A flaw was found in libxml2. This vulnerability occurs when the library processes a specially crafted XML Schema Definition (XSD) validated document that includes an internal entity reference. An attacker could exploit this by providing a malicious document, leading to a type confusion error that causes the application to crash. This results in a denial of service (DoS), making the affected system or application unavailable.

IBM Security Guardium 11.1 could allow an attacker on the same network to gain access to the Solr dashboard and cause a denial of service attack. IBM X-Force ID: 176997.

IBM Security Identity Governance and Intelligence 5.2.6 could allow a user to cause a denial of service due to improperly validating a supplied URL, rendering the application unusuable. IBM X-Force ID: 189375.

IBM Counter Fraud Management for Safer Payments 6.1.0.00, 6.2.0.00, 6.3.0.00 through 6.3.1.03, 6.4.0.00 through 6.4.2.02 and 6.5.0.00 does not properly allocate resources without limits or throttling which could allow a remote attacker to cause a denial of service. IBM X-Force ID: 249190.

IBM Sterling Secure Proxy 6.0.3.0, 6.0.2.0, and 3.4.3.2 and IBM Sterling External Authentication Server are vulnerable a buffer overflow, due to the Jetty based GUI in the Secure Zone not properly validating the sizes of the form content and/or HTTP headers submitted. A local attacker positioned inside the Secure Zone could submit a specially crafted HTTP request to disrupt service. IBM X-Force ID: 219133.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service in configurations where an attacker has write access to parts of the server configuration.

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to running out of memory when executing certain queries with MDC tables.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

IBM Langflow OSS 1.0.0 through 1.9.0 could allow a denial of service due to uncontrolled resource consumption.

Unspecified vulnerability in IBM Java 8 before SR1 allows remote attackers to cause a denial of service via unknown vectors related to SSL/TLS and the Secure Socket Extension provider.

IBM WebSphere Application Server - Liberty 19.0.0.7 through 26.0.0.5 and IBM WebSphere Application Server 9.0, and 8.5 and WebSphere Application Server Liberty are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, 11.5 is vulnerable to denial of service under extreme stress conditions. IBM X-Force ID: 264807.

IBM Sterling B2B Integrator 6.0.0.0 through 6.0.3.8 and 6.1.0.0 through 6.1.2.3 could allow an authenticated user to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 255827.

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when executing a specially crafted query with a small statement heap.

IBM MQ Clients 9.2 CD, 9.3 CD, and 9.3 LTS are vulnerable to a denial of service attack when processing configuration files. IBM X-Force ID: 244216.

A flaw was found in the Linux kernel. Measuring usage of the shared memory does not scale with large shared memory segment counts which could lead to resource exhaustion and DoS.

IBM WebSphere MQ 7.1 and 7.5: Queue manager has a DoS vulnerability

IBM Security Verify Privilege On-Premises 11.5 could allow a privileged user to cause by using a malicious payload. IBM X-Force ID: 240634.

IBM QRadar WinCollect Agent 10.0 through 10.1.2 could allow a privileged user to cause a denial of service. IBM X-Force ID: 240151.

IBM AIX's 7.3 Python implementation could allow a non-privileged local user to exploit a vulnerability to cause a denial of service. IBM X-Force ID: 267965.

A flaw was found in the libxml2 library. This uncontrolled resource consumption vulnerability occurs when processing XML catalogs that contain repeated <nextCatalog> elements pointing to the same downstream catalog. A remote attacker can exploit this by supplying crafted catalogs, causing the parser to redundantly traverse catalog chains. This leads to excessive CPU consumption and degrades application availability, resulting in a denial-of-service condition.

IBM AIX 7.1, 7.2, 7.3, and VIOS 3.1could allow a non-privileged local user to exploit a vulnerability in CAA to cause a denial of service. IBM X-Force ID: 235183.

IBM AIX 7.1, 7.2, 7.3, and VIOS 3.1could allow a non-privileged local user to exploit a vulnerability in the AIX kernel to cause a denial of service. IBM X-Force ID: 235181.

IBM MQ 9.1.0.0, 9.1.0.1, 9.1.1, and 9.1.0.2 is vulnerable to a denial of service due to a local user being able to fill up the disk space of the underlying filesystem using the error logging service. IBM X-Force ID: 156398.

IBM TXSeries for Multiplatforms, 8.1, 8.2, and 9.1, CICS TX Standard CICS TX Advanced 10.1 and 11.1 could allow a privileged user to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 266016.

IBM Security Directory Suite VA 8.0.1 could allow an attacker to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 228588.

IBM WebSphere Application Server Liberty 22.0.0.13 through 23.0.0.7 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 262567.

IBM TXSeries for Multiplatforms 8.1, 8.2, and 9.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. IBM X-Force ID: 262905.

IBM Spectrum Protect Plus 10.1.0 through 10.1.7 could allow a remote user to inject arbitrary data iwhich could cause the serivce to crash due to excess resource consumption. IBM X-Force ID: 193659.

IBM Spectrum Protect Operations Center 7.1 and 8.1 is vulnerable to a denial of service, caused by a RPC that allows certain cache values to be set and dumped to a file. By setting a grossly large cache value and dumping that cached value to a file multiple times, a remote attacker could exploit this vulnerability to cause the consumption of all memory resources. IBM X-Force ID: 192156.

IBM MQ Internet Pass-Thru 2.1 and 9.2 could allow a remote user to cause a denial of service by sending malformed MQ data requests which would consume all available resources. IBM X-Force ID: 188093.

