SEPPmail Secure Email Gateway before version 15.0.3 allows an attacker to forge a GINA-encrypted email.
SEPPmail Secure Email Gateway before version 15.0.3 allows an attacker to cause attacker-controlled certificates to be used for future encryption to a victim by adding the certificates to S/MIME signatures.
IBM Maximo Application Suite 9.1, 9.0, 8.11, and 8.10 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic.
IBM Aspera Shares 1.9.9 through 1.11.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information
A vulnerability in the configuration backup feature of Cisco Nexus Dashboard could allow an attacker who has the encryption password and access to Full or Config-only backup files to access sensitive information. This vulnerability exists because authentication details are included in the encrypted backup files. An attacker with a valid backup file and encryption password from an affected device could decrypt the backup file. The attacker could then use the authentication details in the backup file to access internal-only APIs on the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.
A vulnerability was identified in Juju from version 3.2.0 until 3.6.19 and from version 4.0 until 4.0.4, where the internal Dqlite database cluster fails to perform proper TLS client and server authentication. Specifically, the Juju controller's database endpoint does not validate client certificates when a new node attempts to join the cluster. An unauthenticated attacker with network reachability to the Juju controller's Dqlite port can exploit this flaw to join the database cluster. Once joined, the attacker gains full read and write access to the underlying database, allowing for total data compromise.
Mbed TLS v3.3.0 up to 3.6.5 and 4.0.0 allows Algorithm Downgrade.
Trino is a distributed SQL query engine for big data analytics. From version 439 to before version 480, Iceberg connector REST catalog static credentials (access key) or vended credentials (temporary access key) are accessible to users that have write privilege on SQL level. This issue has been patched in version 480.
cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Prior to version 46.0.6, DNS name constraints were only validated against SANs within child certificates, and not the "peer name" presented during each validation. Consequently, cryptography would allow a peer named bar.example.com to validate against a wildcard leaf certificate for *.example.com, even if the leaf's parent certificate (or upwards) contained an excluded subtree constraint for bar.example.com. This issue has been patched in version 46.0.6.
The PaperCut NG/MF (specifically, the embedded application for Konica Minolta devices) is vulnerable to session hijacking. The PaperCut NG/MF Embedded application is a software interface that runs directly on the touch screen of a multi-function device. It was internally discovered that the communication channel between the embedded application and the server was insecure, which could leak data including sensitive information that may be used to mount an attack on the device. Such an attack could potentially be used to steal data or to perform a phishing attack on the end user.
Improper Certificate Validation vulnerability in Apache Airflow Provider for Databricks. Provider code did not validate certificates for connections to Databricks back-end which could result in a man-of-a-middle attack that traffic is intercepted and manipulated or credentials exfiltrated w/o notice. This issue affects Apache Airflow Provider for Databricks: from 1.10.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which fixes the issue.
Botan is a C++ cryptography library. Prior to version 3.11.0, during processing of an X.509 certificate path using name constraints which restrict the set of allowable DNS names, if no subject alternative name is defined in the end-entity certificate Botan would check that the CN was allowed by the DNS name constraints, even though this check is technically not required by RFC 5280. However this check failed to account for the possibility of a mixed-case CN. Thus a certificate with CN=Sub.EVIL.COM and no subject alternative name would bypasses an excludedSubtrees constraint for evil.com because the comparison is case-sensitive. This issue has been patched in version 3.11.0.
Nginx UI is a web user interface for the Nginx web server. Prior to version 2.3.4, the nginx-ui backup restore mechanism allows attackers to tamper with encrypted backup archives and inject malicious configuration during restoration. This issue has been patched in version 2.3.4.
A flaw in V8's string hashing mechanism causes integer-like strings to be hashed to their numeric value, making hash collisions trivially predictable. By crafting a request that causes many such collisions in V8's internal string table, an attacker can significantly degrade performance of the Node.js process. The most common trigger is any endpoint that calls `JSON.parse()` on attacker-controlled input, as JSON parsing automatically internalizes short strings into the affected hash table. This vulnerability affects **20.x, 22.x, 24.x, and 25.x**.
A flaw was found in libsoup. When establishing HTTPS tunnels through a configured HTTP proxy, sensitive session cookies are transmitted in cleartext within the initial HTTP CONNECT request. A network-positioned attacker or a malicious HTTP proxy can intercept these cookies, leading to potential session hijacking or user impersonation.
