cause Allura to read from internal services and expose them. This issue affects Apache Allura from 1.0.1 through 1.16.0. Users are recommended to upgrade to version 1.17.0, which fixes the issue. If you are unable to upgrade, set "disable_entry_points.allura.importers = forge-tracker, forge-discussion" in your .ini config file.

A SSRF vulnerability in WADL service description in versions of Apache CXF before 4.0.5, 3.6.4 and 3.5.9 allows an attacker to perform SSRF style attacks on REST webservices. The attack only applies if a custom stylesheet parameter is configured.

Server-Side Request Forgery (SSRF) vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 24.09.06. Users are recommended to upgrade to version 24.09.06, which fixes the issue.

While investigating bug 64830 it was discovered that Apache Tomcat 10.0.0-M1 to 10.0.0-M9, 9.0.0-M1 to 9.0.39 and 8.5.0 to 8.5.59 could re-use an HTTP request header value from the previous stream received on an HTTP/2 connection for the request associated with the subsequent stream. While this would most likely lead to an error and the closure of the HTTP/2 connection, it is possible that information could leak between requests.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 24.09.06. Users are recommended to upgrade to version 24.09.06, which fixes the issue.

In Apache Traffic Control Traffic Ops prior to 6.1.0 or 5.1.6, an unprivileged user who can reach Traffic Ops over HTTPS can send a specially-crafted POST request to /user/login/oauth to scan a port of a server that Traffic Ops can reach.

Arbitrary file properties reading vulnerability in Apache Software Foundation Apache OFBiz when user operates an uri call without authorizations. The same uri can be operated to realize a SSRF attack also without authorizations. Users are recommended to upgrade to version 18.12.11, which fixes this issue.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Solr.This issue affects Apache Solr: from 6.0.0 through 8.11.2, from 9.0.0 before 9.4.1. Solr Streaming Expressions allows users to extract data from other Solr Clouds, using a "zkHost" parameter. When original SolrCloud is setup to use ZooKeeper credentials and ACLs, they will be sent to whatever "zkHost" the user provides. An attacker could setup a server to mock ZooKeeper, that accepts ZooKeeper requests with credentials and ACLs and extracts the sensitive information, then send a streaming expression using the mock server's address in "zkHost". Streaming Expressions are exposed via the "/streaming" handler, with "read" permissions. Users are recommended to upgrade to version 8.11.3 or 9.4.1, which fix the issue. From these versions on, only zkHost values that have the same server address (regardless of chroot), will use the given ZooKeeper credentials and ACLs when connecting.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache DolphinScheduler. The information exposed to unauthorized actors may include sensitive data such as database credentials. Users who can't upgrade to the fixed version can also set environment variable `MANAGEMENT_ENDPOINTS_WEB_EXPOSURE_INCLUDE=health,metrics,prometheus` to workaround this, or add the following section in the `application.yaml` file ``` management:   endpoints:     web:       exposure:         include: health,metrics,prometheus ``` This issue affects Apache DolphinScheduler: from 3.0.0 before 3.0.2. Users are recommended to upgrade to version 3.0.2, which fixes the issue.

Server-Side Request Forgery (SSRF) vulnerability in Apache ServiceComb Service-Center. Attackers can obtain sensitive server information through specially crafted requests.This issue affects Apache ServiceComb before 2.1.0(include). Users are recommended to upgrade to version 2.2.0, which fixes the issue.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Traffic Server.This issue affects Apache Traffic Server: from 8.0.0 through 8.1.8, from 9.0.0 through 9.2.2. Users are recommended to upgrade to version 8.1.9 or 9.2.3, which fixes the issue.

Apache Airflow Spark Provider, versions before 4.1.3, is affected by a vulnerability that allows an attacker to pass in malicious parameters when establishing a connection giving an opportunity to read files on the Airflow server. It is recommended to upgrade to a version that is not affected.

Improper Input Validation vulnerability in Apache Software Foundation Apache Airflow Drill Provider. Apache Airflow Drill Provider is affected by a vulnerability that allows an attacker to pass in malicious parameters when establishing a connection with DrillHook giving an opportunity to read files on the Airflow server. This issue affects Apache Airflow Drill Provider: before 2.4.3. It is recommended to upgrade to a version that is not affected.

In Apache Airflow versions before 3.1.6, when rendered template fields in a Dag exceed [core] max_templated_field_length, sensitive values could be exposed in cleartext in the Rendered Templates UI. This occurred because serialization of those fields used a secrets masker instance that did not include user-registered mask_secret() patterns, so secrets were not reliably masked before truncation and display. Users are recommended to upgrade to 3.1.6 or later, which fixes this issue

All versions of Apache Santuario - XML Security for Java prior to 2.2.3 and 2.1.7 are vulnerable to an issue where the "secureValidation" property is not passed correctly when creating a KeyInfo from a KeyInfoReference element. This allows an attacker to abuse an XPath Transform to extract any local .xml files in a RetrievalMethod element.

Improper Input Validation vulnerability in header parsing of Apache Traffic Server allows an attacker to request secure resources. This issue affects Apache Traffic Server 8.0.0 to 9.1.2.

missing input validation in Apache Hama may cause information disclosure through path traversal and XSS. Since Apache Hama is EOL, we do not expect these issues to be fixed.

When using tasks to read config files, there is a risk of database password disclosure. We recommend you upgrade to version 2.0.6 or higher.

Information Exposure vulnerability in context asset handling of Apache Tapestry allows an attacker to download files inside WEB-INF if using a specially-constructed URL. This was caused by an incomplete fix for CVE-2020-13953. This issue affects Apache Tapestry Apache Tapestry 5.4.0 version to Apache Tapestry 5.6.3; Apache Tapestry 5.7.0 version and Apache Tapestry 5.7.1.