In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region() Do the cache flush of converted pages in svm_register_enc_region() before dropping kvm->lock to fix use-after-free issues where region and/or its array of pages could be freed by a different task, e.g. if userspace has __unregister_enc_region_locked() already queued up for the region. Note, the "obvious" alternative of using local variables doesn't fully resolve the bug, as region->pages is also dynamically allocated. I.e. the region structure itself would be fine, but region->pages could be freed. Flushing multiple pages under kvm->lock is unfortunate, but the entire flow is a rare slow path, and the manual flush is only needed on CPUs that lack coherency for encrypted memory.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci_rt1711h: unregister TCPCI port with devres rt1711h_probe() registers the TCPCI port before requesting the interrupt and enabling alert interrupts. If either of those later steps fails, the probe function returns without unregistering the TCPCI port. The explicit unregister currently only happens from the remove callback. Register a devres action immediately after tcpci_register_port() succeeds, so tcpci_unregister_port() runs on later probe failures and on driver detach. Drop the remove callback to avoid unregistering the same port twice. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_free_transaction() In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown.

In the Linux kernel, the following vulnerability has been resolved: ALSA: compress: Fix task creation error unwind snd_compr_task_new() allocates the driver task before validating the returned DMA buffers and reserving file descriptors. When either of those later steps fails, the core frees its task wrapper and DMA-buffer references without calling the driver's task_free() callback. Any driver resources allocated by task_create() are therefore leaked. The dual-fd allocation path also jumps to cleanup without storing the negative get_unused_fd_flags() result in retval. Since retval still contains the successful task_create() return value, TASK_CREATE can incorrectly report success although the task was discarded. Preserve the fd allocation errors and call task_free() when failure occurs after a successful task_create() callback.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - remove unused character device and IOCTLs The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: don't check if plane->state->fb == state->fb Currently, when using non-blocking commits, we can see the following kernel warning: [ 110.908514] ------------[ cut here ]------------ [ 110.908529] refcount_t: underflow; use-after-free. [ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0 [ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32 [ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0 [ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0 [ 110.909170] sp : ffffffc00913b9c0 [ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60 [ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480 [ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78 [ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000 [ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004 [ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003 [ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00 [ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572 [ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000 [ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001 [ 110.909434] Call trace: [ 110.909441] refcount_dec_not_one+0xb8/0xc0 [ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4] [ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4] [ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper] [ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4] [ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper] [ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper] [ 110.911716] drm_atomic_commit+0xb0/0xdc [drm] [ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm] [ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm] [ 110.914091] drm_ioctl+0x24c/0x3b0 [drm] [ 110.914850] __arm64_sys_ioctl+0x9c/0xd4 [ 110.914873] invoke_syscall+0x4c/0x114 [ 110.914897] el0_svc_common+0xd0/0x118 [ 110.914917] do_el0_svc+0x38/0xd0 [ 110.914936] el0_svc+0x30/0x8c [ 110.914958] el0t_64_sync_handler+0x84/0xf0 [ 110.914979] el0t_64_sync+0x18c/0x190 [ 110.914996] ---[ end trace 0000000000000000 ]--- This happens because, although `prepare_fb` and `cleanup_fb` are perfectly balanced, we cannot guarantee consistency in the check plane->state->fb == state->fb. This means that sometimes we can increase the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The opposite can also be true. In fact, the struct drm_plane .state shouldn't be accessed directly but instead, the `drm_atomic_get_new_plane_state()` helper function should be used. So, we could stick to this check, but using `drm_atomic_get_new_plane_state()`. But actually, this check is not re ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the maximum transfer length and the size of the transfer buffer. As such, it does not account for the 4 bytes of header that prepends the SPI data frame. This can result in out-of-bounds accesses and was confirmed with KASAN. Introduce SPI_HDRSIZE to account for the header and use to allocate the transfer buffer.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: Fix double free of skb in coredump hci_devcd_append() would free the skb on error so the caller don't have to free it again otherwise it would cause the double free of skb. Reported-by : Dan Carpenter <dan.carpenter@linaro.org>

