Use of MAC address as an authenticated password in QSAN Storage Manager, XEVO, SANOS allows local attackers to escalate privileges. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

Trango ApexLynx 2.0, ApexOrion 2.0, GigaLynx 2.0, GigaOrion 2.0, and StrataLink 3.0 devices have a built-in, hidden root account, with a default password for which the MD5 hash value is public (but the cleartext value is perhaps not yet public). This account is accessible via SSH and/or TELNET, and grants access to the underlying embedded UNIX OS on the device, allowing full control over it.

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, an attacker may gain access to the system without proper authentication.

An authentication bypass was found in an unknown area of the SiteOmat source code. All SiteOmat BOS versions are affected, prior to the submission of this exploit. Also, the SiteOmat does not force administrators to switch passwords, leaving SSH and HTTP remote authentication open to public.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, these devices use a hard-coded service code for access to the console.

A vulnerability in Cisco IOS XE Software could allow an unauthenticated, remote attacker to log in to a device running an affected release of Cisco IOS XE Software with the default username and password that are used at initial boot, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with privilege level 15 that has a default username and password. An attacker could exploit this vulnerability by using this account to remotely connect to an affected device. A successful exploit could allow the attacker to log in to the device with privilege level 15 access. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software Release 16.x. This vulnerability does not affect Cisco IOS XE Software releases prior to Release 16.x. Cisco Bug IDs: CSCve89880.

A CWE-798: Use of Hard-coded Credentials vulnerability exists in the Unity Loader and OS Loader Software (all versions). The fixed credentials are used to simplify file transfer. Today the use of fixed credentials is considered a vulnerability, which could cause unauthorized access to the file transfer service provided by the Modicon PLCs. This could result in various unintended results.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices have a hardcoded password of wrgac25_dlink.2013gui_dir850l for the Alphanetworks account upon device reset, which allows remote attackers to obtain root access via a TELNET session.

An issue was discovered on FiberHome HG6245D devices through RP2613. The web daemon contains the hardcoded admin / G0R2U1P2ag credentials for an ISP.

Natus NeuroWorks and SleepWorks before 8.4 GMA3 utilize a default password of xltek for the Microsoft SQL Server service sa account, allowing a threat actor to perform remote code execution, data exfiltration, or other nefarious actions such as tampering with data or destroying/disrupting MSSQL services.

The DMP-5000 devices are shipped with a default administrative web account with weak authentication controls, which are not required to be changed during initial configuration or operation. Using these accounts provides full system access.

An issue was discovered in Shinobi through ocean version 1. lib/auth.js has Incorrect Access Control. Valid API Keys are held in an internal JS Object. Therefore an attacker can use JS Proto Method names (such as constructor or hasOwnProperty) to convince the System that the supplied API Key exists in the underlying JS object, and consequently achieve complete access to User/Admin/Super API functions, as demonstrated by a /super/constructor/accounts/list URI.

International Datacasting Corporation (IDC) SFX Series SuperFlex(SFX2100) SatelliteReceiver contains hardcoded and insecure credentials for the `admin` account. A remote unauthenticated attacker can use these undocumented credentials to access the satellite system directly via the Telnet service, leading to potential system compromise.

International Datacasting Corporation (IDC) SFX2100 Satellite Receiver, trivial password for the `user` (usr) account. A remote unauthenticated attacker can exploit this to gain unauthorized SSH access to the system, while intially dropped into a restricted shell, an attacker can trivially spawn a complete pty to gain an appropriately interactive shell.

A Use of Hard-coded Credentials vulnerability in Trane Tracer SC, Tracer SC+, and Tracer Concierge could allow an attacker to disclose sensitive information and take over accounts.

Dell EMC Networking S4100 and S5200 Series Switches manufactured prior to February 2020 contain a hardcoded credential vulnerability. A remote unauthenticated malicious user could exploit this vulnerability and gain administrative privileges.

International Datacasting Corporation (IDC) SFX Series SuperFlex Satellite Receiver contains undocumented, hardcoded/insecure credentials for the `xd` user account. A remote unauthenticated attacker can log in via FTP using these credentials. Because the `xd` user has write permissions to their home directory where root-executed binaries and symlinks (such as those invoked by `xdstartstop`) are stored, the attacker can overwrite these files or manipulate symlinks to achieve arbitrary code execution as the root user.

International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver contains hardcoded credentials for the `monitor` account. A remote unauthenticated attacker can use these trivial, undocumented credentials to access the system via SSH. While initially dropped into a restricted shell, the attacker can trivially break out to achieve standard shell functionality.

SAP Commerce, versions - 6.7, 1808, 1811, 1905, and SAP Commerce (Data Hub), versions - 6.7, 1808, 1811, 1905, allows an attacker to bypass the authentication and/or authorization that has been configured by the system administrator due to the use of Hardcoded Credentials.

The database account and password are hardcoded, allowing login with the account to manipulate the database in MagicInfo9 Server.This issue affects MagicINFO 9 Server: less than 21.1090.1.

GeoVision Door Access Control device family is hardcoded with a root password, which adopting an identical password in all devices.

IBM Security Guardium 11.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174732.

Taiko AG1000-01A SMS Alert Gateway Rev 7.3 and Rev 8 contains a hard-coded credential vulnerability in the embedded web configuration interface where authentication is implemented entirely in client-side JavaScript in login.zhtml, exposing static plaintext credentials in the page source. Unauthenticated attackers with network access can recover administrative credentials directly from the client-side validate() function to obtain full administrative access to the device.

