Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-grpc grpc (GRPC.Compressor.Gzip, GRPC.Message modules) allows a denial of service via a gzip decompression bomb. This vulnerability is associated with program files lib/grpc/compressor/gzip.ex, lib/grpc/message.ex and program routines 'Elixir.GRPC.Compressor.Gzip':decompress/1, 'Elixir.GRPC.Message':from_data/2. 'Elixir.GRPC.Compressor.Gzip':decompress/1 calls :zlib.gunzip/1 directly on attacker-controlled bytes with no decompressed-size limit, ratio check, or incremental decoding. Because this module is the registered gzip GRPC.Compressor implementation, it is invoked automatically whenever an incoming gRPC frame carries the grpc-encoding: gzip header. :zlib.gunzip/1 allocates the entire decompressed result as a single binary, so a small highly compressible payload (for example a few kilobytes of zeros, which gzip compresses at roughly 1000:1) expands to multiple gigabytes inside a single call. The max_receive_message_length limit is enforced only against the already-decompressed message, so it provides no protection. An unauthenticated remote peer can send a single crafted frame to exhaust the BEAM node's heap and trigger an out-of-memory kill. This issue affects grpc: from 0.4.0 before 1.0.0.

Deserialization of Untrusted Data and Allocation of Resources Without Limits or Throttling vulnerabilities in elixir-grpc grpc allow unauthenticated attackers to crash the BEAM node via atom table exhaustion and, when a decoded term flows into a call site that invokes it, achieve remote code execution on the server. 'Elixir.GRPC.Codec.Erlpack':decode/2 (lib/grpc/codec/erlpack.ex) calls :erlang.binary_to_term/1 on the raw gRPC message body without the :safe option, no size bound, and no type guard. Any unauthenticated peer that sends a request with Content-Type: application/grpc+erlpack can send a crafted payload that mints arbitrary new atoms (which are never garbage-collected, exhausting the bounded atom table and crashing the VM) or that encodes a fun term which, if applied anywhere downstream, executes attacker-controlled code inside the server process. This issue affects grpc from 0.4.0 before 1.0.0.

A denial-of-service vulnerability exists in the NetX IPv6 component functionality of Eclipse ThreadX NetX Duo. A specially crafted network packet of "Packet Too Big" with more than 15 different source address can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.

CryptPad 2025.3.1 allows unbounded WebSocket frame flood. A remote, unauthenticated attacker can significantly degrade or deny service for all users of a CryptPad instance. Fixed in 2026.2.2.

Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.

When a SIP profile is configured on a virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

jsPDF is a library to generate PDFs in JavaScript. Prior to 4.2.0, user control of the first argument of the `addImage` method results in denial of service. If given the possibility to pass unsanitized image data or URLs to the `addImage` method, a user can provide a harmful GIF file that results in out of memory errors and denial of service. Harmful GIF files have large width and/or height entries in their headers, which lead to excessive memory allocation. Other affected methods are: `html`. The vulnerability has been fixed in jsPDF 4.2.0. As a workaround, sanitize image data or URLs before passing it to the addImage method or one of the other affected methods.

spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1.

Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround.

Multer is a node.js middleware for handling `multipart/form-data`. A vulnerability in Multer prior to version 2.1.1 allows an attacker to trigger a Denial of Service (DoS) by sending malformed requests, potentially causing stack overflow. Users should upgrade to version 2.1.1 to receive a patch. No known workarounds are available.

Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.132.Final and 4.2.10.Final, a remote user can trigger a Denial of Service (DoS) against a Netty HTTP/2 server by sending a flood of `CONTINUATION` frames. The server's lack of a limit on the number of `CONTINUATION` frames, combined with a bypass of existing size-based mitigations using zero-byte frames, allows an user to cause excessive CPU consumption with minimal bandwidth, rendering the server unresponsive. Versions 4.1.132.Final and 4.2.10.Final fix the issue.

Allocation of Resources Without Limits or Throttling vulnerability in gleam-wisp wisp allows a denial of service via multipart form body parsing. The multipart_body function bypasses configured max_body_size and max_files_size limits. When a multipart boundary is not present in a chunk, the parser takes the MoreRequiredForBody path, which appends the chunk to the output but passes the quota unchanged to the recursive call. Only the final chunk containing the boundary is counted via decrement_quota. The same pattern exists in multipart_headers, where MoreRequiredForHeaders recurses without calling decrement_body_quota. An unauthenticated attacker can exhaust server memory or disk by sending arbitrarily large multipart form submissions in a single HTTP request. This issue affects wisp: from 0.2.0 before 2.2.2.

