Routinator exits on any error when accepting incoming HTTP or RTR connections, including ones it can recover from such as running out of file descriptors. This condition can be triggered maliciously by an attacker by opening a large number of connections to the HTTP or RTR server. This only affects users that make their HTTP or RTR server available to untrusted networks.

Unbound before 1.9.4 accesses uninitialized memory, which allows remote attackers to trigger a crash via a crafted NOTIFY query. The source IP address of the query must match an access-control rule.

NLnet Labs Routinator prior to 0.10.2 happily processes a chain of RRDP repositories of infinite length causing it to never finish a validation run. In RPKI, a CA can choose the RRDP repository it wishes to publish its data in. By continuously generating a new child CA that only consists of another CA using a different RRDP repository, a malicious CA can create a chain of CAs of de-facto infinite length. Routinator prior to version 0.10.2 did not contain a limit on the length of such a chain and will therefore continue to process this chain forever. As a result, the validation run will never finish, leading to Routinator continuing to serve the old data set or, if in the initial validation run directly after starting, never serve any data at all.

NLnet Labs Unbound up to and including version 1.25.0 has a denial of service vulnerability in the DNSSEC validator that can lead to a crash given malicious upstream replies. When Unbound constructs chase-reply messages for validation, the code uses the wrong counter to calculate write offsets for ADDITIONAL section rrsets. DNAME duplication could increase the ANSWER section count and authority filtering could decrease the AUTHORITY section count and create an uninitialized array slot. Combining these two, the validator later dereferences this uninitialized pointer, causing an immediate process crash. An adversary controlling a DNSSEC-signed domain can trigger this bug with a single query by configuring a DNAME chain with unsigned CNAMEs and a response containing unsigned AUTHORITY records alongside signed ADDITIONAL glue records. Unbound 1.25.1 contains a patch with a fix to use the proper counters to calculate the write offsets.

NLnet Labs Unbound 1.14.0 up to and including version 1.25.0 has a vulnerability that results in heap overflow when encoding multiple NSID and/or DNS Cookie EDNS and/or EDNS Padding options in the reply packet. The relevant options ('nsid', 'answer-cookie', 'pad-responses' (default)) need to be enabled for the vulnerability to be exploited. An adversary who can query Unbound can exploit the vulnerability by attaching multiple NSID and/or DNS Cookie EDNS and/or EDNS Padding options to the query. A flaw in the size calculation of the EDNS field truncates the correct value which allows the encoder to overflow the available space when writing. Those two combined lead to a heap overflow write of Unbound controlled data and eventually a crash. Unbound 1.25.1 contains a patch with a fix to de-duplicate the EDNS options and a fix to prevent truncation of the EDNS field size calculation.

NLnet Labs Krill supports direct access to the RRDP repository content through its built-in web server at the "/rrdp" endpoint. Prior to 0.12.1 a direct query for any existing directory under "/rrdp/", rather than an RRDP file such as "/rrdp/notification.xml" as would be expected, causes Krill to crash. If the built-in "/rrdp" endpoint is exposed directly to the internet, then malicious remote parties can cause the publication server to crash. The repository content is not affected by this, but the availability of the server and repository can cause issues if this attack is persistent and is not mitigated.

NLnet Labs' Routinator up to and including version 0.12.1 may crash when trying to parse certain malformed RPKI objects. This is due to insufficient input checking in the bcder library covered by CVE-2023-39914.

In NLnet Labs Routinator 0.9.0 up to and including 0.11.2, due to a mistake in error handling, data in RRDP snapshot and delta files that isn’t correctly base 64 encoded is treated as a fatal error and causes Routinator to exit. Worst case impact of this vulnerability is denial of service for the RPKI data that Routinator provides to routers. This may stop your network from validating route origins based on RPKI data. This vulnerability does not allow an attacker to manipulate RPKI data.

When sending a specifically crafted non-UTF-8 string as select-asn query parameter to the /api/v1/origins endpoint, Routinator crashes. This only affects users who allow API access from untrusted networks.

NLnet Labs Unbound up to and including version 1.25.0 is vulnerable to a degradation of service attack related to parsing long lists of incoming EDNS options. An adversary sending queries with too many EDNS options can hold Unbound threads hostage while they are parsing and creating internal data structures for the options. Coordinated attacks can result in degradation and/or denial of service. Unbound 1.25.1 contains a patch with a fix to limit acceptable incoming EDNS options (100).