Use of hard-coded cryptographic keys in Canon EOS Network Setting Tool Version 1.5.0 or earlier

In ScadaBR version 1.2.0, a Use of Hard-Coded Credentials vulnerability could allow an attacker to access the SCADA system as admin.

Jinan USR IOT Technology Limited (PUSR) USR-W610 RS232/485 to Wi-Fi/Ethernet Converter device firmware contains plaintext administrative credentials embedded in the firmware image. These credentials can be extracted through firmware analysis and used to authenticate to device services.

A security flaw has been discovered in Apeman ID71 218.53.203.117. This vulnerability affects unknown code of the file /system/www/system.ini. The manipulation results in hard-coded credentials. The attack may be performed from remote. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 11.3 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 186697.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174975.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 175066.

The Felan Framework plugin for WordPress is vulnerable to improper authentication in versions up to, and including, 1.1.4. This is due to the hardcoded password in the 'fb_ajax_login_or_register' function and in the 'google_ajax_login_or_register' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, if they registered with facebook or google social login and did not change their password. CVE-2025-23504 is likely a duplicate of this issue.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 179266.

IBM Spectrum Protect Plus 10.1.0 thorugh 10.1.6 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 190454.

Yarbo firmware v2.3.9 contains hardcoded administrative credentials embedded in the firmware image. These credentials are identical across all devices running this firmware and cannot be changed or removed by end users, enabling trivial unauthorized access to device management interfaces by anyone who knows them.

IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 contains a default password for an IDRM administrative account. A remote attacker could exploit this vulnerability to login and execute arbitrary code on the system with root privileges. IBM X-Force ID: 180534.

IBM SiteProtector Appliance 3.1.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174142.

Dairy Farm Shop Management System v1.0 was discovered to contain hardcoded credentials in the source code which allows attackers access to the control panel if compromised.

netbox-docker before 2.5.0 has a superuser account with default credentials (admin password for the admin account, and 0123456789abcdef0123456789abcdef01234567 value for SUPERUSER_API_TOKEN). In practice on the public Internet, almost all users changed the password but only about 90% changed the token. Having a default token value was intentional and was valuable for the main intended use case of the netbox-docker product (isolated development networks). Some users engaged in an effort to repurpose netbox-docker for production. The documentation for this effort stated that the defaults must not be used. However, installation did not ensure non-default values. The Supplier was aware of the CVE ID assignment and did not object to the assignment.

A security issue was discovered in the Kubernetes Image Builder versions <= v0.1.37 where default credentials are enabled during the image build process. Virtual machine images built using the Proxmox provider do not disable these default credentials, and nodes using the resulting images may be accessible via these default credentials. The credentials can be used to gain root access. Kubernetes clusters are only affected if their nodes use VM images created via the Image Builder project with its Proxmox provider.

IBM Security Identity Manager 7.0.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 171511.

The Four-Faith F3x36 router using firmware v2.0.0 is vulnerable to authentication bypass due to hard-coded credentials in the administrative web server. An attacker with knowledge of the credentials can gain administrative access via crafted HTTP requests. This issue appears similar to CVE-2023-32645.

An exploitable Use of Hard-coded Credentials vulnerability exists in the Moxa AWK-3131A Wireless Access Point running firmware 1.1. The device operating system contains an undocumented, privileged (root) account with hard-coded credentials, giving attackers full control of affected devices.

A vulnerability classified as critical has been found in TOTOLINK T10 AC1200 4.1.8cu.5207. Affected is an unknown function of the file /squashfs-root/web_cste/cgi-bin/product.ini of the component Telnet Service. The manipulation leads to hard-coded credentials. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Dragonfly is an open source P2P-based file distribution and image acceleration system. It is hosted by the Cloud Native Computing Foundation (CNCF) as an Incubating Level Project. Dragonfly uses JWT to verify user. However, the secret key for JWT, "Secret Key", is hard coded, which leads to authentication bypass. An attacker can perform any action as a user with admin privileges. This issue has been addressed in release version 2.0.9. All users are advised to upgrade. There are no known workarounds for this vulnerability.

Certain switch models from PLANET Technology have a Hard-coded community string in the SNMPv1 service, allowing unauthorized remote attackers to use this community string to access the SNMPv1 service with read-write privileges.

Crawl4AI before 0.8.7 contains an authentication bypass vulnerability due to a hardcoded default JWT signing key in the Docker API server. Attackers who know the default key can forge valid authentication tokens for any user, bypassing authentication and gaining full access to protected functionality.

Covenant 0.1.3 - 0.5 contains a remote code execution vulnerability that allows attackers to craft malicious JWT tokens with administrative privileges. Attackers can generate forged tokens with admin roles and upload custom DLL payloads to execute arbitrary commands on the target system.

In TinyCheck before commits 9fd360d and ea53de8, the installation script of the tool contained hard-coded credentials to the backend part of the tool. This information could be used by an attacker for unauthorized access to remote data.

A vulnerability classified as critical has been found in Go-Tribe gotribe up to cd3ccd32cd77852c9ea73f986eaf8c301cfb6310. Affected is the function Sign of the file pkg/token/token.go. The manipulation of the argument config.key leads to hard-coded credentials. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The patch is identified as 4fb9b9e80a2beedd09d9fde4b9cf5bd510baf18f. It is recommended to apply a patch to fix this issue.