UniFi Network Controller before version 5.10.22 and 5.11.x before 5.11.18 contains an improper certificate verification vulnerability that allows adjacent network attackers to conduct man-in-the-middle attacks by presenting a false SSL certificate during SMTP connections. Attackers can intercept SMTP traffic and obtain credentials by exploiting the insecure SSL host verification mechanism in the SMTP certificate validation process.
Happy DOM is a JavaScript implementation of a web browser without its graphical user interface. Versions prior to 20.8.9 may attach cookies from the current page origin (`window.location`) instead of the request target URL when `fetch(..., { credentials: "include" })` is used. This can leak cookies from origin A to destination B. Version 20.8.9 fixes the issue.
Ubiquiti UniFi Network Controller prior to 5.10.12 (excluding 5.6.42), UAP FW prior to 4.0.6, UAP-AC, UAP-AC v2, and UAP-AC Outdoor FW prior to 3.8.17, USW FW prior to 4.0.6, USG FW prior to 4.4.34 uses AES-CBC encryption for device-to-controller communication, which contains cryptographic weaknesses that allow attackers to recover encryption keys from captured traffic. Attackers with adjacent network access can capture sufficient encrypted traffic and exploit AES-CBC mode vulnerabilities to derive the encryption keys, enabling unauthorized control and management of network devices.
Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, `pki.verifyCertificateChain()` does not enforce RFC 5280 basicConstraints requirements when an intermediate certificate lacks both the `basicConstraints` and `keyUsage` extensions. This allows any leaf certificate (without these extensions) to act as a CA and sign other certificates, which node-forge will accept as valid. Version 1.4.0 patches the issue.
Wazuh provisioning scripts and Dockerfiles contain an insecure transport vulnerability where curl is invoked with the -k/--insecure flag, disabling SSL/TLS certificate validation. Attackers with network access can perform man-in-the-middle attacks to intercept and modify downloaded dependencies or code during the build process, leading to remote code execution and supply chain compromise.
WWBN AVideo is an open source video platform. In versions up to and including 26.0, AVideo allows content owners to password-protect individual videos. The video password is stored in the database in plaintext — no hashing, salting, or encryption is applied. If an attacker gains read access to the database (via SQL injection, a database backup, or misconfigured access controls), they obtain all video passwords in cleartext. Commit f2d68d2adbf73588ea61be2b781d93120a819e36 contains a patch.
When using public dashboards and direct data-sources, all direct data-sources' passwords are exposed despite not being used in dashboards. No passwords of proxied data-sources are exposed. We encourage all direct data-sources to be converted to proxied data-sources as far as possible to improve your deployments' security.
Incus is a system container and virtual machine manager. Prior to version 6.23.0, a lack of validation of the image fingerprint when downloading from simplestreams image servers opens the door to image cache poisoning and under very narrow circumstances exposes other tenants to running attacker controlled images rather than the expected one. Version 6.23.0 patches the issue.
A vulnerability in Grafana Tempo exposes the S3 SSE-C encryption key in plaintext through the /status/config endpoint, potentially allowing unauthorized users to obtain the key used to encrypt trace data stored in S3. Thanks to william_goodfellow for reporting this vulnerability.
The vulnerability affecting TL-WR850N v3 allows cleartext storage of administrative and Wi-Fi credentials in a region of the device’s flash memory while the serial interface remains enabled and protected by weak authentication. An attacker with physical access and the ability to connect to the serial port can recover sensitive information, including the router’s management password and wireless network key. Successful exploitation can lead to full administrative control of the device and unauthorized access to the associated wireless network.
IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 is vulnerable to exposure of sensitive information via JSON server response manipulation.
IBM Concert 1.0.0 through 2.2.0 transmits data in clear text that could allow an attacker to obtain sensitive information using man in the middle techniques.
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, when using mTLS for client identity, with `verify_and_map` to derive a NATS identity from the client certificate's Subject DN, certain patterns of RDN would not be correctly enforced, allowing for authentication bypass. This does require a valid certificate from a CA already trusted for client certificates, and `DN` naming patterns which the NATS maintainers consider highly unlikely. So this is an unlikely attack. Nonetheless, administrators who have been very sophisticated in their `DN` construction patterns might conceivably be impacted. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, developers should review their CA issuing practices.