Due to a mistake in error checking, Routinator will terminate when an incoming RTR connection is reset by the peer too quickly after opening.

NLnet Labs Unbound version 1.18.0 up to and including version 1.19.1 contain a vulnerability that can cause denial of service by a certain code path that can lead to an infinite loop. Unbound 1.18.0 introduced a feature that removes EDE records from responses with size higher than the client's advertised buffer size. Before removing all the EDE records however, it would try to see if trimming the extra text fields on those records would result in an acceptable size while still retaining the EDE codes. Due to an unchecked condition, the code that trims the text of the EDE records could loop indefinitely. This happens when Unbound would reply with attached EDE information on a positive reply and the client's buffer size is smaller than the needed space to include EDE records. The vulnerability can only be triggered when the 'ede: yes' option is used; non default configuration. From version 1.19.2 on, the code is fixed to avoid looping indefinitely.

The initial code parsing the manifest did not check the content of the file names yet later code assumed that it was checked and panicked when encountering illegal characters, resulting in a crash of Routinator.

Unbound before 1.10.1 has Insufficient Control of Network Message Volume, aka an "NXNSAttack" issue. This is triggered by random subdomains in the NSDNAME in NS records.

Unbound before 1.10.1 has an infinite loop via malformed DNS answers received from upstream servers.

An incomplete fix for CVE-2020-12662 was shipped for Unbound in Red Hat Enterprise Linux 7, as part of erratum RHSA-2020:2414. Vulnerable versions of Unbound could still amplify an incoming query into a large number of queries directed to a target, even with a lower amplification ratio compared to versions of Unbound that shipped before the mentioned erratum. This issue is about the incomplete fix for CVE-2020-12662, and it does not affect upstream versions of Unbound.

Unbound before 1.9.5 allows an infinite loop via a compressed name in dname_pkt_copy. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited

Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the "KeyTrap" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.

NLnet Labs' bcder library up to and including version 0.7.2 panics while decoding certain invalid input data rather than rejecting the data with an error. This can affect both the actual decoding stage as well as accessing content of types that utilized delayed decoding.

A vulnerability named 'Non-Responsive Delegation Attack' (NRDelegation Attack) has been discovered in various DNS resolving software. The NRDelegation Attack works by having a malicious delegation with a considerable number of non responsive nameservers. The attack starts by querying a resolver for a record that relies on those unresponsive nameservers. The attack can cause a resolver to spend a lot of time/resources resolving records under a malicious delegation point where a considerable number of unresponsive NS records reside. It can trigger high CPU usage in some resolver implementations that continually look in the cache for resolved NS records in that delegation. This can lead to degraded performance and eventually denial of service in orchestrated attacks. Unbound does not suffer from high CPU usage, but resources are still needed for resolving the malicious delegation. Unbound will keep trying to resolve the record until hard limits are reached. Based on the nature of the attack and the replies, different limits could be reached. From version 1.16.3 on, Unbound introduces fixes for better performance when under load, by cutting opportunistic queries for nameserver discovery and DNSKEY prefetching and limiting the number of times a delegation point can issue a cache lookup for missing records.

NLnet Labs Routinator versions 0.9.0 up to and including 0.10.1, support the gzip transfer encoding when querying RRDP repositories. This encoding can be used by an RRDP repository to cause an out-of-memory crash in these versions of Routinator. RRDP uses XML which allows arbitrary amounts of white space in the encoded data. The gzip scheme compresses such white space extremely well, leading to very small compressed files that become huge when being decompressed for further processing, big enough that Routinator runs out of memory when parsing input data waiting for the next XML element.

Unbound before 1.9.5 allows an assertion failure via a compressed name in dname_pkt_copy. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited

Unbound before 1.9.5 allows an assertion failure and denial of service in dname_pkt_copy via an invalid packet. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited

Unbound before 1.9.5 allows an assertion failure and denial of service in synth_cname. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited

In NLnet Labs Routinator prior to 0.10.2, a validation run can be delayed significantly by an RRDP repository by not answering but slowly drip-feeding bytes to keep the connection alive. This can be used to effectively stall validation. While Routinator has a configurable time-out value for RRDP connections, this time-out was only applied to individual read or write operations rather than the complete request. Thus, if an RRDP repository sends a little bit of data before that time-out expired, it can continuously extend the time it takes for the request to finish. Since validation will only continue once the update of an RRDP repository has concluded, this delay will cause validation to stall, leading to Routinator continuing to serve the old data set or, if in the initial validation run directly after starting, never serve any data at all.

