There is a NULL pointer dereference vulnerability in NI grpc-device in the data moniker service that may allow an attacker to cause a denial of service by triggering a crash.  Successful exploitation requires an attacker to provide an unknown value to the data moniker service. This affects NI grpc-device 2.17.0 and prior versions.

An out of bounds read due to a missing bounds check in LabVIEW may disclose information or result in arbitrary code execution. Successful exploitation requires an attacker to provide a user with a specially crafted VI. This vulnerability affects LabVIEW 2024 Q1 and prior versions.

There is a memory corruption vulnerability due to an out-of-bounds read in mgcore_SH_25_3!aligned_free() in NI LabVIEW.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI file. This vulnerability affects NI LabVIEW 2026 Q1 (26.1.0) and prior versions.

There is a memory corruption vulnerability due to an out-of-bounds read in sentry_transaction_context_set_operation() in NI LabVIEW.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI file. This vulnerability affects NI LabVIEW 2026 Q1 (26.1.0) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in LVResFile::RGetMemFileHandle() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in lvre!ExecPostedProcRecPost() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in lvre!VisaWriteFromFile() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in lvre!DataSizeTDR() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in LVResource::DetachResource() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in LVResFile::FindRsrcListEntry() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is a memory corruption vulnerability due to an out of bounds read in DefaultFontOptions() when using SymbolEditor in NI Circuit Design Suite.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .sym file. This vulnerability affects NI Circuit Design Suite 14.3.1 and prior versions.

There is a memory corruption vulnerability due to an out of bounds read in GetSymbolBorderRectSize() when using the SymbolEditor in NI Circuit Design Suite.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .sym file. This vulnerability affects NI Circuit Design Suite 14.3.0 and prior versions.

An out of bounds read due to improper input validation when loading the font table in fontmgr.cpp in NI LabVIEW may disclose information or result in arbitrary code execution. Successful exploitation requires an attacker to provide a user with a specially crafted VI. This vulnerability affects LabVIEW 2024 Q3 and prior versions.

An out of bounds read due to improper input validation in HeapObjMapImpl.cpp in NI LabVIEW may disclose information or result in arbitrary code execution. Successful exploitation requires an attacker to provide a user with a specially crafted VI. This vulnerability affects LabVIEW 2024 Q3 and prior versions.

An out of bounds read due to improper input validation in BuildFontMap in fontmgr.cpp in NI LabVIEW may disclose information or result in arbitrary code execution. Successful exploitation requires an attacker to provide a user with a specially crafted VI. This vulnerability affects LabVIEW 2024 Q3 and prior versions.

There is a memory corruption vulnerability due to an out of bounds read in Bitmap::InternalDraw() when using the SymbolEditor in NI Circuit Design Suite.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .sym file. This vulnerability affects NI Circuit Design Suite 14.3.0 and prior versions.

The msgpack decoder fails to properly validate the input buffer length when processing truncated fixext data (format codes 0xd4-0xd8). This can lead to an out-of-bounds read and a runtime panic, allowing a denial of service attack.

Transient DOS while processing of a registration acceptance OTA due to incorrect ciphering key data IE.

Missing bounds validation in the MQTT v5.0 property parser in coreMQTT before 5.0.1 allows an MQTT broker to cause a denial of service by sending a crafted packet. To remediate this issue, users should upgrade to v5.0.1.

ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. Libmodsecurity is one component of the ModSecurity v3 project. A segmentation fault occurs when a rule using the t:hexDecode transformation inspects a query string parameter containing a single character. An attacker can exploit this to crash worker processes, causing a denial of service. Service resumes once the attack stops as worker processes recover from the segfault. All versions before 3.0.15 of libModSecurity3 are affected. This has been patched in version 3.0.15.

An out-of-bounds read in the read_global_param() function (libavcodec/av1dec.c) of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input.

The OpenFeature feature toggle evaluation endpoint reads unbounded values into memory, which can cause out-of-memory crashes.

An exploitable denial-of-service vulnerability exists in the traversal of lists functionality of Natus Xltek NeuroWorks 8. A specially crafted network packet can cause an out-of-bounds read, resulting in a denial of service. An attacker can send a malicious packet to trigger this vulnerability.

Issue summary: Applications using AES-CFB128 encryption or decryption on systems with AVX-512 and VAES support can trigger an out-of-bounds read of up to 15 bytes when processing partial cipher blocks. Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application if the input buffer ends at a memory page boundary and the following page is unmapped. There is no information disclosure as the over-read bytes are not written to output. The vulnerable code path is only reached when processing partial blocks (when a previous call left an incomplete block and the current call provides fewer bytes than needed to complete it). Additionally, the input buffer must be positioned at a page boundary with the following page unmapped. CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or ChaCha20-Poly1305 instead. For these reasons the issue was assessed as Low severity according to our Security Policy. Only x86-64 systems with AVX-512 and VAES instruction support are affected. Other architectures and systems without VAES support use different code paths that are not affected. OpenSSL FIPS module in 3.6 version is affected by this issue.