A vulnerability in Cisco IOS XE Software for Cisco Meraki could allow a remote, unauthenticated attacker to view confidential device information. This vulnerability is due to a device configuration upload being performed over an insecure tunnel. An attacker could exploit this vulnerability by conducting an on-path attack between the affected device and the Cisco Meraki Dashboard. A successful exploit could allow the attacker to view sensitive device configuration information.
Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. Prior to version 0.13.0, code for client certificate verification did not check the key purpose as set in the Extended Key Usage extension. An attacker with access to the private key for a valid certificate issued by a CA trusted for TLS client authentication but designated for a different purpose could have used that certificate to improperly access resources requiring TLS client authentication. Server configurations that do not use client certificates (`GnuTLSClientVerify ignore`, the default) are not affected. The problem has been fixed in version 0.13.0 by rewriting certificate verification to use `gnutls_certificate_verify_peers()`, and requiring key purpose id-kp-clientAuth (also known as `tls_www_client` in GnuTLS) by default if the Extended Key Usage extension is present. The new `GnuTLSClientKeyPurpose` option allows overriding the expected key purpose if needed (please see the manual for details). Behavior for certificates without an Extended Key Usage extension is unchanged. If dedicated (sub-)CAs are used for issuing TLS client certificates only (not for any other purposes) the issue has no practical impact.
WWBN AVideo is an open source video platform. In versions up to and including 26.0, the API plugin exposes a `decryptString` action without any authentication. Anyone can submit ciphertext and receive plaintext. Ciphertext is issued publicly (e.g., `view/url2Embed.json.php`), so any user can recover protected tokens/metadata. Commit 3fdeecef37bb88967a02ccc9b9acc8da95de1c13 contains a patch.
WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `createKeys()` function in the LoginControl plugin's PGP 2FA system generates 512-bit RSA keys, which have been publicly factorable since 1999. An attacker who obtains a target user's public key can factor the 512-bit RSA modulus on commodity hardware in hours, derive the complete private key, and decrypt any PGP 2FA challenge issued by the system — completely bypassing the second authentication factor. Additionally, the `generateKeys.json.php` and `encryptMessage.json.php` endpoints lack any authentication checks, exposing CPU-intensive key generation to anonymous users. Commit 00d979d87f8182095c8150609153a43f834e351e contains a patch.
A vulnerability was found in HybridAuth up to 3.12.2. This issue affects some unknown processing of the file src/HttpClient/Curl.php of the component SSL Handler. The manipulation of the argument curlOptions results in improper certificate validation. The attack can be launched remotely. This attack is characterized by high complexity. The exploitability is assessed as difficult. The project was informed of the problem early through an issue report but has not responded yet.
Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 uses the ecos_pw cookie for authentication, which contains Base64-encoded credential data combined with a static suffix. Because the encoding is reversible and lacks integrity protection, an attacker can reconstruct or forge a valid cookie value without proper authentication. This allows unauthorized administrative access to protected endpoints.
A flaw has been found in Shenzhen HCC Technology MPOS M6 PLUS 1V.31-N. This affects an unknown part of the component Cardholder Data Handler. Executing a manipulation can lead to cleartext transmission of sensitive information. The attack requires access to the local network. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The vendor was contacted early about this disclosure but did not respond in any way.
Versions of the package jsrsasign before 11.1.1 are vulnerable to Missing Cryptographic Step via the KJUR.crypto.DSA.signWithMessageHash process in the DSA signing implementation. An attacker can recover the private key by forcing r or s to be zero, so the library emits an invalid signature without retrying, and then solves for x from the resulting signature.
Service information is not encrypted when transmitted as BACnet packets over the wire, and can be sniffed, intercepted, and modified by an attacker. Valuable information such as the File Start Position and File Data can be sniffed from network traffic using Wireshark's BACnet dissector filter. The proprietary format used by WebCTRL to receive updates from the PLC can also be sniffed and reverse engineered.
Cryptomator encrypts data being stored on cloud infrastructure. Prior to version 1.19.1, the Hub-based unlock flow explicitly supports hub+http and consumes Hub endpoints from vault metadata without enforcing HTTPS. As a result, a vault configuration can drive OAuth and key-loading traffic over plaintext HTTP or other insecure endpoint combinations. An active network attacker can tamper with or observe this traffic. Even when the vault key is encrypted for the device, bearer tokens and endpoint-level trust decisions are still exposed to downgrade and interception. This issue has been patched in version 1.19.1.