In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.

In Apache Subversion versions up to and including 1.9.10, 1.10.4, 1.12.0, Subversion's svnserve server process may exit when a client sends certain sequences of protocol commands. This can lead to disruption for users of the server.

React Router is a router for React. Starting in version 7.2.0 and prior to version 7.5.2, it is possible to force an application to switch to SPA mode by adding a header to the request. If the application uses SSR and is forced to switch to SPA, this causes an error that completely corrupts the page. If a cache system is in place, this allows the response containing the error to be cached, resulting in a cache poisoning that strongly impacts the availability of the application. This issue has been patched in version 7.5.2.

An assertion failure discovered in in check_certificate_request() in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers to cause a denial of service.

The flowd process, responsible for forwarding traffic in SRX Series services gateways, may crash and restart when processing specific transit IP packets through an IPSec tunnel. Continued processing of these packets may result in an extended Denial of Service (DoS) condition. This issue only occurs when IPSec tunnels are configured. Systems without IPSec tunnel configurations are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D171, 15.1X49-D180 on SRX Series; 18.2 versions 18.2R2-S1 and later, prior to 18.2R3 on SRX Series; 18.4 versions prior to 18.4R2 on SRX Series.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum and Modicon Premium which could cause a possible Denial of Service due to improper data integrity check when sending files the controller over Modbus.

Improper Handling of Exceptional Conditions, Improper Check for Unusual or Exceptional Conditions vulnerability in the ABB SPIET800 and PNI800 module that allows an attacker to cause the denial of service or make the module unresponsive.

An issue was discovered on Samsung mobile devices with N(7.x) software. An attacker can cause a reboot because InputMethodManagerService has an unprotected system service. The Samsung ID is SVE-2017-9995 (January 2018).

There is a Uncaught Exception vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may lead to remote Denial of Service.

An Improper Handling of Exceptional Conditions vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an attacker to inject a specific BGP update, causing the routing protocol daemon (RPD) to crash and restart, leading to a Denial of Service (DoS). Continued receipt and processing of the BGP update will create a sustained Denial of Service (DoS) condition. This issue affects very specific versions of Juniper Networks Junos OS: 19.3R3-S2; 19.4R3-S3; 20.2 versions 20.2R2-S3 and later, prior to 20.2R3-S2; 20.3 versions 20.3R2 and later, prior to 20.3R3; 20.4 versions 20.4R2 and later, prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS 20.1 is not affected by this issue. This issue also affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-S3-EVO, 20.4R3-EVO; 21.1-EVO versions prior to 21.1R2-EVO; 21.2-EVO versions prior to 21.2R2-EVO.

A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.

There is a denial of service vulnerability in some ZTE mobile internet products. Due to insufficient validation of Web interface parameter, an attacker could use the vulnerability to perform a denial of service attack.

On the affected platforms running EOS, a malformed DHCP packet might cause the DHCP relay agent to restart.

In CODESYS V2 Runtime Toolkit 32 Bit full and PLCWinNT prior to versions V2.4.7.56 unauthenticated crafted invalid requests may result in several denial-of-service conditions. Running PLC programs may be stopped, memory may be leaked, or further communication clients may be blocked from accessing the PLC.

All versions of the CODESYS V3 Runtime Toolkit for VxWorks from version V3.5.8.0 and before version V3.5.17.10 have Improper Handling of Exceptional Conditions.

A vulnerability in class-of-service (CoS) queue management in Juniper Networks Junos OS on the ACX2K Series devices allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). Specific packets are being incorrectly routed to a queue used for other high-priority traffic such as BGP, PIM, ICMP, ICMPV6 ND and ISAKMP. Due to this misclassification of traffic, receipt of a high rate of these specific packets will cause delays in the processing of other traffic, leading to a Denial of Service (DoS). Continued receipt of this amount of traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on ACX2K Series: All versions prior to 19.4R3-S9; All 20.2 versions; 20.3 versions prior to 20.3R3-S6 on ACX2K Series; 20.4 versions prior to 20.4R3-S4 on ACX2K Series; All 21.1 versions; 21.2 versions prior to 21.2R3-S3 on ACX2K Series. Note: This issues affects legacy ACX2K Series PPC-based devices. This platform reached Last Supported Version (LSV) as of the Junos OS 21.2 Release.

