A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Versions of INEA ME RTU firmware 3.36b and prior are vulnerable to operating system (OS) command injection, which could allow remote code execution.

Remote code execution (RCE) vulnerability in Brocade Fabric OS after v9.0 and before v9.2.0 could allow an attacker to execute arbitrary code and use this to gain root access to the Brocade switch.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted http get request parameters.

The pdfinfojs NPM module versions <= 0.3.6 has a command injection vulnerability that allows an attacker to execute arbitrary commands on the victim's machine.

D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at genacgi_main.

An unauthorized command injection vulnerability exists in the ActionLogin function of the webman.lua file in Ikuai router OS through 3.7.1.

A command injection in git-dummy-commit v1.3.0 allows os level commands to be executed due to an unescaped parameter.

A command injection vulnerability in the wsConvertPpt component of Chamilo v1.11.* up to v1.11.18 allows attackers to execute arbitrary commands via a SOAP API call with a crafted PowerPoint name.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet allows attacker to execute unauthorized code or commands via crafted API requests.

Command injection exists in pdf-image v2.0.0 due to an unescaped string parameter.

A shell-injection vulnerability in email notifications on Supermicro motherboards (such as H12DST-B before 03.10.35) allows remote attackers to inject execute arbitrary commands as root on the BMC.

Connected IO v2.1.0 and prior has a command as part of its communication protocol allowing the management platform to specify arbitrary OS commands for devices to execute. Attackers abusing this dangerous functionality may issue all devices OS commands to execute, resulting in arbitrary remote command execution.

The `Release PR Merged` workflow in the github repo taosdata/grafanaplugin is subject to a command injection vulnerability which allows for arbitrary code execution within the github action context due to the insecure usage of `${{ github.event.pull_request.title }}` in a bash command within the GitHub workflow. Attackers can inject malicious commands which will be executed by the workflow. This happens because `${{ github.event.pull_request.title }}` is directly passed to bash command on like 25 of the workflow. This may allow an attacker to gain access to secrets which the github action has access to or to otherwise make use of the compute resources.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A weakness has been identified in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this vulnerability is an unknown functionality of the file /htdocs/api/playlist/shuffle.php. Executing manipulation of the argument playlist can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in DTS Monitoring 3.57.0. The parameter port within the SSL Certificate check function is vulnerable to OS command injection (blind).

An issue was discovered in DTS Monitoring 3.57.0. The parameter ip within the Ping check function is vulnerable to OS command injection (blind).

active-support ruby gem 5.2.0 could allow a remote attacker to execute arbitrary code on the system, caused by containing a malicious backdoor. An attacker could exploit this vulnerability to execute arbitrary code on the system.

An issue was discovered in DTS Monitoring 3.57.0. The parameter options within the WGET check function is vulnerable to OS command injection (blind).

A vulnerability was determined in Wavlink WL-WN578W2 221110. This affects the function sub_401C5C of the file firewall.cgi. This manipulation of the argument pingFrmWANFilterEnabled/blockSynFloodEnabled/blockPortScanEnabled/remoteManagementEnabled causes command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection in `/main/webservices/additional_webservices.php` in Chamilo LMS <= v1.11.20 allows unauthenticated attackers to obtain remote code execution via improper neutralisation of special characters. This is a bypass of CVE-2023-34960.

There is a command injection vulnerability in the Netgear R6250 router with Firmware Version 1.0.4.48. If an attacker gains web management privileges, they can inject commands into the post request parameters, thereby gaining shell privileges.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D6400 before 1.0.0.78, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6250 before 1.0.4.8, R6300v2 before 1.0.4.6, R6400 before 1.0.1.12, R6700 before 1.0.1.16, R7000 before 1.0.7.10, R7100LG before 1.0.0.42, R7300DST before 1.0.0.44, R7900 before 1.0.1.12, R8000 before 1.0.3.36, R8300 before 1.0.2.74, R8500 before 1.0.2.74, WNDR3400v3 before 1.0.1.14, and WNR3500Lv2 before 1.2.0.48.

A vulnerability was found in ImageMagick. This security flaw cause a remote code execution vulnerability in OpenBlob with --enable-pipes configured.

The pullit package before 1.4.0 for Node.js allows OS Command Injection because eval is used on an attacker-supplied Git branch name.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_10F2C. This vulnerability is triggered via a crafted packet.