IBM Cognos Analytics 11.0, and 11.1 is vulnerable to a denial of service attack that could allow a remote user to send specially crafted requests that would consume all available CPU and memory resources. IBM X-Force ID: 158973.

IBM WebSphere Application Server Admin Console 7.5, 8.0, 8.5, and 9.0 is vulnerable to a potential denial of service, caused by improper parameter parsing. A remote attacker could exploit this to consume all available CPU resources. IBM X-Force ID: 157380.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a denial of service, caused by improper handling of request headers. A remote attacker could exploit this vulnerability to cause the consumption of Memory. IBM X-Force ID: 156242.

IBM Security Access Manager Container (IBM Security Verify Access Appliance 10.0.0.0 through 10.0.6.1 and IBM Security Verify Access Docker 10.0.0.0 through 10.0.6.1) is vulnerable to a denial of service attacks on the DSC server. IBM X-Force ID: 254776.

IBM Security Access Manager Container (IBM Security Verify Access Appliance 10.0.0.0 through 10.0.6.1 and IBM Security Verify Access Docker 10.0.0.0 through 10.0.6.1) could allow an attacker to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 254651.

IBM Spectrum Protect 7.1 and 8.1 dsmc and dsmcad processes incorrectly accumulate TCP/IP sockets in a CLOSE_WAIT state. This can cause TCP/IP resource leakage and may result in a denial of service. IBM X-Force ID: 148871.

IBM Security Verify Access OIDC Provider could allow a remote user to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 238921.

IBM Sterling Partner Engagement Manager 6.1.2, 6.2.0, and 6.2.1 could allow an authenticated user to exhaust server resources which could lead to a denial of service. IBM X-Force ID: 229705.

An unprivileged attacker with connectivity to the IMM2 could cause a denial of service attack on the IMM2 (Versions earlier than 4.4 for Lenovo System x and earlier than 6.4 for IBM System x). Flooding the IMM2 with a high volume of authentication failures via the Common Information Model (CIM) used by LXCA and OneCLI and other tools can exhaust available system memory which can cause the IMM2 to reboot itself until the requests cease.

IBM Tivoli Monitoring 6.2.3 through 6.2.3.5 and 6.3.0 through 6.3.0.7 are vulnerable to both TEPS user privilege escalation and possible denial of service due to unconstrained memory growth. IBM X-Force ID: 137039.

The IBM Integration Bus for z/OS 10.1 through 10.1.0.2 AdminAPI is vulnerable to a denial of service due to file system exhaustion. IBM X-Force ID: 279972.

IBM Common Cryptographic Architecture (CCA) 7.0.0 through 7.5.36 could allow a remote user to cause a denial of service due to incorrect data handling for certain types of AES operations. IBM X-Force ID: 270602.

An Uncontrolled Resource Consumption vulnerability in Juniper Networks Junos OS on EX2300, EX3400 and EX4300 Series platforms allows an adjacent attacker sending a stream of layer 2 frames will trigger an Aggregated Ethernet (AE) interface to go down and thereby causing a Denial of Service (DoS). By continuously sending a stream of specific layer 2 frames an attacker will sustain the Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS EX4300 Series All versions prior to 15.1R7-S7; 16.1 versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S2, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Juniper Networks Junos OS EX3400 and EX4300-MP Series All versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S9, 18.4R3-S7; 19.1 versions prior to 19.1R2-S3, 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3; 20.3 versions prior to 20.3R2. Juniper Networks Junos OS EX2300 Series All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R2.

A vulnerability in the parsing of ethernet frames in AOS-8 Instant and AOS 10 could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to potentially disrupt network services and require manual intervention to restore functionality.

Weak validation logic within device dissociation API routines allows a remote entity to forcefully unbind unrelated user endpoints, causing severe denial of service.

A Denial of Service (DoS) vulnerability in the processing of a flood of specific ARP traffic in Juniper Networks Junos OS on the EX4300 switch, sent from the local broadcast domain, may allow an unauthenticated network-adjacent attacker to trigger a PFEMAN watchdog timeout, causing the Packet Forwarding Engine (PFE) to crash and restart. After the restart, transit traffic will be temporarily interrupted until the PFE is reprogrammed. In a virtual chassis (VC), the impacted Flexible PIC Concentrator (FPC) may split from the VC temporarily, and join back into the VC once the PFE restarts. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on the EX4300: All versions prior to 15.1R7-S12; 18.4 versions prior to 18.4R2-S10, 18.4R3-S11; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R1-S9, 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2-S1, 21.2R3; 21.3 versions prior to 21.3R1-S2, 21.3R2.

An Uncontrolled Resource Consumption vulnerability in the handling of IPv6 neighbor state change events in Juniper Networks Junos OS allows an adjacent attacker to cause a memory leak in the Flexible PIC Concentrator (FPC) of an ACX5448 router. The continuous flapping of an IPv6 neighbor with specific timing will cause the FPC to run out of resources, leading to a Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition, requiring a manual PFE restart to restore service. The following error messages will be seen after the FPC resources have been exhausted: fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 This issue only affects the ACX5448 router. No other products or platforms are affected by this vulnerability. This issue affects Juniper Networks Junos OS on ACX5448: 18.4 versions prior to 18.4R3-S10; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R1-S8, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.

A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticated, adjacent attacker to cause a DoS condition of an affected device. This vulnerability is due to missing length validation of certain Cisco Discovery Protocol packet header fields. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust available memory and cause the service to restart. Cisco has released firmware updates that address this vulnerability.