A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.

An issue was discovered in phpseclib 1.x before 1.0.23, 2.x before 2.0.47, and 3.x before 3.0.36. An attacker can construct a malformed certificate containing an extremely large prime to cause a denial of service (CPU consumption for an isPrime primality check). NOTE: this issue was introduced when attempting to fix CVE-2023-27560.

Insufficient file size checks resulted in a denial of service risk in the file picker's unzip functionality.

Microsoft QUIC Denial of Service Vulnerability

client_golang is the instrumentation library for Go applications in Prometheus, and the promhttp package in client_golang provides tooling around HTTP servers and clients. In client_golang prior to version 1.11.1, HTTP server is susceptible to a Denial of Service through unbounded cardinality, and potential memory exhaustion, when handling requests with non-standard HTTP methods. In order to be affected, an instrumented software must use any of `promhttp.InstrumentHandler*` middleware except `RequestsInFlight`; not filter any specific methods (e.g GET) before middleware; pass metric with `method` label name to our middleware; and not have any firewall/LB/proxy that filters away requests with unknown `method`. client_golang version 1.11.1 contains a patch for this issue. Several workarounds are available, including removing the `method` label name from counter/gauge used in the InstrumentHandler; turning off affected promhttp handlers; adding custom middleware before promhttp handler that will sanitize the request method given by Go http.Request; and using a reverse proxy or web application firewall, configured to only allow a limited set of methods.

nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. The `nimiq-network-libp2p` subcrate of nimiq/core-rs-albatross is vulnerable to a Denial of Service (DoS) attack due to uncontrolled memory allocation. Specifically, the implementation of the `Discovery` network message handling allocates a buffer based on a length value provided by the peer, without enforcing an upper bound. Since this length is a `u32`, a peer can trigger allocations of up to 4 GB, potentially leading to memory exhaustion and node crashes. As Discovery messages are regularly exchanged for peer discovery, this vulnerability can be exploited repeatedly. The patch for this vulnerability is formally released as part of v1.1.0. The patch implements a limit to the discovery message size of 1 MB and also resizes the message buffer size incrementally as the data is read. No known workarounds are available.

DHCP Server Service Denial of Service Vulnerability

AutomationDirect DirectLOGIC is vulnerable to a a specially crafted packet can be sent continuously to the PLC to prevent access from DirectSoft and other devices, causing a denial-of-service condition. This issue affects: AutomationDirect DirectLOGIC D0-06 series CPUs D0-06DD1 versions prior to 2.72; D0-06DD2 versions prior to 2.72; D0-06DR versions prior to 2.72; D0-06DA versions prior to 2.72; D0-06AR versions prior to 2.72; D0-06AA versions prior to 2.72; D0-06DD1-D versions prior to 2.72; D0-06DD2-D versions prior to 2.72; D0-06DR-D versions prior to 2.72;

A vulnerability has been identified in SIMATIC ET 200AL IM 157-1 PN (6ES7157-1AB00-0AB0) (All versions), SIMATIC ET 200MP IM 155-5 PN HF (6ES7155-5AA00-0AC0) (All versions >= V4.2.0), SIMATIC ET 200SP IM 155-6 MF HF (6ES7155-6MU00-0CN0) (All versions), SIMATIC ET 200SP IM 155-6 PN HA (incl. SIPLUS variants) (All versions < V1.3), SIMATIC ET 200SP IM 155-6 PN R1 (6ES7155-6AU00-0HM0) (All versions < V6.0.1), SIMATIC ET 200SP IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0) (All versions >= V4.2.0), SIMATIC ET 200SP IM 155-6 PN/3 HF (6ES7155-6AU30-0CN0) (All versions < V4.2.2), SIMATIC PN/MF Coupler (6ES7158-3MU10-0XA0) (All versions), SIMATIC PN/PN Coupler (6ES7158-3AD10-0XA0) (All versions < V6.0.0), SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-2AC0) (All versions >= V4.2.0), SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-7AC0) (All versions >= V4.2.0), SIPLUS ET 200MP IM 155-5 PN HF T1 RAIL (6AG2155-5AA00-1AC0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-2CN0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-7CN0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF T1 RAIL (6AG2155-6AU01-1CN0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF TX RAIL (6AG2155-6AU01-4CN0) (All versions >= V4.2.0), SIPLUS NET PN/PN Coupler (6AG2158-3AD10-4XA0) (All versions < V6.0.0). Affected devices do not properly handle S7 protocol session disconnect requests. When receiving a valid S7 protocol Disconnect Request (COTP DR TPDU) on TCP port 102, the devices enter an improper session state. This could allow an attacker to cause the device to become unresponsive, leading to a denial-of-service condition that requires a power cycle to restore normal operation.

