A vulnerability was detected in D-Link DI-7100G C1 24.04.18D1. Affected by this issue is the function set_jhttpd_info. Performing a manipulation of the argument usb_username results in command injection. Remote exploitation of the attack is possible.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.

A vulnerability was found in r-huijts xcode-mcp-server up to f3419f00117aa9949e326f78cc940166c88f18cb. This affects the function registerXcodeTools of the file src/tools/xcode/index.ts of the component run_lldb. The manipulation of the argument args results in command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The patch is identified as 11f8d6bacadd153beee649f92a78a9dad761f56f. Applying a patch is advised to resolve this issue.

EMC Documentum D2 version 4.5 and EMC Documentum D2 version 4.6 has a DQL Injection Vulnerability that could potentially be exploited by malicious users to compromise the affected system. An authenticated low-privileged attacker could potentially exploit this vulnerability to access information, modify data or disrupt services by causing execution of arbitrary DQL commands on the application.

An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the console infactory_net functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

An OS command injection vulnerability exists in the daretools binary functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

Brandon Rothel from QED Secure Solutions and Sam Hanson of Dragos have found that the VAPIX API tcptest.cgi did not have a sufficient input validation allowing for a possible remote code execution. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. The impact of exploiting this vulnerability is lower with operator-privileges compared to administrator-privileges service accounts. Please refer to the Axis security advisory for more information and solution.

A vulnerability has been found in D-Link DWR-M921 1.1.50. This impacts an unknown function of the file /boafrm/formLtefotaUpgradeFibocom. Such manipulation of the argument fota_url leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Nagios XI 5.7.2 is affected by a remote code execution (RCE) vulnerability. An authenticated user can inject additional commands into normal webapp query.

Jenkins Pipeline: Multibranch Plugin 706.vd43c65dec013 and earlier uses the same checkout directories for distinct SCMs for the readTrusted step, allowing attackers with Item/Configure permission to invoke arbitrary OS commands on the controller through crafted SCM contents.

An issue was discovered in Pivotal Greenplum before 4.3.10.0. Creation of external tables using GPHDFS protocol has a vulnerability whereby arbitrary commands can be injected into the system. In order to exploit this vulnerability the user must have superuser 'gpadmin' access to the system or have been granted GPHDFS protocol permissions in order to create a GPHDFS external table.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

xymond in Xymon 4.1.x, 4.2.x, and 4.3.x before 4.3.25 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the adduser_name argument in (1) web/useradm.c or (2) web/chpasswd.c.

A vulnerability was determined in D-Link DCS-933L up to 1.14.11. This affects an unknown function of the file /setSystemAdmin of the component alphapd. This manipulation of the argument AdminID causes command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

IBM Resilient OnPrem 38.2 could allow a privileged user to inject malicious commands through Python3 scripting. IBM X-Force ID: 185503.

KDDI HOME SPOT CUBE devices before 2 allow remote authenticated users to execute arbitrary OS commands via unspecified vectors.

The administrative web interface in Cisco TelePresence Video Communication Server Expressway X8.5.2 allows remote authenticated users to execute arbitrary commands via crafted fields, aka Bug ID CSCuv12531.

A flaw has been found in D-Link DI-7100G C1 24.04.18D1. This affects the function start_proxy_client_email. Executing a manipulation can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.

Synology Photo Station before 6.3-2958 allows remote authenticated guest users to execute arbitrary commands via shell metacharacters in the X-Forwarded-For HTTP header to photo/login.php.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later)

A flaw has been found in D-Link DWR-M921 1.1.50. This affects the function sub_419920 of the file /boafrm/formLtefotaUpgradeQuectel. This manipulation of the argument fota_url causes command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used.

IBM Rational Quality Manager (RQM) and Rational Collaborative Lifecycle Management 3.0.1.6 before iFix8, 4.x before 4.0.7 iFix11, 5.x before 5.0.2 iFix17, and 6.x before 6.0.1 ifix3 allow remote authenticated users to execute arbitrary OS commands via a crafted "HTML request."

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230807. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237517 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This vulnerability affects the function setTracerouteCfg. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-237514 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The snaptPowered2 component of Snapt Aria v12.8 was discovered to contain a command injection vulnerability. This vulnerability allows authenticated attackers to execute arbitrary commands.

A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023. This affects the function setDiagnosisCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237513 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Yale WIPC-303W 2.21 through 2.31 camera is vulnerable to remote command execution (RCE) through command injection via the HTTP API. NOTE: This may be a duplicate of CVE-2020-10176

A vulnerability was found in wonderwhy-er DesktopCommanderMCP up to 0.2.13. The impacted element is the function CommandManager of the file src/command-manager.ts. Performing manipulation results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

A vulnerability was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This issue affects the function setWanCfg. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-237515. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in File service functionality in Synology DiskStation Manager (DSM) before 6.2.4-25556-2 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

A security flaw has been discovered in Industrial Application Software IAS Canias ERP 8.03. Impacted is the function Runtime.getRuntime.exec of the component RMI Interface. Performing a manipulation of the argument troiaCode results in os command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 3 of 46).

The package snyk before 1.1064.0; the package snyk-mvn-plugin before 2.31.3; the package snyk-gradle-plugin before 3.24.5; the package @snyk/snyk-cocoapods-plugin before 2.5.3; the package snyk-sbt-plugin before 2.16.2; the package snyk-python-plugin before 1.24.2; the package snyk-docker-plugin before 5.6.5; the package @snyk/snyk-hex-plugin before 1.1.6 are vulnerable to Command Injection due to an incomplete fix for [CVE-2022-40764](https://security.snyk.io/vuln/SNYK-JS-SNYK-3037342). A successful exploit allows attackers to run arbitrary commands on the host system where the Snyk CLI is installed by passing in crafted command line flags. In order to exploit this vulnerability, a user would have to execute the snyk test command on untrusted files. In most cases, an attacker positioned to control the command line arguments to the Snyk CLI would already be positioned to execute arbitrary commands. However, this could be abused in specific scenarios, such as continuous integration pipelines, where developers can control the arguments passed to the Snyk CLI to leverage this component as part of a wider attack against an integration/build pipeline. This issue has been addressed in the latest Snyk Docker images available at https://hub.docker.com/r/snyk/snyk as of 2022-11-29. Images downloaded and built prior to that date should be updated. The issue has also been addressed in the Snyk TeamCity CI/CD plugin as of version v20221130.093605.

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

An OS command injection vulnerability has been reported to affect QcalAgent. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QcalAgent 1.1.8 and later

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230722 and classified as critical. This issue affects some unknown processing of the file importhtml.php. The manipulation of the argument sql leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-235967. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Tenda AC6 15.03.06.23. Affected by this vulnerability is the function formWifiApScan of the file /goform/WifiApScan of the component httpd. Executing a manipulation of the argument wl2g.public.country/wl5g.public.country can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

A flaw has been found in D-Link DIR-513 1.10. The impacted element is an unknown function of the file /goform/formSysCmd. Executing a manipulation of the argument sysCmd can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DAR-7000 up to 20240912. Affected is an unknown function of the file /view/DBManage/Backup_Server_commit.php. The manipulation of the argument host leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

Command Injection in PHPMyWind v5.6 allows remote attackers to execute arbitrary code via the "text color" field of the component '/admin/web_config.php'.

A vulnerability was detected in UTT HiPER 810 1.7.4-141218. The impacted element is the function sub_43F020 of the file /goform/formPdbUpConfig. Performing a manipulation of the argument policyNames results in command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.