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_stats_proc_write() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: mptcp: prevent BPF accessing lowat from a subflow socket. Alexei reported the following splat: WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0 Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)] CPU: 32 PID: 3276 Comm: test_progs Tainted: GO 6.8.0-12873-g2c43c33bfd23 Call Trace: <TASK> mptcp_set_rcvlowat+0x79/0x1d0 sk_setsockopt+0x6c0/0x1540 __bpf_setsockopt+0x6f/0x90 bpf_sock_ops_setsockopt+0x3c/0x90 bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132 bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86 __cgroup_bpf_run_filter_sock_ops+0xbc/0x250 tcp_connect+0x879/0x1160 tcp_v6_connect+0x50c/0x870 mptcp_connect+0x129/0x280 __inet_stream_connect+0xce/0x370 inet_stream_connect+0x36/0x50 bpf_trampoline_6442491565+0x49/0xef inet_stream_connect+0x5/0x50 __sys_connect+0x63/0x90 __x64_sys_connect+0x14/0x20 The root cause of the issue is that bpf allows accessing mptcp-level proto_ops from a tcp subflow scope. Fix the issue detecting the problematic call and preventing any action.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_stats_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_valid_lease_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix the dead loop of MPLS parse The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type '__be32 [3]' CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7)

In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8)

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: Increase weight to u16 In CLOS networks, as link failures occur at various points in the network, ECMP weights of the involved nodes are adjusted to compensate. With high fan-out of the involved nodes, and overall high number of nodes, a (non-)ECMP weight ratio that we would like to configure does not fit into 8 bits. Instead of, say, 255:254, we might like to configure something like 1000:999. For these deployments, the 8-bit weight may not be enough. To that end, in this patch increase the next hop weight from u8 to u16. Increasing the width of an integral type can be tricky, because while the code still compiles, the types may not check out anymore, and numerical errors come up. To prevent this, the conversion was done in two steps. First the type was changed from u8 to a single-member structure, which invalidated all uses of the field. This allowed going through them one by one and audit for type correctness. Then the structure was replaced with a vanilla u16 again. This should ensure that no place was missed. The UAPI for configuring nexthop group members is that an attribute NHA_GROUP carries an array of struct nexthop_grp entries: struct nexthop_grp { __u32 id; /* nexthop id - must exist */ __u8 weight; /* weight of this nexthop */ __u8 resvd1; __u16 resvd2; }; The field resvd1 is currently validated and required to be zero. We can lift this requirement and carry high-order bits of the weight in the reserved field: struct nexthop_grp { __u32 id; /* nexthop id - must exist */ __u8 weight; /* weight of this nexthop */ __u8 weight_high; __u16 resvd2; }; Keeping the fields split this way was chosen in case an existing userspace makes assumptions about the width of the weight field, and to sidestep any endianness issues. The weight field is currently encoded as the weight value minus one, because weight of 0 is invalid. This same trick is impossible for the new weight_high field, because zero must mean actual zero. With this in place: - Old userspace is guaranteed to carry weight_high of 0, therefore configuring 8-bit weights as appropriate. When dumping nexthops with 16-bit weight, it would only show the lower 8 bits. But configuring such nexthops implies existence of userspace aware of the extension in the first place. - New userspace talking to an old kernel will work as long as it only attempts to configure 8-bit weights, where the high-order bits are zero. Old kernel will bounce attempts at configuring >8-bit weights. Renaming reserved fields as they are allocated for some purpose is commonly done in Linux. Whoever touches a reserved field is doing so at their own risk. nexthop_grp::resvd1 in particular is currently used by at least strace, however they carry an own copy of UAPI headers, and the conversion should be trivial. A helper is provided for decoding the weight out of the two fields. Forcing a conversion seems preferable to bending backwards and introducing anonymous unions or whatever.

In the Linux kernel, the following vulnerability has been resolved: xsk: fix OOB map writes when deleting elements Jordy says: " In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check: if (k >= map->max_entries) return -EINVAL; This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access. spin_lock_bh(&m->lock); map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry); spin_unlock_bh(&m->lock); The xchg operation can then be used to cause an out-of-bounds write. Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption. " It indeed results in following splat: [76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace: [76613.046331] <TASK> [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default.

In the Linux kernel, the following vulnerability has been resolved: ice: copy last block omitted in ice_get_module_eeprom() ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ ....

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF issue in ksmbd_tcp_new_connection() The race is between the handling of a new TCP connection and its disconnection. It leads to UAF on `struct tcp_transport` in ksmbd_tcp_new_connection() function.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr [Why] There is a potential memory access violation while iterating through array of dcn35 clks. [How] Limit iteration per array size.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o

In the Linux kernel, the following vulnerability has been resolved: r8169: fix LED-related deadlock on module removal Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix DEVMAP_HASH overflow check on 32-bit arches The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation.