When a POST request comes through AJP and the request exceeds the max-post-size limit (maxEntitySize), Undertow's AjpServerRequestConduit implementation closes a connection without sending any response to the client/proxy. This behavior results in that a front-end proxy marking the backend worker (application server) as an error state and not forward requests to the worker for a while. In mod_cluster, this continues until the next STATUS request (10 seconds intervals) from the application server updates the server state. So, in the worst case, it can result in "All workers are in error state" and mod_cluster responds "503 Service Unavailable" for a while (up to 10 seconds). In mod_proxy_balancer, it does not forward requests to the worker until the "retry" timeout passes. However, luckily, mod_proxy_balancer has "forcerecovery" setting (On by default; this parameter can force the immediate recovery of all workers without considering the retry parameter of the workers if all workers of a balancer are in error state.). So, unlike mod_cluster, mod_proxy_balancer does not result in responding "503 Service Unavailable". An attacker could use this behavior to send a malicious request and trigger server errors, resulting in DoS (denial of service). This flaw was fixed in Undertow 2.2.19.Final, Undertow 2.3.0.Alpha2.

A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to a Collapse of Data into Unsafe Value bug ,Squid may be vulnerable to a Denial of Service attack against HTTP header parsing. This problem allows a remote client or a remote server to perform Denial of Service when sending oversized headers in HTTP messages. In versions of Squid prior to 6.5 this can be achieved if the request_header_max_size or reply_header_max_size settings are unchanged from the default. In Squid version 6.5 and later, the default setting of these parameters is safe. Squid will emit a critical warning in cache.log if the administrator is setting these parameters to unsafe values. Squid will not at this time prevent these settings from being changed to unsafe values. Users are advised to upgrade to version 6.5. There are no known workarounds for this vulnerability. This issue is also tracked as SQUID-2024:2

Uncontrolled Resource Consumption in GitHub repository causefx/organizr prior to 2.1.2000. This vulnerability can be abused by doing a DDoS attack for which genuine users will not able to access resources/applications.

A vulnerability was found in CRI-O that causes memory or disk space exhaustion on the node for anyone with access to the Kube API. The ExecSync request runs commands in a container and logs the output of the command. This output is then read by CRI-O after command execution, and it is read in a manner where the entire file corresponding to the output of the command is read in. Thus, if the output of the command is large it is possible to exhaust the memory or the disk space of the node when CRI-O reads the output of the command. The highest threat from this vulnerability is system availability.

A vulnerability classified as problematic was found in JeecgBoot up to 3.8.0. This vulnerability affects the function unzipFile of the file /jeecg-boot/airag/knowledge/doc/import/zip of the component Document Library Upload. The manipulation of the argument File leads to resource consumption. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

DHCP Server Service Denial of Service Vulnerability

libheif <= 1.17.6 contains a memory leak in the function JpegEncoder::Encode. This flaw allows an attacker to cause a denial of service attack.

In Eclipse Jetty, versions 12.0.0-12.0.31 and 12.1.0-12.0.5, class GzipHandler exposes a vulnerability when a compressed HTTP request, with Content-Encoding: gzip, is processed and the corresponding response is not compressed. This happens because the JDK Inflater is allocated for decompressing the request, but it is not released because the release mechanism is tied to the compressed response. In this case, since the response is not compressed, the release mechanism does not trigger, causing the leak.

An issue was discovered in L2 in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 1080, 2400, 1580, 9110, W920, W930, Modem 5123, and Modem 5400. Incorrect handling of RRC packets leads to a Denial of Service.

An issue in Realtek RTL8762EKF-EVB RTL8762E SDK v1.4.0 allows attackers to cause a Denial of Service (DoS) via sending a crafted before a pairing public key is received during a Bluetooth connection attempt.

An issue in Texas Instruments LP-CC2652RB SimpleLink CC13XX CC26XX SDK 7.41.00.17 allows attackers to cause a Denial of Service (DoS) via sending a crafted LL_Pause_Enc_Req packet during the authentication and connection phase, causing a Denial of Service (DoS).

libgit2 is a portable C implementation of the Git core methods provided as a linkable library with a solid API, allowing to build Git functionality into your application. Using well-crafted inputs to `git_revparse_single` can cause the function to enter an infinite loop, potentially causing a Denial of Service attack in the calling application. The revparse function in `src/libgit2/revparse.c` uses a loop to parse the user-provided spec string. There is an edge-case during parsing that allows a bad actor to force the loop conditions to access arbitrary memory. Potentially, this could also leak memory if the extracted rev spec is reflected back to the attacker. As such, libgit2 versions before 1.4.0 are not affected. Users should upgrade to version 1.6.5 or 1.7.2.

An issue was discovered in Mbed TLS 3.5.1. There is persistent handshake denial if a client sends a TLS 1.3 ClientHello without extensions.

A reachable assertion in the decode_access_point_name_ie function of Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) allows attackers to cause a Denial of Service (DoS) via a crafted NAS packet.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit repeated connections from clients with the same IP Repeated connections from clients with the same IP address may exhaust the max connections and prevent other normal client connections. This patch limit repeated connections from clients with the same IP.

