Tenda AX12 V22.03.01.21_CN was found to have a command injection vulnerability via /goform/setMacFilterCfg function.

A weakness has been identified in Tenda AC6 15.03.06.23. Affected by this vulnerability is the function formWifiApScan of the file /goform/WifiApScan of the component httpd. Executing a manipulation of the argument wl2g.public.country/wl5g.public.country can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in Wavlink NU516U1 240425. The affected element is the function WifiBasic of the file /cgi-bin/wireless.cgi. Performing a manipulation of the argument AuthMethod/EncrypType results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure.

A security flaw has been discovered in Wavlink NU516U1 M16U1_V240425. This vulnerability affects the function wzdap of the file /cgi-bin/adm.cgi. Performing a manipulation of the argument EncrypType/wl_Pass is directly passed by the attacker/so we can control the EncrypType/wl_Pass results in os command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure.

A security vulnerability has been detected in Wavlink NU516U1 240425. Impacted is the function advance of the file /cgi-bin/wireless.cgi. Such manipulation of the argument wlan_conf/Channel/skiplist/ieee_80211h leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure.

A vulnerability was identified in Wavlink NU516U1 M16U1_V240425. This affects the function wifi_region of the file /cgi-bin/adm.cgi. Such manipulation of the argument skiplist1/skiplist2 leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure.

A vulnerability has been found in Wavlink NU516U1 M16U1_V240425. Affected is the function change_wifi_password of the file /cgi-bin/adm.cgi. The manipulation of the argument wl_channel/wl_Pass/EncrypType leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure.

An issue discovered in TenghuTOS TWS-200 firmware version:V4.0-201809201424 allows a remote attacker to execute arbitrary code via crafted command on the ping page component.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

D-Link DIR-846 Firmware FW100A53DBR was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

A flaw was found in pgAdmin. This issue occurs when the pgAdmin server HTTP API validates the path a user selects to external PostgreSQL utilities such as pg_dump and pg_restore. Versions of pgAdmin prior to 7.6 failed to properly control the server code executed on this API, allowing an authenticated user to run arbitrary commands on the server.

In Bender/ebee Charge Controllers in multiple versions are prone to Command injection via Web interface. An authenticated attacker could enter shell commands into some input fields that are executed with root privileges.

reNgine before 2.1.2 allows OS Command Injection if an adversary has a valid session ID. The attack places shell metacharacters in an api/tools/waf_detector/?url= string. The commands are executed as root via subprocess.check_output.

An authenticated command injection vulnerability in Weintek cMT2078X easyweb Web Version v2.1.3, OS v20220215 allows attackers to execute arbitrary code or access sensitive information via injecting a crafted payload into the HMI Name parameter.

An OS command injection vulnerability exists in AE1021PE firmware version 2.0.9 and earlier and AE1021 firmware version 2.0.9 and earlier. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker who can log in to the product.

Flowise before 3.1.2 contains multiple OS command injection vulnerabilities in the Custom MCP Server feature due to incomplete command-flag validation and a regex bypass in local file access restrictions. An attacker with a Flowise account of any role, or API access with view/update permissions for chatflows, can configure a malicious MCP server to bypass the validateCommandFlags blocklist (for example, 'docker build' is not blocked, and 'npx --yes' is not blocked while only '-y' is) and the validateArgsForLocalFileAccess checks, resulting in execution of arbitrary commands on the Flowise host.

Unsanitized input in an OS command in the virtual desktop session name handling in AWS Research and Engineering Studio (RES) version 2025.03 through 2025.12.01 might allow a remote authenticated actor to execute arbitrary commands as root on the virtual desktop host via a crafted session name. To remediate this issue, users are advised to upgrade to RES version 2026.03 or apply the corresponding mitigation patch to their existing environment.

luci-app-tailscale-community contains a command injection vulnerability in the tailscale.do_login RPC method that allows authenticated users to execute arbitrary commands as root. The vulnerability exists because user-controlled loginserver and loginserver_authkey parameters are improperly quoted within a double-quoted shell command, allowing shell substitutions like $() to be evaluated by the outer shell before argument processing.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 allows attacker to execute unauthorized code or commands via specifically crafted http get request parameters

A Remote Code Execution (RCE) vulnerability was found in includes/baijiacms/common.inc.php in baijiacms v4.

A format string vulnerability was identified in SMM/SMM2 and FPC that could allow an authenticated user to execute arbitrary commands on a specific API endpoint.

luci-proto-openvpn through 0.11.1, fixed in commit e4ff45e, contains a command injection vulnerability in the generateKey ubus method where the cl_meta parameter is interpolated into a shell command without proper escaping or quoting. An authenticated LuCI user with OpenVPN protocol configuration access can inject arbitrary shell metacharacters into cl_meta to execute commands as root via the popen function.