In the Linux kernel, the following vulnerability has been resolved: media: edia: dvbdev: fix a use-after-free In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed in several error-handling paths. However, *pdvbdev is not set to NULL after dvbdev's deallocation, causing use-after-frees in many places, for example, in the following call chain: budget_register |-> dvb_dmxdev_init |-> dvb_register_device |-> dvb_dmxdev_release |-> dvb_unregister_device |-> dvb_remove_device |-> dvb_device_put |-> kref_put When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in dvb_register_device) could point to memory that had been freed in dvb_register_device. Thereafter, this pointer is transferred to kref_put and triggering a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active.

In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_newlink() The gtp_link_ops operations structure for the subsystem must be registered after registering the gtp_net_ops pernet operations structure. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: [ 1010.702740] gtp: GTP module unloaded [ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI [ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1 [ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 [ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00 [ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203 [ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000 [ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282 [ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000 [ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80 [ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400 [ 1010.715953] FS: 00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000 [ 1010.715958] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0 [ 1010.715968] PKRU: 55555554 [ 1010.715972] Call Trace: [ 1010.715985] ? __die_body.cold+0x1a/0x1f [ 1010.715995] ? die_addr+0x43/0x70 [ 1010.716002] ? exc_general_protection+0x199/0x2f0 [ 1010.716016] ? asm_exc_general_protection+0x1e/0x30 [ 1010.716026] ? gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.716034] ? gtp_net_exit+0x150/0x150 [gtp] [ 1010.716042] __rtnl_newlink+0x1063/0x1700 [ 1010.716051] ? rtnl_setlink+0x3c0/0x3c0 [ 1010.716063] ? is_bpf_text_address+0xc0/0x1f0 [ 1010.716070] ? kernel_text_address.part.0+0xbb/0xd0 [ 1010.716076] ? __kernel_text_address+0x56/0xa0 [ 1010.716084] ? unwind_get_return_address+0x5a/0xa0 [ 1010.716091] ? create_prof_cpu_mask+0x30/0x30 [ 1010.716098] ? arch_stack_walk+0x9e/0xf0 [ 1010.716106] ? stack_trace_save+0x91/0xd0 [ 1010.716113] ? stack_trace_consume_entry+0x170/0x170 [ 1010.716121] ? __lock_acquire+0x15c5/0x5380 [ 1010.716139] ? mark_held_locks+0x9e/0xe0 [ 1010.716148] ? kmem_cache_alloc_trace+0x35f/0x3c0 [ 1010.716155] ? __rtnl_newlink+0x1700/0x1700 [ 1010.716160] rtnl_newlink+0x69/0xa0 [ 1010.716166] rtnetlink_rcv_msg+0x43b/0xc50 [ 1010.716172] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716179] ? lock_acquire+0x1fe/0x560 [ 1010.716188] ? netlink_deliver_tap+0x12f/0xd50 [ 1010.716196] netlink_rcv_skb+0x14d/0x440 [ 1010.716202] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716208] ? netlink_ack+0xab0/0xab0 [ 1010.716213] ? netlink_deliver_tap+0x202/0xd50 [ 1010.716220] ? netlink_deliver_tap+0x218/0xd50 [ 1010.716226] ? __virt_addr_valid+0x30b/0x590 [ 1010.716233] netlink_unicast+0x54b/0x800 [ 1010.716240] ? netlink_attachskb+0x870/0x870 [ 1010.716248] ? __check_object_size+0x2de/0x3b0 [ 1010.716254] netlink_sendmsg+0x938/0xe40 [ 1010.716261] ? netlink_unicast+0x800/0x800 [ 1010.716269] ? __import_iovec+0x292/0x510 [ 1010.716276] ? netlink_unicast+0x800/0x800 [ 1010.716284] __sock_sendmsg+0x159/0x190 [ 1010.716290] ____sys_sendmsg+0x712/0x880 [ 1010.716297] ? sock_write_iter+0x3d0/0x3d0 [ 1010.716304] ? __ia32_sys_recvmmsg+0x270/0x270 [ 1010.716309] ? lock_acquire+0x1fe/0x560 [ 1010.716315] ? drain_array_locked+0x90/0x90 [ 1010.716324] ___sys_sendmsg+0xf8/0x170 [ 1010.716331] ? sendmsg_copy_msghdr+0x170/0x170 [ 1010.716337] ? lockdep_init_map ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fork: defer linking file vma until vma is fully initialized Thorvald reported a WARNING [1]. And the root cause is below race: CPU 1 CPU 2 fork hugetlbfs_fallocate dup_mmap hugetlbfs_punch_hole i_mmap_lock_write(mapping); vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree. i_mmap_unlock_write(mapping); hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem! i_mmap_lock_write(mapping); hugetlb_vmdelete_list vma_interval_tree_foreach hugetlb_vma_trylock_write -- Vma_lock is cleared. tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem! hugetlb_vma_unlock_write -- Vma_lock is assigned!!! i_mmap_unlock_write(mapping); hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside i_mmap_rwsem lock while vma lock can be used in the same time. Fix this by deferring linking file vma until vma is fully initialized. Those vmas should be initialized first before they can be used.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10