Improper certificate validation in the PAM propagation WinRM connections allows a network attacker to perform a man-in-the-middle attack via disabled TLS certificate verification.
Anchorr is a Discord bot for requesting movies and TV shows and receiving notifications when items are added to a media server. Versions 1.4.1 and below contain a stored XSS vulnerability in the Jellyseerr user selector. Jellyseerr allows any account holder to execute arbitrary JavaScript in the Anchorr admin's browser session. The injected script calls the authenticated /api/config endpoint - which returns the full application configuration in plaintext. This allows the attacker to forge a valid Anchorr session token and gain full admin access to the dashboard with no knowledge of the admin password. The same response also exposes the API keys and tokens for every integrated service, resulting in simultaneous account takeover of the Jellyfin media server (via JELLYFIN_API_KEY), the Jellyseerr request manager (via JELLYSEERR_API_KEY), and the Discord bot (via DISCORD_TOKEN). This issue has been fixed in version 1.4.2.
Step CA is an online certificate authority for secure, automated certificate management for DevOps. Versions 0.30.0-rc6 and below do not safeguard against unauthenticated certificate issuance through the SCEP UpdateReq. This issue has been fixed in version 0.30.0.
Improper certificate validation in Devolutions Hub Reporting Service 2025.3.1.1 and earlier allows a network attacker to perform a man-in-the-middle attack via disabled TLS certificate verification.
Jenkins LoadNinja Plugin 2.1 and earlier stores LoadNinja API keys unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.
Edimax GS-5008PL firmware version 1.00.54 and prior use cleartext HTTP for the web management interface without implementing TLS or SSL encryption. Attackers on the same network can intercept management traffic to capture administrator credentials and sensitive configuration data.
Edimax GS-5008PL firmware version 1.00.54 and prior contain an insecure credential storage vulnerability that allows attackers to obtain administrator credentials by accessing configuration backup files. Attackers can download the config.bin file through fupload.cgi to extract plaintext username and password fields for unauthorized administrative access.
The GL-iNet Comet (GL-RM1) KVM connects to a GL-iNet site during boot-up to provision client and CA certificates. The GL-RM1 does not verify certificates used for this connection, allowing an attacker-in-the-middle to serve invalid client and CA certificates. The GL-RM1 will attempt to use the invalid certificates and fail to connect to the legitimate GL-iNet KVM cloud service.
All versions of the package sjcl are vulnerable to Improper Verification of Cryptographic Signature due to missing point-on-curve validation in sjcl.ecc.basicKey.publicKey(). An attacker can recover a victim's ECDH private key by sending crafted off-curve public keys and observing ECDH outputs. The dhJavaEc() function directly returns the raw x-coordinate of the scalar multiplication result (no hashing), providing a plaintext oracle without requiring any decryption feedback.
Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.9, a cryptographic padding oracle vulnerability was identified in the Authlib Python library concerning the implementation of the JSON Web Encryption (JWE) RSA1_5 key management algorithm. Authlib registers RSA1_5 in its default algorithm registry without requiring explicit opt-in, and actively destroys the constant-time Bleichenbacher mitigation that the underlying cryptography library implements correctly. This issue has been patched in version 1.6.9.
Use of a broken or risky cryptographic algorithm in Smart Switch prior to version 3.7.69.15 allows remote attackers to configure a downgraded scheme for authentication.
cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.37.2, when a cpp-httplib client is configured with a proxy and set_follow_location(true), any HTTPS redirect it follows will have TLS certificate and hostname verification silently disabled on the new connection. The client will accept any certificate presented by the redirect target — expired, self-signed, or forged — without raising an error or notifying the application. A network attacker in a position to return a redirect response can fully intercept the follow-up HTTPS connection, including any credentials or session tokens in flight. This vulnerability is fixed in 0.37.2.
JumpServer is an open source bastion host and an operation and maintenance security audit system. Prior to v4.10.16-lts, JumpServer improperly validates certificates in the Custom SMS API Client. When JumpServer sends MFA/OTP codes via Custom SMS API, an attacker can intercept the request and capture the verification code BEFORE it reaches the user's phone. This vulnerability is fixed in v4.10.16-lts.