Allocation of Resources Without Limits or Throttling vulnerability in elixir-plug plug_cowboy allows unauthenticated remote denial of service via atom table exhaustion. Plug.Cowboy.Conn.conn/1 in lib/plug/cowboy/conn.ex calls String.to_atom/1 on the value returned by :cowboy_req.scheme/1. For HTTP/2 connections, cowlib passes the client-supplied :scheme pseudo-header value through verbatim without validation. Each unique value permanently allocates a new entry in the BEAM atom table. Since atoms are never garbage-collected and the atom table has a fixed limit (default 1,048,576), an unauthenticated attacker can exhaust the table by sending HTTP/2 requests with unique :scheme values, causing the Erlang VM to abort with system_limit and taking down the entire node. This vulnerability does not affect HTTP/1.1, where cowboy derives the scheme from the listener type rather than from a client-supplied header. This issue affects plug_cowboy: from 2.0.0 before 2.8.1.

DeepDiff is a project focused on Deep Difference and search of any Python data. From version 5.0.0 to before version 8.6.2, the pickle unpickler _RestrictedUnpickler validates which classes can be loaded but does not limit their constructor arguments. A few of the types in SAFE_TO_IMPORT have constructors that allocate memory proportional to their input (builtins.bytes, builtins.list, builtins.range). A 40-byte pickle payload can force 10+ GB of memory, which crashes applications that load delta objects or call pickle_load with untrusted data. This issue has been patched in version 8.6.2.

OpenClaw before 2026.3.13 reads and buffers Telegram webhook request bodies before validating the x-telegram-bot-api-secret-token header, allowing unauthenticated attackers to exhaust server resources. Attackers can send POST requests to the webhook endpoint to force memory consumption, socket time, and JSON parsing work before authentication validation occurs.

OpenClaw versions prior to 2026.2.22 fail to consistently enforce configured inbound media byte limits before buffering remote media across multiple channel ingestion paths. Remote attackers can send oversized media payloads to trigger elevated memory usage and potential process instability.

A denial-of-service vulnerability caused by unbounded resource allocation was discovered in the audit logging functionality, due to a missing size limit on input recorded into audit entries. An unauthenticated attacker can submit requests containing excessively large input that is recorded into audit entries, possibly exhausting the available disk space and rendering the system inoperable.

OpenClaw versions prior to 2026.3.2 contain a denial of service vulnerability in webhook handlers for BlueBubbles and Google Chat that parse request bodies before performing authentication and signature validation. Unauthenticated attackers can exploit this by sending slow or oversized request bodies to exhaust parser resources and degrade service availability.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior 9.5.2-alpha.2 and 8.6.15, an unauthenticated attacker can exhaust Parse Server resources (CPU, memory, database connections) through crafted queries that exploit the lack of complexity limits in the REST and GraphQL APIs. All Parse Server deployments using the REST or GraphQL API are affected. This vulnerability is fixed in 9.5.2-alpha.2 and 8.6.15.

OpenClaw versions 2026.2.21-2 up to, but not including, 2026.2.22, and @openclaw/voice-call versions 2026.2.21 up to, but not including, 2026.2.22 accept media-stream WebSocket upgrades before stream validation, allowing unauthenticated clients to establish connections. Remote attackers can hold idle pre-authenticated sockets open to consume connection resources and degrade service availability for legitimate streams.

OpenClaw versions prior to 2026.2.14 contain a denial of service vulnerability in the fetchWithGuard function that allocates entire response payloads in memory before enforcing maxBytes limits. Remote attackers can trigger memory exhaustion by serving oversized responses without content-length headers to cause availability loss.

jackson-core contains core low-level incremental ("streaming") parser and generator abstractions used by Jackson Data Processor. From version 3.0.0 to before version 3.1.0, the UTF8DataInputJsonParser, which is used when parsing from a java.io.DataInput source, bypasses the maxNestingDepth constraint (default: 500) defined in StreamReadConstraints. A similar issue was found in ReaderBasedJsonParser. This allows a user to supply a JSON document with excessive nesting, which can cause a StackOverflowError when the structure is processed, leading to a Denial of Service (DoS). This issue has been patched in version 3.1.0.