MyQ Server in MyQ X Smart before 8.2 allows remote code execution by unprivileged users because administrative session data can be read in the %PROGRAMFILES%\MyQ\PHP\Sessions directory. The "Select server file" feature is only intended for administrators but actually does not require authorization. An attacker can inject arbitrary OS commands (such as commands to create new .php files) via the Task Scheduler component.

A vulnerability in the web-based management interface of Cisco Identity Services Engine could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system. This vulnerability is due to improper validation of user input within requests as part of the web-based management interface. An attacker could exploit this vulnerability by manipulating requests to the web-based management interface to contain operating system commands. A successful exploit could allow the attacker to execute arbitrary operating system commands on the underlying operating system with the privileges of the web services user. Cisco has not yet released software updates that address this vulnerability.

Authenticated user can execute arbitrary commands in the context of the root user by providing payload in the "destination" field of the network test tools. This is similar to the vulnerability CVE-2021-28151 mitigated on the user interface level by blacklisting characters with JavaScript, however, it can still be exploited by sending POST requests directly.

Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.

Acemanager in ALEOS before version 4.16 allows a user with valid credentials to manipulate the IP logging operation to execute arbitrary shell commands on the device.

A vulnerability was detected in Trendnet TEW-657BRM 1.00.1. Affected is the function ping_test of the file /setup.cgi. Performing a manipulation of the argument c4_IPAddr results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in TRENDnet TEW-821DAP up to 1.12B01. The impacted element is the function tools_diagnostic of the file /tmp/diagnostic of the component Firmware Udpate. This manipulation causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Trendnet TEW-657BRM 1.00.1. Affected by this issue is the function vpn_drop of the file /setup.cgi. The manipulation of the argument policy_name leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

Maxprint Maxlink 1200G v3.4.11E has an OS command injection vulnerability in the "Diagnostic tool" functionality of the device.

An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later

Due to the improper neutralization of special elements used in a name parameter a low privileged remote attacker can exploit a command injection vulnerability in the Managed Ethernet Switch, resulting in full system compromise.

In DrayTek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the rename_table function.

A weakness has been identified in Trendnet TEW-657BRM 1.00.1. This affects the function add_wps_client of the file /setup.cgi. This manipulation of the argument wl_enrolee_pin causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.2 and later

An OS command injection vulnerability has been reported to affect QuMagie. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QuMagie 2.2.1 and later

A security flaw has been discovered in Tenda HG3 2.0 300003070. This vulnerability affects the function formgponConf of the file /boaform/admin/formgponConf. The manipulation of the argument fmgpon_loid results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A potential vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow a remote authenticated user on the local network to execute arbitrary commands on the device.

A command injection vulnerability exists in the Zingbox Inspector versions 1.286 and earlier, that allows for an authenticated user to execute arbitrary system commands in the CLI.

Hermes WebUI before version 0.51.311 contains a remote code execution vulnerability that allows authenticated attackers to execute arbitrary commands by placing malicious executable Git configuration in a workspace repository's .git/config file. Attackers can exploit Git subprocess invocations in api/workspace_git.py through vectors such as core.fsmonitor during git status, protocol.ext.allow with ext:: remotes during git fetch, credential.helper, core.askPass, core.gitProxy, or inherited environment variables including GIT_SSH_COMMAND to achieve arbitrary command execution on the host running the application.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation of user supplied data that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP POST request to the NX-API of an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system. Note: The NX-API feature is disabled by default.

File-Manager in MGT CloudPanel 2.0.0 through 2.3.2 allows the lowest privilege user to achieve OS command injection by changing file ownership and changing file permissions to 4755.

A vulnerability was identified in Totolink A3300R 17.0.0cu.557_b20221024. This affects the function setLanCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument lanIp leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

A vulnerability was detected in Tenda HG3 2.0. The impacted element is an unknown function of the file /boaform/formCountrystr. The manipulation of the argument countrystr results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

A problem was found in Centreon Web through 19.04.3. An authenticated command injection is present in the page include/configuration/configObject/traps-mibs/formMibs.php. This page is called from the Centreon administration interface. This is the mibs management feature that contains a file filing form. At the time of submission of a file, the mnftr parameter is sent to the page and is not filtered properly. This allows one to inject Linux commands directly.

A vulnerability in the “Remote Logging” functionality of the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to execute arbitrary OS commands in the context of user “root” via a crafted HTTP request.

Dell DM5500 contains a privilege escalation vulnerability in the appliance. A remote attacker with low privileges could potentially exploit this vulnerability to escape the restricted shell and gain root access to the appliance.

An issue in YeaLinkSIP-T19P-E2 v.53.84.0.15 allows a remote privileged attacker to execute arbitrary code via a crafted request the ping function of the diagnostic component.