A deserialization vulnerability in the License Servlet of Fortra's GoAnywhere MFT allows an actor with a validly forged license response signature to deserialize an arbitrary actor-controlled object, possibly leading to command injection.

Multiple D-Link DIR-series routers, including DIR-110, DIR-412, DIR-600, DIR-610, DIR-615, DIR-645, and DIR-815 firmware version 1.03, contain a vulnerability in the service.cgi endpoint that allows remote attackers to execute arbitrary system commands without authentication. The flaw stems from improper input handling in the EVENT=CHECKFW parameter, which is passed directly to the system shell without sanitization. A crafted HTTP POST request can inject commands that are executed with root privileges, resulting in full device compromise. These router models are no longer supported at the time of assignment and affected version ranges may vary. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-08-21 UTC.

D-Link DNS-343 ShareCenter devices running firmware versions up to and including 1.05 contain a command injection vulnerability in the Mail Test functionality. The web maintenance script posts to the internal goForm endpoint '/goform/Mail_Test' and uses several form parameters directly in a call to a system email utility without proper input validation. An unauthenticated remote attacker can supply crafted form data that injects shell commands, resulting in execution as root on the device. NOTE: The DNS-343 product line has been declared end-of-life.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component ipsec_secrets. This vulnerability is triggered via a crafted packet.

A vulnerability was determined in D-Link DIR-823X up to 250416. Affected by this vulnerability is the function sub_415028 of the file /goform/set_static_leases. Executing manipulation of the argument Hostname can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109.

D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string.

LibreNMS 1.46 allows remote attackers to execute arbitrary OS commands by using the $_POST['community'] parameter to html/pages/addhost.inc.php during creation of a new device, and then making a /ajax_output.php?id=capture&format=text&type=snmpwalk&hostname=localhost request that triggers html/includes/output/capture.inc.php command mishandling.

In the /HNAP1/SetQoSSettings message, the uplink parameter is vulnerable, and the vulnerability affects D-Link DIR-822 Rev.B 202KRb06 and DIR-822 Rev.C 3.10B06 devices. In the SetQoSSettings.php source code, the uplink parameter is saved in the /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth internal configuration memory without any regex checking. And in the bwc_tc_spq_start, bwc_tc_wfq_start, and bwc_tc_adb_start functions of the bwcsvcs.php source code, the data in /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth is used with the tc command without any regex checking. A vulnerable /HNAP1/SetQoSSettings XML message could have shell metacharacters in the uplink element such as the `telnetd` string.

In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string.

All versions of yongyou PLM are affected by a command injection issue. UFIDA PLM (Product Life Cycle Management) is a strategic management method. It applies a series of enterprise application systems to support the entire process from conceptual design to the end of product life, and the collaborative creation, distribution, application and management of product information across organizations. Yonyou PLM uses jboss by default, and you can access the management control background without authorization An attacker can use this vulnerability to gain server permissions.

An issue was discovered in ASUSWRT 3.0.0.4.384.20308. When processing the /start_apply.htm POST data, there is a command injection issue via shell metacharacters in the fb_email parameter. By using this issue, an attacker can control the router and get shell.

D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a command injection vulnerability via the ST parameter in the lxmldbc_system() function.

If exploited, this command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Music Station versions prior to 5.1.13; versions prior to 5.2.9; versions prior to 5.3.11.

The web interface on FASTGate Fastweb devices with firmware through 0.00.47_FW_200_Askey 2017-05-17 (software through 1.0.1b) exposed a CGI binary that is vulnerable to a command injection vulnerability that can be exploited to achieve remote code execution with root privileges. No authentication is required in order to trigger the vulnerability.

An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. The login form passes user input directly to a shell command without any kind of escaping or validation in /usr/share/www/check.lp file. An attacker is able to perform command injection using the "password" parameter in the login form.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component get_cgi_from_memory. This vulnerability is triggered via a crafted packet.

Synway SMG Gateway Management Software contains an OS command injection vulnerability in the RADIUS configuration endpoint at /en/9-2radius.php where the radius_address POST parameter is split and interpolated directly into a sed command without sanitization. An unauthenticated remote attacker can inject arbitrary shell commands by submitting a POST request with crafted radius_address, radius_address2, shared_secret2, source_ip, timeout, or retry parameters along with save=1 and enable_radius=1 to achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-11 (UTC).

In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.