Improper Handling of Exceptional Conditions vulnerability in the WatchGuard Single Sign-On Client on Windows causes the client to crash while handling malformed commands. An attacker with network access to the client could create a denial of service condition for the Single Sign-On service by repeatedly issuing malformed commands. This issue affects Single Sign-On Client: through 12.7.

In wlan firmware, there is possible system crash due to an uncaught exception. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07664720; Issue ID: ALPS07664720.

Improper handling of exceptional conditions in SuiteLink server while processing command 0x01

The Apollo Router is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Affected versions are subject to a Denial-of-Service (DoS) type vulnerability which causes the Router to panic and terminate when GraphQL Subscriptions are enabled. It can be triggered when **all of the following conditions are met**: 1. Running Apollo Router v1.28.0, v1.28.1 or v1.29.0 ("impacted versions"); **and** 2. The Supergraph schema provided to the Router (either via Apollo Uplink or explicitly via other configuration) **has a `subscription` type** with root-fields defined; **and** 3. The YAML configuration provided to the Router **has subscriptions enabled** (they are _disabled_ by default), either by setting `enabled: true` _or_ by setting a valid `mode` within the `subscriptions` object (as seen in [subscriptions' documentation](https://www.apollographql.com/docs/router/executing-operations/subscription-support/#router-setup)); **and** 4. An [anonymous](https://spec.graphql.org/draft/#sec-Anonymous-Operation-Definitions) (i.e., un-named) `subscription` operation (e.g., `subscription { ... }`) is received by the Router If **all four** of these criteria are met, the impacted versions will panic and terminate. There is no data-privacy risk or sensitive-information exposure aspect to this vulnerability. This is fixed in Apollo Router v1.29.1. Users are advised to upgrade. Updating to v1.29.1 should be a clear and simple upgrade path for those running impacted versions. However, if Subscriptions are **not** necessary for your Graph – but are enabled via configuration — then disabling subscriptions is another option to mitigate the risk.

An improper handling of exceptional conditions vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to send specifically crafted traffic to a GlobalProtect interface that causes the service to stop responding. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.21; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h4; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h3; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8-h4; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers are not impacted by this issue.

Meshtastic device firmware is a firmware for meshtastic devices to run an open source, off-grid, decentralized, mesh network built to run on affordable, low-power devices. Meshtastic device firmware is subject to a denial of serivce vulnerability in MQTT handling, fixed in version 2.4.1 of the Meshtastic firmware and on the Meshtastic public MQTT Broker. It's strongly suggested that all users of Meshtastic, particularly those that connect to a privately hosted MQTT server, update to this or a more recent stable version right away. There are no known workarounds for this vulnerability.

http-swagger is an open source wrapper to automatically generate RESTful API documentation with Swagger 2.0. In versions of http-swagger prior to 1.2.6 an attacker may perform a denial of service attack consisting of memory exhaustion on the host system. The cause of the memory exhaustion is down to improper handling of http methods. Users are advised to upgrade. Users unable to upgrade may to restrict the path prefix to the "GET" method as a workaround.

go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using the modifier methods did not account for certain states that would place the `ProtoNode` into an unencodeable form. Due to conformance with the [`github.com/ipfs/go-block-format#Block`](https://pkg.go.dev/github.com/ipfs/go-block-format#Block) and [`github.com/ipfs/go-ipld-format#Node`](https://pkg.go.dev/github.com/ipfs/go-ipld-format#Node) interfaces, certain methods, which internally require a re-encode if state has changed, will panic due to the inability to return an error. This issue has been addressed across a number of pull requests. Users are advised to upgrade to version 0.8.1 for a complete set of fixes. Users unable to upgrade may attempt to mitigate this issue by sanitising inputs when allowing user-input to set a new `CidBuilder` on a `ProtoNode` and by sanitising `Tsize` (`Link#Size`) values such that they are a reasonable byte-size for sub-DAGs where derived from user-input.

Yet Another UserAgent Analyzer (Yauaa) is a java library that tries to parse and analyze the useragent string and extract as many relevant attributes as possible. Applications using the Client Hints analysis feature introduced with 7.0.0 can crash because the Yauaa library throws an ArrayIndexOutOfBoundsException. If uncaught the exception will result in a program crash. Applications that do not use this feature are not affected. Users are advised to upgrade to version 7.9.0. Users unable to upgrade may catch and discard any ArrayIndexOutOfBoundsException thrown by the Yauaa library.