In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() Apply the same fix than ones found in : 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. syzbot reported: BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389 ipgre_rcv net/ipv4/ip_gre.c:411 [inline] gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447 gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 netif_receive_skb_internal net/core/dev.c:5734 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5793 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556 tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133 alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204 skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909 tun_build_skb drivers/net/tun.c:1686 [inline] tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b

In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests to submit, we process them and send them off, and then in the completion path for the commit requests we have if (nfs_commit_end(cinfo.mds)) nfs_direct_write_complete(dreq); However since we're submitting asynchronous requests we sometimes have one that completes before we submit the next one, so we end up calling complete on the nfs_direct_request twice. The only other place we use nfs_generic_commit_list() is in __nfs_commit_inode, which wraps this call in a nfs_commit_begin(); nfs_commit_end(); Which is a common pattern for this style of completion handling, one that is also repeated in the direct code with get_dreq()/put_dreq() calls around where we process events as well as in the completion paths. Fix this by using the same pattern for the commit requests. Before with my 200 node rocksdb stress running this warning would pop every 10ish minutes. With my patch the stress test has been running for several hours without popping.

In the Linux kernel, the following vulnerability has been resolved: lan966x: Fix crash when adding interface under a lag There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix writeback data corruption cifs writeback doesn't correctly handle the case where cifs_extend_writeback() hits a point where it is considering an additional folio, but this would overrun the wsize - at which point it drops out of the xarray scanning loop and calls xas_pause(). The problem is that xas_pause() advances the loop counter - thereby skipping that page. What needs to happen is for xas_reset() to be called any time we decide we don't want to process the page we're looking at, but rather send the request we are building and start a new one. Fix this by copying and adapting the netfslib writepages code as a temporary measure, with cifs writeback intending to be offloaded to netfslib in the near future. This also fixes the issue with the use of filemap_get_folios_tag() causing retry of a bunch of pages which the extender already dealt with. This can be tested by creating, say, a 64K file somewhere not on cifs (otherwise copy-offload may get underfoot), mounting a cifs share with a wsize of 64000, copying the file to it and then comparing the original file and the copy: dd if=/dev/urandom of=/tmp/64K bs=64k count=1 mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000 cp /tmp/64K /mnt/64K cmp /tmp/64K /mnt/64K Without the fix, the cmp fails at position 64000 (or shortly thereafter).

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix hashtab overflow check on 32-bit arches The hashtab code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. So apply the same fix to hashtab, by moving the overflow check to before the roundup.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stackmap overflow check on 32-bit arches The stackmap code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. The commit in the fixes tag actually attempted to fix this, but the fix did not account for the UB, so the fix only works on CPUs where an overflow does result in a neat truncation to zero, which is not guaranteed. Checking the value before rounding does not have this problem.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent potential buffer overflow in map_hw_resources Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue [why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_debug_files_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: ceph: prevent use-after-free in encode_cap_msg() In fs/ceph/caps.c, in encode_cap_msg(), "use after free" error was caught by KASAN at this line - 'ceph_buffer_get(arg->xattr_buf);'. This implies before the refcount could be increment here, it was freed. In same file, in "handle_cap_grant()" refcount is decremented by this line - 'ceph_buffer_put(ci->i_xattrs.blob);'. It appears that a race occurred and resource was freed by the latter line before the former line could increment it. encode_cap_msg() is called by __send_cap() and __send_cap() is called by ceph_check_caps() after calling __prep_cap(). __prep_cap() is where arg->xattr_buf is assigned to ci->i_xattrs.blob. This is the spot where the refcount must be increased to prevent "use after free" error.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe() 'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling mtk_free_clk_data() explicitly in the remove function would lead to a double-free. Remove the redundant call.