OpenClaw versions prior to 2026.3.1 contain an unbounded memory growth vulnerability in the Zalo webhook endpoint that allows unauthenticated attackers to trigger in-memory key accumulation by varying query strings. Remote attackers can exploit this by sending repeated requests with different query parameters to cause memory pressure, process instability, or out-of-memory conditions that degrade service availability.

OpenClaw versions prior to 2026.2.13 contain a denial of service vulnerability in webhook handlers that buffer request bodies without strict byte or time limits. Remote unauthenticated attackers can send oversized JSON payloads or slow uploads to webhook endpoints causing memory pressure and availability degradation.

TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. Versions prior to version 2.02 are vulnerable to a Denial of Service (DoS) attack known as Slowloris. The server spawns a new OS thread for every incoming connection without enforcing a maximum concurrency limit or an appropriate request timeout. An unauthenticated remote attacker can exhaust server concurrency limits and memory by opening numerous connections and sending data exceptionally slowly (e.g. 1 byte every few minutes). Anyone hosting services using TinyWeb is impacted. Version 2.02 fixes the issue. The patch introduces a `CMaxConnections` limit (set to 512) and a `CConnectionTimeoutSecs` idle timeout (set to 30 seconds). As a temporary workaround if upgrading is not immediately possible, consider placing the server behind a robust reverse proxy or Web Application Firewall (WAF) such as nginx, HAProxy, or Cloudflare, configured to buffer incomplete requests and aggressively enforce connection limits and timeouts.

TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. Versions prior to version 2.02 have a Denial of Service (DoS) vulnerability via memory exhaustion. Unauthenticated remote attackers can send an HTTP POST request to the server with an exceptionally large `Content-Length` header (e.g., `2147483647`). The server continuously allocates memory for the request body (`EntityBody`) while streaming the payload without enforcing any maximum limit, leading to all available memory being consumed and causing the server to crash. Anyone hosting services using TinyWeb is impacted. Version 2.02 fixes the issue. The patch introduces a `CMaxEntityBodySize` limit (set to 10MB) for the maximum size of accepted payloads. As a temporary workaround if upgrading is not immediately possible, consider placing the server behind a Web Application Firewall (WAF) or reverse proxy (like nginx or Cloudflare) configured to explicitly limit the maximum allowed HTTP request body size (e.g., `client_max_body_size` in nginx).

Fleet is open source device management software. Prior to 4.81.0, Fleet contained multiple unauthenticated HTTP endpoints that read request bodies without enforcing a size limit. An unauthenticated attacker could exploit this behavior by sending large or repeated HTTP payloads, causing excessive memory allocation and resulting in a denial-of-service (DoS) condition. Version 4.81.0 patches the issue.

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V5.0). The affected application is susceptible to resource exhaustion when subjected to high volume of TCP SYN packets This could allow an attacker to render the service unavailable and cause denial-of-service conditions by overwhelming system resources.

wpDiscuz before 7.6.47 contains an unauthenticated denial of service vulnerability that allows anonymous users to trigger mass notification emails by exploiting the checkNotificationType() function. Attackers can repeatedly call the wpdiscuz-ajax.php endpoint with arbitrary postId and comment_id parameters to flood subscribers with notifications, as the handler lacks nonce verification, authentication checks, and rate limiting.

A denial-of-service security issue exists in 1734 POINT I/O™ module. The security issue stems from improper handling of crafted CIP messages, which can cause the module to enter a faulted state. A restart is required to recover.

Traefik before 2.10.5 and 3.0.0-beta4 is affected by a denial-of-service vulnerability in HTTP/2 request handling inherited from the Go standard library's HTTP/2 implementation (CVE-2023-44487 / CVE-2023-39325, the 'Rapid Reset' technique). A remote attacker can rapidly create and cancel HTTP/2 streams to exhaust server resources and cause service unavailability.