CVE-2026-0517 is a denial-of-service vulnerability in versions of Secure Access Server prior to 14.20. An attacker can send a specially crafted packet to a server and cause the server to crash

Denial-of-service in the DOM: Service Workers component. This vulnerability was fixed in Firefox 147 and Thunderbird 147.

An unauthenticated remote attacker can use an uncontrolled resource consumption vulnerability to DoS the affected devices through excessive traffic on a single ethernet port. 

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.3, excessive memory use during pgsql parsing could lead to OOM-related crashes. This vulnerability is patched in 7.0.3. As workaround, users can disable the pgsql app layer parser.

The Stars Rating WordPress plugin before 3.5.1 does not validate the submitted rating, allowing submission of long integer, causing a Denial of Service in the comments section, or pending comment dashboard depending if the user sent it as unauthenticated or authenticated.

A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive step limit storm tests, the device reboots

On versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.3, 14.1.x before 14.1.4, 13.1.x before 13.1.4, 12.1.x before 12.1.6, and 11.6.x before 11.6.5.3, when the BIG-IP system is buffering packet fragments for reassembly, the Traffic Management Microkernel (TMM) may consume an excessive amount of resources, eventually leading to a restart and failover event. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CXF supports (via JwtRequestCodeFilter) passing OAuth 2 parameters via a JWT token as opposed to query parameters (see: The OAuth 2.0 Authorization Framework: JWT Secured Authorization Request (JAR)). Instead of sending a JWT token as a "request" parameter, the spec also supports specifying a URI from which to retrieve a JWT token from via the "request_uri" parameter. CXF was not validating the "request_uri" parameter (apart from ensuring it uses "https) and was making a REST request to the parameter in the request to retrieve a token. This means that CXF was vulnerable to DDos attacks on the authorization server, as specified in section 10.4.1 of the spec. This issue affects Apache CXF versions prior to 3.4.3; Apache CXF versions prior to 3.3.10.

A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. This vulnerability is triggered during fuzzing of multiple CIP classes, which causes the CIP port to become unresponsive.

A flaw was discovered in Elasticsearch, where processing a document in a deeply nested pipeline on an ingest node could cause the Elasticsearch node to crash.

On BIG-IP version 16.0.x before 16.0.1.2, 15.1.x before 15.1.3, 14.1.x before 14.1.4, 13.1.x before 13.1.4, and 12.1.x before 12.1.6, when an HTTP profile is configured on a virtual server, undisclosed requests can cause a significant increase in system resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability in Pulse Connect Secure before 9.1R12.1 could allow an unauthenticated administrator to causes a denial of service when a malformed request is sent to the device.

A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP Step Limits Storms tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.

A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. After running a Burp Suite active scan, the device loses ICMP connectivity, causing the web application to become inaccessible.

A unauthenticated denial of service vulnerability exists in Citrix ADC <13.0-83.27, <12.1-63.22 and 11.1-65.23 when configured as a VPN (Gateway) or AAA virtual server could allow an attacker to cause a temporary disruption of the Management GUI, Nitro API, and RPC communication.

Requests may be used to interrupt the normal operation of the device. When exploited, Fresenius Kabi Agilia Link+ version 3.0 must be rebooted via a hard reset triggered by pressing a button on the rack system.

The PostgreSQL adapter in Active Record before 6.1.2.1, 6.0.3.5, 5.2.4.5 suffers from a regular expression denial of service (REDoS) vulnerability. Carefully crafted input can cause the input validation in the `money` type of the PostgreSQL adapter in Active Record to spend too much time in a regular expression, resulting in the potential for a DoS attack. This only impacts Rails applications that are using PostgreSQL along with money type columns that take user input.

A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP Step Limit Storm tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.

On BIG-IP APM version 16.0.x before 16.0.1.1, under certain conditions, when processing VPN traffic with APM, TMM consumes excessive memory. A malicious, authenticated VPN user may abuse this to perform a DoS attack against the APM. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

Uncontrolled resource consumption in Windows Standards-Based Storage Management Service allows an unauthorized attacker to deny service over a network.

A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive limited storm tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.

UniFi Protect before v1.17.1 allows an attacker to use spoofed cameras to perform a denial-of-service attack that may cause the UniFi Protect controller to crash.

The actionpack ruby gem (a framework for handling and responding to web requests in Rails) before 6.0.3.7, 6.1.3.2 suffers from a possible denial of service vulnerability in the Mime type parser of Action Dispatch. Carefully crafted Accept headers can cause the mime type parser in Action Dispatch to do catastrophic backtracking in the regular expression engine.

Drupal contains a vulnerability with improper handling of structural elements. If this vulnerability is exploited, an attacker may be able to cause a denial-of-service (DoS) condition.