A memory disclosure vulnerability exists in libcoap's OSCORE configuration parser in libcoap before release-4.3.5-patches. An out-of-bounds read may occur when parsing certain configuration values, allowing an attacker to infer or read memory beyond string boundaries in the .rodata section. This could potentially lead to information disclosure or denial of service.

Tenda AX3 v16.03.12.11 contains a stack overflow in formSetIptv via the iptvType parameter, which can cause memory corruption and enable remote code execution (RCE).

A weakness has been identified in H3C Magic B1 up to 100R004. The affected element is the function sub_44de0 of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formP2PLimitConfig. Such manipulation of the argument except leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UGREEN DH2100+ up to 5.3.0.251125. This affects the function handler_file_backup_create of the file /v1/file/backup/create of the component nas_svr. Executing a manipulation of the argument path can lead to buffer overflow. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. It is recommended to upgrade the affected component.

A flaw has been found in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formArpBindConfig. Executing manipulation of the argument pools can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/websHostFilter. Performing manipulation of the argument addHostFilter results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Impacted is the function strcpy of the file /goform/formConfigDnsFilterGlobal. Such manipulation of the argument timeRangeName leads to buffer overflow. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function RE2000v2Repeater_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function RE2000v2Repeater_get_wireless_clientlist_setClientsName of the file mod_form.so. Executing manipulation of the argument clientsname_0 can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function AP_get_wireless_clientlist_setClientsName of the file mod_form.so. Performing manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

BACnet Protocol Stack library provides a BACnet application layer, network layer and media access (MAC) layer communications services. Prior to 1.5.0.rc2, The npdu_is_expected_reply function in src/bacnet/npdu.c indexes request_pdu[offset+2/3/5] and reply_pdu[offset+1/2/4] without verifying that those APDU bytes exist. bacnet_npdu_decode() can return offset == 2 for a 2-byte NPDU, so tiny PDUs pass the version check and then get read out of bounds. On ASan/MPU/strict builds this is an immediate crash (DoS). On unprotected builds it is undefined behavior and can mis-route replies; RCE is unlikely because only reads occur, but DoS is reliable.

Flexsense DiskBoss 7.7.14 contains a local buffer overflow vulnerability in the 'Input Directory' component that allows unauthenticated attackers to execute arbitrary code on the system. Attackers can exploit this by pasting a specially crafted directory path into the 'Add Input Directory' field.

Flexsense DiskBoss 7.7.14 contains a local buffer overflow vulnerability in the 'Reports and Data Directory' field that allows an attacker to execute arbitrary code on the system.

A flaw was found in util-linux. This vulnerability allows a heap buffer overread when processing 256-byte usernames, specifically within the `setpwnam()` function, affecting SUID (Set User ID) login-utils utilities writing to the password database.

Taiko Alethia is an Ethereum-equivalent, permissionless, based rollup designed to scale Ethereum without compromising its fundamental properties. In 2.3.1 and earlier, TaikoInbox._verifyBatches (packages/protocol/contracts/layer1/based/TaikoInbox.sol:627-678) advanced the local tid to whatever transition matched the current blockHash before knowing whether that batch would actually be verified. When the loop later broke (e.g., cooldown window not yet passed or transition invalidated), the function still wrote that newer tid into batches[lastVerifiedBatchId].verifiedTransitionId after decrementing batchId. Result: the last verified batch could end up pointing at a transition index from the next batch (often zeroed), corrupting the verified chain pointer.

A stack-based buffer overflow vulnerability [CWE-121] in WatchGuard Fireware OS's certificate request command could allow an authenticated privileged user to execute arbitrary code via specially crafted CLI commands.This issue affects Fireware OS: from 12.0 through 12.5.12+701324, from 12.6 through 12.11.2.

A weakness has been identified in H3C Magic B0 up to 100R002. This impacts the function EditWlanMacList of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.52, an out-of-bounds read vulnerability in libpng's simplified API allows reading up to 1012 bytes beyond the png_sRGB_base[512] array when processing valid palette PNG images with partial transparency and gamma correction. The PNG files that trigger this vulnerability are valid per the PNG specification; the bug is in libpng's internal state management. Upgrade to libpng 1.6.52 or later.

An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 1580, 2500, W920, W930, W1000, Modem 5123, Modem 5300, and Modem 5400. The function used to decode the SOR transparent container lacks bounds checking, which can cause a fatal error.

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, when AVRCP is enabled on ESP32, receiving a malformed VENDOR DEPENDENT command from a peer device can cause the Bluetooth stack to access memory before validating the command buffer length. This may lead to an out-of-bounds read, potentially exposing unintended memory content or causing unexpected behavior.

An out-of-bounds read vulnerability exists in the EMF functionality of PDF-XChange Co. Ltd PDF-XChange Editor 10.7.3.401. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.

Out-of-bounds read vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. The 'DownloadFile' function converts a parameter to an integer using 'atoi()' and then uses it as an index in the 'FilesDownload' array with '(&FilesDownload)[iVar2]'. If the parameter is too large, it will access memory beyond the limits.

Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. In the 'SetUserPassword()' function, the 'newPassword' parameter is directly embedded in a shell command string using 'sprintf()' without any sanitisation or validation, and then executed using 'system()'. This allows an attacker to inject arbitrary shell commands that will be executed with the same privileges as the application.

Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. In the 'ShowMeterPasswords()' function, there is an unlimited user input that is copied to a fixed-size buffer via 'sprintf()'. The 'GetParameter(meter)' function retrieves the user input, which is directly incorporated into a buffer without size validation. An attacker can provide an excessively large input for the 'meter' parameter.

Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. In the 'ShowMeterDatabase()' function, there is an unlimited user input that is copied to a fixed-size buffer via 'sprintf()'. The 'GetParameter(meter)' function retrieves the user input, which is directly incorporated into a buffer without size validation. An attacker can provide an excessively large input for the 'meter' parameter.

Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. The vulnerability is found in the 'AddEvent()' function when copying the user-controlled username input to a fixed-size buffer (48 bytes) without boundary checking. This can lead to memory corruption, resulting in possible remote code execution.

Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. The 'ShowDownload()' function uses “sprintf()” to format a string that includes the user-controlled input of 'GetParameter(meter)' in the fixed-size buffer 'acStack_4c' (64 bytes) without checking the length. An attacker can provide an excessively long value for the 'meter' parameter that exceeds the 64-byte buffer size.

Stack-based buffer overflow vulnerability in CircutorSGE-PLC1000/SGE-PLC50 v9.0.2. The 'SetLan' function is invoked when a new configuration is applied. This new configuration function is activated by a management web request, which can be invoked by a user when making changes to the 'index.cgi' web application. The parameters are not being sanitised, which could lead to command injection.

In display, there is a possible out of bounds read due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10184297; Issue ID: MSV-4759.

In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10196993; Issue ID: MSV-4804.

In display, there is a possible out of bounds read due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10196993; Issue ID: MSV-4805.

In Modem, there is a possible out of bounds read due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01673760; Issue ID: MSV-4650.

Out-of-bounds read in libimagecodec.quram.so prior to SMR Dec-2025 Release 1 allows remote attackers to access out-of-bounds memory.

Out-of-bounds read vulnerability in bootloader prior to SMR Dec-2025 Release 1 allows physical attackers to access out-of-bounds memory.

Heap-based Buffer Overflow, Out-of-bounds Read vulnerability in Avast Antivirus on MacOS when scanning a malformed file may allow Local Execution of Code or Denial-of-Service of the anitvirus engine process.This issue affects Antivirus: from 8.3.70.94 before 8.3.70.98.

An unauthenticated remote attacker, who beats a race condition, can exploit a flaw in the communication servers of the CODESYS Control runtime system on Linux and QNX to trigger an out-of-bounds read via crafted socket communication, potentially causing a denial of service.

FeehiCMS version 2.1.1 fails to enforce server-side immutability for parameters that are presented to clients as "read-only." An authenticated attacker can intercept and modify the parameter in transit and the backend accepts the changes. This can lead to unintended username changes.

OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to version 2.4.15, a user in the lpadmin group can use the cups web ui to change the config and insert a malicious line. Then the cupsd process which runs as root will parse the new config and cause an out-of-bound write. This issue has been patched in version 2.4.15.

Out-of-bounds memory operations in org.lz4:lz4-java 1.8.0 and earlier allow remote attackers to cause denial of service and read adjacent memory via untrusted compressed input.

Stack-based Buffer Overflow vulnerability in ABB Terra AC wallbox.This issue affects Terra AC wallbox: through 1.8.33.

Vulnerability of accessing invalid memory in the component driver module. Impact: Successful exploitation of this vulnerability will affect availability and confidentiality.

A weakness in Automated Logic and Carrier i-Vu Gen5 router on driver version drv_gen5_106-01-2380, allows malformed packets to be sent through BACnet MS/TP network causing the devices to enter a fault state. This fault state requires a manual power cycle to return the device to network visibility.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, working with large buffers in Lua scripts can lead to a stack overflow. Users of Lua rules and output scripts may be affected when working with large buffers. This includes a rule passing a large buffer to a Lua script. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves disabling Lua rules and output scripts, or making sure limits, such as stream.depth.reassembly and HTTP response body limits (response-body-limit), are set to less than half the stack size.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a stack overflow can occur on large HTTP file transfers if the user has increased the HTTP response body limit and enabled the logging of printable http bodies. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves using default HTTP response body limits and/or disabling http-body-printable logging; body logging is disabled by default.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a stack overflow that causes Suricata to crash can occur if SWF decompression is enabled. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves disabling SWF decompression (swf-decompression in suricata.yaml), it is disabled by default; set decompress-depth to lower than half your stack size if swf-decompression must be enabled.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a large HTTP content type, when logged can cause a stack overflow crashing Suricata. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves limiting stream.reassembly.depth to less then half the stack size. Increasing the process stack size makes it less likely the bug will trigger.

Out-of-bounds Read vulnerability in ASR1903、ASR3901 in ASR Lapwing_Linux on Linux (nr_fw modules). This vulnerability is associated with program files Code/nr_fw/DLP/src/NrCgi.C. This issue affects Lapwing_Linux: before 2025/11/26.

Out-of-bounds read in Application Gateway allows an unauthorized attacker to elevate privileges over a network.

WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to version 2.4.4, an out-of-bounds array access issue exists in WAMR's fast interpreter mode during WASM bytecode loading. When frame_ref_bottom and frame_offset_bottom arrays are at capacity and a GET_GLOBAL(I32) opcode is encountered, frame_ref_bottom is expanded but frame_offset_bottom may not be. If this is immediately followed by an if opcode that triggers preserve_local_for_block, the function traverses arrays using stack_cell_num as the upper bound, causing out-of-bounds access to frame_offset_bottom since it wasn't expanded to match the increased stack_cell_num. This issue has been patched in version 2.4.4.