In the Linux kernel, the following vulnerability has been resolved: llc: call sock_orphan() at release time syzbot reported an interesting trace [1] caused by a stale sk->sk_wq pointer in a closed llc socket. In commit ff7b11aa481f ("net: socket: set sock->sk to NULL after calling proto_ops::release()") Eric Biggers hinted that some protocols are missing a sock_orphan(), we need to perform a full audit. In net-next, I plan to clear sock->sk from sock_orphan() and amend Eric patch to add a warning. [1] BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline] BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline] BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline] BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27 CPU: 1 PID: 27 Comm: ksoftirqd/1 Not tainted 6.8.0-rc1-syzkaller-00049-g6098d87eaf31 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 list_empty include/linux/list.h:373 [inline] waitqueue_active include/linux/wait.h:127 [inline] sock_def_write_space_wfree net/core/sock.c:3384 [inline] sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 skb_release_head_state+0xa3/0x2b0 net/core/skbuff.c:1080 skb_release_all net/core/skbuff.c:1092 [inline] napi_consume_skb+0x119/0x2b0 net/core/skbuff.c:1404 e1000_unmap_and_free_tx_resource+0x144/0x200 drivers/net/ethernet/intel/e1000/e1000_main.c:1970 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3860 [inline] e1000_clean+0x4a1/0x26e0 drivers/net/ethernet/intel/e1000/e1000_main.c:3801 __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x956/0xe90 net/core/dev.c:6778 __do_softirq+0x21a/0x8de kernel/softirq.c:553 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x31/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x660/0xa10 kernel/smpboot.c:164 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 </TASK> Allocated by task 5167: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_lru+0x142/0x6f0 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3019 [inline] sock_alloc_inode+0x25/0x1c0 net/socket.c:308 alloc_inode+0x5d/0x220 fs/inode.c:260 new_inode_pseudo+0x16/0x80 fs/inode.c:1005 sock_alloc+0x40/0x270 net/socket.c:634 __sock_create+0xbc/0x800 net/socket.c:1535 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x14c/0x260 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1718 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 0: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x121/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inlin ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free in do_zone_finish() Shinichiro reported the following use-after-free triggered by the device replace operation in fstests btrfs/070. BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0 ================================================================== BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs] Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007 CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0x200/0x3e0 kasan_report+0xd8/0x110 ? do_zone_finish+0x91a/0xb90 [btrfs] ? do_zone_finish+0x91a/0xb90 [btrfs] do_zone_finish+0x91a/0xb90 [btrfs] btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs] ? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs] ? btrfs_put_root+0x2d/0x220 [btrfs] ? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs] cleaner_kthread+0x21e/0x380 [btrfs] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs] kthread+0x2e3/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 3493983: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_alloc_device+0xb3/0x4e0 [btrfs] device_list_add.constprop.0+0x993/0x1630 [btrfs] btrfs_scan_one_device+0x219/0x3d0 [btrfs] btrfs_control_ioctl+0x26e/0x310 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 3494056: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3f/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x32/0x70 kfree+0x11b/0x320 btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs] btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs] btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs] btrfs_ioctl+0xb27/0x57d0 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 The buggy address belongs to the object at ffff8881543c8000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 96 bytes inside of freed 1024-byte region [ffff8881543c8000, ffff8881543c8400) The buggy address belongs to the physical page: page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8 head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb This UAF happens because we're accessing stale zone information of a already removed btrfs_device in do_zone_finish(). The sequence of events is as follows: btrfs_dev_replace_start btrfs_scrub_dev btrfs_dev_replace_finishing btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced btrfs_rm_dev_replace_free_srcdev btrfs_free_device <-- device freed cleaner_kthread btrfs_delete_unused_bgs btrfs_zone_finish do_zone_finish <-- refers the freed device The reason for this is that we're using a ---truncated---