A security issue exists within 432ES-IG3 Series A, which affects GuardLink® EtherNet/IP Interface, resulting in denial-of-service. A manual power cycle is required to recover the device.

jsPDF is a library to generate PDFs in JavaScript. Prior to 3.0.1, user control of the first argument of the addImage method results in CPU utilization and denial of service. If given the possibility to pass unsanitised image urls to the addImage method, a user can provide a harmful data-url that results in high CPU utilization and denial of service. Other affected methods are html and addSvgAsImage. The vulnerability was fixed in jsPDF 3.0.1.

A denial-of-service vulnerability due to improper prioritization of network traffic over protection mechanism exists in Relion 670/650 and SAM600-IO series device that if exploited could potentially cause critical functions like LDCM (Line Distance Communication Module) to malfunction.

A denial-of-service security issue exists in the 1719-AENTR. The security issue stems from improper handling of a UDP unicast network storm, which causes the device to become overloaded and lose communication. A power cycle is required to recover.

Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. Prior to 2.11.0, the streaming worksheet reader used by Rows and GetRows does not enforce the TotalRows limit on the row r attribute, allowing a small XLSX file with a row number above 1048576 and no cell coordinate to make GetRows append empty rows up to the attacker-controlled index and consume excessive memory and CPU. This issue is fixed in version 2.11.0.

Zeek before 8.0.9 contains an uncontrolled memory consumption vulnerability in the FTP analyzer that allows unauthenticated remote attackers to cause process termination by sending a crafted FTP control session negotiating AUTH GSSAPI followed by a large ADAT control line. Attackers can exploit the NVT_Analyzer component's lack of a maximum line length check, causing it to continuously double its internal buffer without bounds during base64 decoding of an attacker-controlled ADAT token, resulting in denial of service of the Zeek sensor.

Eclipse Wakaama before snapshot/2026-05-26 contains an unbounded memory allocation vulnerability in the CoAP Block1 handler within coap/block.c that allows unauthenticated remote attackers to exhaust server memory by sending a sequence of Block1 PUT requests with incrementing block numbers. Attackers can target the registration endpoint over UDP without authentication, causing the server to repeatedly reallocate a growing accumulation buffer by appending each block payload without enforcing any maximum total size limit, resulting in denial of service through memory exhaustion.

Pillow is a Python imaging library. From 8.2.0 through 12.2.0, src/libImaging/Jpeg2KDecode.c accumulates total_component_width across every tile in a JPEG2000 image instead of recomputing it per tile, allowing a crafted tiled JPEG2000 file to force substantially higher transient memory usage and trigger out-of-memory failures during decoding. This issue is fixed in version 12.3.0.

When an HTTP/2 profile is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization.   Impact: System performance can degrade until the TMM process is either forced to restart or is manually restarted. This vulnerability allows a remote, unauthenticated attacker to cause a degradation of service that can lead to a denial-of-service (DoS) on the BIG-IP system. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

ws before 8.21.1 contains a memory exhaustion vulnerability in lib/receiver.js where the fragment guard only triggers when fragment count reaches maxFragments, allowing attackers to exhaust memory by sending incomplete fragmented WebSocket messages. Attackers can send a text frame with FIN=0 followed by continuation frames without completing the sequence, causing each fragment to be stored as a separate Buffer object with significant overhead, enabling denial of service through heap exhaustion.

Allocation of Resources Without Limits or Throttling vulnerability in phoenixframework phoenix (Phoenix.Socket module) allows an unauthenticated attacker to cause a denial of service against any endpoint that mounts a Phoenix socket with a reachable channel transport (WebSocket or LongPoll). This vulnerability is associated with program files lib/phoenix/socket.ex and program routine 'Elixir.Phoenix.Socket':handle_in/4. Phoenix transports do not limit the number of channels that a single transport process may join. Every phx_join message a client sends over one connection starts a persistent channel process, and the socket process accepts an unbounded number of them. A single unauthenticated client can therefore open one WebSocket or LongPoll connection and stream a large number of phx_join messages, spawning hundreds of thousands of channel processes over that one connection and eventually reaching the BEAM maximum process limit. Once the process table is exhausted the virtual machine can no longer start new processes, denying service to legitimate traffic across the whole node. Because the amplification happens inside a single connection, network-layer connection caps and rate limiting do not mitigate it. The fix adds a :max_channels_per_transport option (default 100) that bounds the number of channels a single transport process can join, forcing abusive clients to open many connections instead, where external load balancers and reverse proxies can throttle them. This issue affects phoenix: from 0.11.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9.

Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint (Mint.HTTP1 module) allows a denial of service via an oversized chunked transfer-encoded response. This vulnerability is associated with program files lib/mint/http1.ex and program routines 'Elixir.Mint.HTTP1':decode_body/5, 'Elixir.Mint.HTTP1':add_body_to_buffer/2. When Mint decodes a chunked HTTP response body, it accumulates each partial fragment of the current chunk in the connection's data_buffer (an unbounded iolist) via add_body_to_buffer/2 and does not emit the data to the caller until the full declared chunk length has been received. The chunk size is taken directly from the server and parsed with no upper bound, so a malicious or compromised server can announce one enormous chunk (for example a size line of 7FFFFFFF, about 2 GiB) and then send the body bytes slowly without ever completing the chunk. The client buffers every received byte while it waits for a completion that never arrives, and because no data responses are produced until the chunk finishes, a caller that otherwise streams large content-length bodies safely gains no protection. An unauthenticated remote server (reachable whenever a client follows redirects, fetches user-supplied URLs, or processes webhooks) can drive the client's memory arbitrarily high and trigger an out-of-memory condition. This issue affects mint: from 0.5.0 before 1.9.1.

Grav is a file-based Web platform. Prior to 1.7.53 and 2.0.0-rc.8, Grav allows an unauthenticated visitor to exhaust server memory and CPU by requesting image derivatives with oversized dimensions through URL query image actions such as forceResize in Grav::fallbackUrl, which passes request parameters to ImageMedium magic actions without a dimension or pixel ceiling. This issue is fixed in versions 1.7.53 and 2.0.0-rc.8.

Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Mistune is vulnerable to a CPU exhaustion DoS due to superlinear (approximately O(n²)) behavior in parse_link_text. When parsing Markdown containing many consecutive [ characters, parse_link_text repeatedly scans the input using a regex search inside a loop. Each iteration re-scans a large portion of the remaining string, resulting in quadratic-time behavior. An attacker-controlled Markdown input can therefore trigger excessive CPU usage with a very small payload. This vulnerability is fixed in 3.3.0.

Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. The URL parser in src/hackney_url.erl converts every unrecognized URL scheme to a permanent BEAM atom via binary_to_atom/2. BEAM atoms are never garbage-collected and the atom table defaults to a hard limit of 1,048,576 entries. An attacker who can supply URLs with attacker-chosen scheme prefixes — directly as request targets, as configured webhook URLs, or via Location headers followed during redirects — can exhaust the atom table and crash the entire BEAM VM with system_limit. This issue affects hackney: from 2.0.0 before 4.0.1.

n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the MCP OAuth client registration endpoint accepted unauthenticated requests and stored client data without adequate resource controls. An unauthenticated remote attacker could exhaust server memory resources by sending large registration payloads, rendering the n8n instance unavailable. The MCP enable/disable toggle gates MCP access but did not restrict client registrations, meaning the endpoint is reachable regardless of whether MCP access is enabled on the instance. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1.

XWiki is an open-source wiki software platform. Versions 16.10.10 and below, 17.0.0-rc-1 through 17.4.3 and 17.5.0-rc-1 through 17.6.0 contain a REST API which doesn't enforce any limits for the number of items that can be requested in a single request at the moment. Depending on the number of pages in the wiki and the memory configuration, this can lead to slowness and unavailability of the wiki. As an example, the /rest/wikis/xwiki/spaces resource returns all spaces on the wiki by default, which are basically all pages. This issue is fixed in versions 17.4.4 and 16.10.11.

EasyFlow GP developed by Digiwin has a Denial of service vulnerability, allowing unauthenticated remote attackers to send specific requests that result in denial of web service.

ZEBRA is a Zcash node written entirely in Rust. Prior to version 4.4.0, a composite denial-of-service vulnerability in Zebra's block discovery pipeline allows an unauthenticated remote attacker to permanently halt all new block discovery on a targeted node. The attack exploits three independent weaknesses in the gossip, syncer, and download subsystems — all exercisable from a single TCP connection — to create a monotonically growing block deficit that never self-heals. This issue has been patched in version 4.4.0.