A heap-based buffer overflow vulnerability [CWE-122] in FortiOS version 7.2.4 and below, version 7.0.11 and below, version 6.4.12 and below, version 6.0.16 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below, version 1.2 all versions, version 1.1 all versions SSL-VPN may allow a remote attacker to execute arbitrary code or commands via specifically crafted requests.

Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer.

FastNetMon Community Edition through 1.2.9 contains an integer overflow in the BGP AS_PATH attribute encoder. In src/bgp_protocol.hpp, the IPv4UnicastAnnounce::get_attributes() function computes attribute_length as 'sizeof(bgp_as_path_segment_element_t) + this->as_path_asns.size() * sizeof(uint32_t)' and stores it in a uint8_t field (line 600-605). Since uint8_t can only hold values 0-255, an AS_PATH containing more than 63 ASNs (2 + 64*4 = 258 > 255) causes silent truncation. The truncated length is used for buffer sizing, while the actual data written is the full untruncated amount, resulting in a heap buffer overflow. Similarly, the path_segment_length field at line 621 is also uint8_t, truncating with more than 255 ASNs.

Heap buffer overflow in DTLS 1.3 ACK message processing. A remote attacker can send a crafted DTLS 1.3 ACK message that triggers a heap buffer overflow.

Calling the scanf family of functions with a %mc (malloc'd character match) in the GNU C Library version 2.7 to version 2.43 with a format width specifier with an explicit width greater than 1024 could result in a one byte heap buffer overflow.

A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i800NC, RUGGEDCOM i801, RUGGEDCOM i801NC, RUGGEDCOM i802, RUGGEDCOM i802NC, RUGGEDCOM i803, RUGGEDCOM i803NC, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2100NC, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M2200NC, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM M969NC, RUGGEDCOM RMC30, RUGGEDCOM RMC30NC, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RMC8388NC V4.X, RUGGEDCOM RMC8388NC V5.X, RUGGEDCOM RP110, RUGGEDCOM RP110NC, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600FNC, RUGGEDCOM RS1600NC, RUGGEDCOM RS1600T, RUGGEDCOM RS1600TNC, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS400NC, RUGGEDCOM RS401, RUGGEDCOM RS401NC, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416NC, RUGGEDCOM RS416NCv2 V4.X, RUGGEDCOM RS416NCv2 V5.X, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416PNC, RUGGEDCOM RS416PNCv2 V4.X, RUGGEDCOM RS416PNCv2 V5.X, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000ANC, RUGGEDCOM RS8000H, RUGGEDCOM RS8000HNC, RUGGEDCOM RS8000NC, RUGGEDCOM RS8000T, RUGGEDCOM RS8000TNC, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GNC, RUGGEDCOM RS900GNC(32M) V4.X, RUGGEDCOM RS900GNC(32M) V5.X, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900GPNC, RUGGEDCOM RS900L, RUGGEDCOM RS900LNC, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900MNC-GETS-C01, RUGGEDCOM RS900MNC-GETS-XX, RUGGEDCOM RS900MNC-STND-XX, RUGGEDCOM RS900MNC-STND-XX-C01, RUGGEDCOM RS900NC, RUGGEDCOM RS900NC(32M) V4.X, RUGGEDCOM RS900NC(32M) V5.X, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910LNC, RUGGEDCOM RS910NC, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920LNC, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930LNC, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS940GNC, RUGGEDCOM RS969, RUGGEDCOM RS969NC, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100NC, RUGGEDCOM RSG2100NC(32M) V4.X, RUGGEDCOM RSG2100NC(32M) V5.X, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2100PNC, RUGGEDCOM RSG2100PNC (32M) V4.X, RUGGEDCOM RSG2100PNC (32M) V5.X, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2200NC, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2288NC V4.X, RUGGEDCOM RSG2288NC V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300NC V4.X, RUGGEDCOM RSG2300NC V5.X, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2300PNC V4.X, RUGGEDCOM RSG2300PNC V5.X, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG2488NC V4.X, RUGGEDCOM RSG2488NC V5.X, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSG920PNC V4.X, RUGGEDCOM RSG920PNC V5.X, RUGGEDCOM RSL910, RUGGEDCOM RSL910NC, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. Within a third-party component, whenever memory allocation is requested, the out of bound size is not checked. Therefore, if size exceeding the expected allocation is assigned, it could allocate a smaller buffer instead. If an attacker were to exploit this, they could cause a heap overflow.

A vulnerability has been found in Cesanta Mongoose up to 7.20. This affects the function mg_tls_recv_cert of the file mongoose.c of the component TLS 1.3 Handler. Such manipulation of the argument pubkey leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.21 mitigates this issue. The name of the patch is 0d882f1b43ff2308b7486a56a9d60cd6dba8a3f1. It is advisable to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

Buffer overflow in CPCA Resource Download process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

Buffer overflow in NetBIOS QNAME registering and communication process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

TensorFlow is an open source platform for machine learning. Prior to versions 2.12.0 and 2.11.1, there is a heap buffer overflow in TAvgPoolGrad. A fix is included in TensorFlow 2.12.0 and 2.11.1.

Heap-based buffer overflow vulnerability in Samsung Open Source Escargot allows Overflow Buffers. This issue affects Escargot: 590345cc6258317c5da850d846ce6baaf2afc2d3.