Exiv2 is a C++ library and a command-line utility to read, write, delete and modify Exif, IPTC, XMP and ICC image metadata. Prior to version 0.28.8, an out-of-bounds read was found in Exiv2. The vulnerability is in the preview component, which is only triggered when running Exiv2 with an extra command line argument, like -pp. The out-of-bounds read is at a 4GB offset, which usually causes Exiv2 to crash. This issue has been patched in version 0.28.8.

EVerest is an EV charging software stack. Versions prior to 2026.02.0 have an out-of-bounds access (std::vector) that leads to possible remote crash/memory corruption. This is because the CSMS sends UpdateAllowedEnergyTransferModes over the network. Version 2026.2.0 contains a patch.

A vulnerability was identified in osrg GoBGP up to 4.3.0. Affected by this issue is the function BMPPeerUpNotification.ParseBody/BMPStatisticsReport.ParseBody of the file pkg/packet/bmp/bmp.go of the component BMP Parser. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. Upgrading to version 4.4.0 can resolve this issue. The identifier of the patch is bc77597d42335c78464bc8e15a471d887bbdf260. Upgrading the affected component is recommended.

NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Prior to version 0.24.8, NanoMQ’s MQTT-over-WebSocket transport can be crashed by sending an MQTT packet with a deliberately large Remaining Length in the fixed header while providing a much shorter actual payload. The code path copies Remaining Length bytes without verifying that the current receive buffer contains that many bytes, resulting in an out-of-bounds read (ASAN reports OOB / crash). This is remotely triggerable over the WebSocket listener. This issue has been patched in version 0.24.8.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in gst_wavparse_adtl_chunk within gstwavparse.c. This vulnerability arises due to insufficient validation of the size parameter, which can exceed the bounds of the data buffer. As a result, an OOB read occurs in the following while loop. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10.

The BGP parser in tcpdump before 4.9.3 has a buffer over-read in print-bgp.c:bgp_attr_print() (MP_REACH_NLRI).

The SMB parser in tcpdump before 4.9.3 has buffer over-reads in print-smb.c:print_trans() for \MAILSLOT\BROWSE and \PIPE\LANMAN.

The DCCP parser in tcpdump before 4.9.3 has a buffer over-read in print-dccp.c:dccp_print_option().

The IEEE 802.11 parser in tcpdump before 4.9.3 has a buffer over-read in print-802_11.c for the Mesh Flags subfield.

Windows Lightweight Directory Access Protocol (LDAP) Denial of Service Vulnerability

An issue found in SQLite SQLite3 v.3.35.4 that allows a remote attacker to cause a denial of service via the appendvfs.c function.

The HNCP parser in tcpdump before 4.9.3 has a buffer over-read in print-hncp.c:print_prefix().

The ICMPv6 parser in tcpdump before 4.9.3 has a buffer over-read in print-icmp6.c.

In ng_pkt in transports/smart_pkt.c in libgit2 before 0.26.6 and 0.27.x before 0.27.4, a remote attacker can send a crafted smart-protocol "ng" packet that lacks a '\0' byte to trigger an out-of-bounds read that leads to DoS.

In Alpine Linux apk-tools before 2.12.5, the tarball parser allows a buffer overflow and crash.

Possible buffer out of bound read can occur due to improper validation of TBTT count and length while parsing the beacon response in Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10.

The RSVP parser in tcpdump before 4.9.3 has a buffer over-read in print-rsvp.c:rsvp_obj_print().

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

The VRRP parser in tcpdump before 4.9.3 has a buffer over-read in print-vrrp.c:vrrp_print() for VRRP version 2, a different vulnerability than CVE-2019-15167.

The LDP parser in tcpdump before 4.9.3 has a buffer over-read in print-ldp.c:ldp_tlv_print().

The BGP parser in tcpdump before 4.9.3 has a buffer over-read in print-bgp.c:bgp_capabilities_print() (BGP_CAPCODE_MP).

The ICMP parser in tcpdump before 4.9.3 has a buffer over-read in print-icmp.c:icmp_print().

The LMP parser in tcpdump before 4.9.3 has a buffer over-read in print-lmp.c:lmp_print_data_link_subobjs().

The IKEv1 parser in tcpdump before 4.9.3 has a buffer over-read in print-isakmp.c:ikev1_n_print().

TensorFlow is an open source platform for machine learning. If `MirrorPadGrad` is given outsize input `paddings`, TensorFlow will give a heap OOB error. We have patched the issue in GitHub commit 717ca98d8c3bba348ff62281fdf38dcb5ea1ec92. The fix will be included in TensorFlow 2.11. We will also cherrypick this commit on TensorFlow 2.10.1, 2.9.3, and TensorFlow 2.8.4, as these are also affected and still in supported range.