Windows Pragmatic General Multicast (PGM) Remote Code Execution Vulnerability

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, disable support for fragmented IP datagrams or apply the patches manually.

xbuf_format_converter, used as part of exif_read_data, was appending a terminating null character to the generated string, but was not using its standard append char function. As a result, if the buffer was full, it would result in an out-of-bounds write. This issue affects HHVM versions prior to 4.56.3, all versions between 4.57.0 and 4.80.1, all versions between 4.81.0 and 4.93.1, and versions 4.94.0, 4.95.0, 4.96.0, 4.97.0, 4.98.0.

All versions of GurumDDS are vulnerable to heap-based buffer overflow, which may cause a denial-of-service condition or remotely execute arbitrary code.

All versions of GurumDDS improperly calculate the size to be used when allocating the buffer, which may result in a buffer overflow.

RTI Connext DDS Professional and Connext DDS Secure Versions 4.2x to 6.1.0 not correctly calculate the size when allocating the buffer, which may result in a buffer overflow.

Internet Control Message Protocol (ICMP) Remote Code Execution Vulnerability

k5admind (kadmind) for Heimdal allows remote attackers to execute arbitrary code via a Kerberos 4 compatibility administration request whose framing length is less than 2, which leads to a heap-based buffer overflow.

libmysofa is vulnerable to Heap-based Buffer Overflow

Use After Free (UAF) vulnerability in the Vdecoderservice service. Successful exploitation of this vulnerability may cause the image decoding feature to perform abnormally.

Buffer overflow in Zephyr USB DFU DNLOAD. Zephyr versions >= v2.5.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-c3gr-hgvr-f363

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition.

CODESYS Control Runtime system before 3.5.17.10 has a Heap-based Buffer Overflow.

Heap overflow in FTP daemon in Solaris 8 allows remote attackers to execute arbitrary commands by creating a long pathname and calling the LIST command, which uses glob to generate long strings.

Advantech WebAccess versions 9.02 and prior are vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute code.

Heap-based buffer overflow in the KCAPI ECC code path of wc_ecc_import_x963_ex() in wolfSSL wolfcrypt allows a remote attacker to write attacker-controlled data past the bounds of the pubkey_raw buffer via a crafted oversized EC public key point. The WOLFSSL_KCAPI_ECC code path copies the input to key->pubkey_raw (132 bytes) using XMEMCPY without a bounds check, unlike the ATECC code path which includes a length validation. This can be triggered during TLS key exchange when a malicious peer sends a crafted ECPoint in ServerKeyExchange.

Multiple out-of-bounds write vulnerabilities exist in the ORCA format nAtoms functionality of Open Babel 3.1.1 and master commit 530dbfa3. A specially-crafted malformed file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.The loop that stores the coordinates does not check its index against nAtoms

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-13 and 6.9.13-38, a heap buffer overflow vulnerability in the XBM image decoder (ReadXBMImage) allows an attacker to write controlled data past the allocated heap buffer when processing a maliciously crafted image file. Any operation that reads or identifies an image can trigger the overflow, making it exploitable via common image upload and processing pipelines. Versions 7.1.2-13 and 6.9.13-38 fix the issue.

Heap-based buffer overflow in Microsoft Windows DNS allows an unauthorized attacker to execute code over a network.

memory corruption in modem due to improper check while calculating size of serialized CoAP message

A vulnerability was determined in quickjs-ng quickjs up to 0.11.0. This vulnerability affects the function js_typed_array_constructor of the file quickjs.c. Executing a manipulation can lead to heap-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This patch is called c5d80831e51e48a83eab16ea867be87f091783c5. A patch should be applied to remediate this issue.

A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer.

Multiple out-of-bounds write vulnerabilities exist in the ORCA format nAtoms functionality of Open Babel 3.1.1 and master commit 530dbfa3. A specially-crafted malformed file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.nAtoms calculation wrap-around, leading to a small buffer allocation

OpenImageIO v3.1.0.0dev was discovered to contain a heap overflow via the component OpenImageIO_v3_1_0::farmhash::inlined::Fetch64(char const*).

Heap-based buffer overflow vulnerability in parser_iloc function in libsimba library prior to SMR Apr-2022 Release 1 allows code execution by remote attacker.

Heap-based buffer overflow vulnerability in sheifd_get_info_image function in libsimba library prior to SMR Apr-2022 Release 1 allows code execution by remote attacker.

Heap-based buffer overflow vulnerability in parser_infe function in libsimba library prior to SMR Apr-2022 Release 1 allows code execution by remote attacker.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18289, CVE-2019-18293, and CVE-2019-18295. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

CROSS implementation contains reference and optimized implementations of the CROSS post-quantum signature algorithm. Prior to commit fc6b7e7, there is a buffer overflow in crypto_sign_open() caused by an underflow of the integer mlen. This issue has been patched via commit fc6b7e7.

Heap based buffer overflow in HTTP Server functionality in Micrium uC-HTTP 3.01.01 allows remote code execution via HTTP request.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, and CVE-2019-18329. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.27 to before 0.10.78, Deriver::derive (and PkeyCtxRef::derive) sets len = buf.len() and passes it as the in/out length to EVP_PKEY_derive, relying on OpenSSL to honor it. On OpenSSL 1.1.x, X25519, X448, DH and HKDF-extract ignore the incoming *keylen, unconditionally writing the full shared secret (32/56/prime-size bytes). A caller passing a short slice gets a heap/stack overflow from safe code. OpenSSL 3.x providers do check, so this only impacts older OpenSSL. This vulnerability is fixed in 0.10.78.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.