In JetBrains Toolbox App before 2.6 unencrypted credential transmission during SSH authentication was possible

Arctera/Veritas Data Insight before 7.1.2 can send cleartext credentials when configured to use HTTP Basic Authentication to a Dell Isilon OneFS server.

An issue has been discovered in GitLab CE/EE affecting all versions from 17.9 before 17.9.6, and 17.10 before 17.10.4. The runtime profiling data of a specific service was accessible to unauthenticated users.

Cleartext transmission of sensitive information issue exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, a man-in-the-middle attack may allow a remote unauthenticated attacker to eavesdrop the communication and obtain the authentication information.

SAP Commerce Cloud (Public Cloud) does not allow to disable unencrypted HTTP (port 80) entirely, but instead allows a redirect from port 80 to 443 (HTTPS). As a result, Commerce normally communicates securely over HTTPS. However, the confidentiality and integrity of data sent on the first request before the redirect may be impacted if the client is configured to use HTTP and sends confidential data on the first request before the redirect.

A vulnerability classified as problematic has been found in Consumer Comanda Mobile up to 14.9.3.2/15.0.0.8. This affects an unknown part of the component Restaurant Order Handler. The manipulation of the argument Login/Password leads to cleartext transmission of sensitive information. The attack can only be initiated within the local network. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used.

Exposure of Sensitive System Information Due to Uncleared Debug Information vulnerability in 1clickmigration 1 Click WordPress Migration allows Retrieve Embedded Sensitive Data. This issue affects 1 Click WordPress Migration: from n/a through 2.2.

Debug Messages Revealing Unnecessary Information vulnerability in TLA Media GTM Kit allows Retrieve Embedded Sensitive Data. This issue affects GTM Kit: from n/a through 2.3.1.

A vulnerability was found in Netis WF-2404 1.1.124EN. It has been declared as critical. This vulnerability affects unknown code of the component UART. The manipulation leads to hardware allows activation of test or debug logic at runtime. It is possible to launch the attack on the physical device. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw was found in the Ansible Automation Platform's Event-Driven Ansible. In configurations where verbosity is set to "debug", inventory passwords are exposed in plain text when starting a rulebook activation. This issue exists for any "debug" action in a rulebook and also affects Event Streams.

SaTECH BCU in its firmware version 2.1.3 uses the HTTP protocol. The use of the HTTP protocol for web browsing has the problem that information is exchanged in unencrypted text. Since sensitive data such as credentials are exchanged, an attacker could obtain them and log in legitimately.

A protocol flaw vulnerability exists in the Xiaomi Mi Connect Service APP. The vulnerability is caused by the validation logic is flawed and can be exploited by attackers to leak sensitive user information.

Incorrect Use of Privileged APIs, Cleartext Transmission of Sensitive Information, Insufficiently Protected Credentials vulnerability in Sechard Information Technologies SecHard allows Authentication Bypass, Interface Manipulation, Authentication Abuse, Harvesting Information via API Event Monitoring.This issue affects SecHard: before 3.3.0.20220411.

In phpipam/phpipam version 1.5.1, the Secure attribute for sensitive cookies in HTTPS sessions is not set. This could cause the user agent to send those cookies in plaintext over an HTTP session, potentially exposing sensitive information. The issue is fixed in version 1.7.0.

This issue was addressed by using HTTPS when sending information over the network. This issue is fixed in iOS 18.2 and iPadOS 18.2. A user in a privileged network position may be able to leak sensitive information.

The device uses an unencrypted, proprietary protocol for communication. Through this protocol, configuration data is transmitted and device authentication is performed. An attacker can thereby intercept the authentication hash and use it to log into the device using a pass-the-hash attack.

Bitdefender Box, versions 1.3.11.490 through 1.3.11.505, uses the insecure HTTP protocol to download assets over the Internet to update and restart daemons and detection rules on the devices. Updates can be remotely triggered through the /set_temp_token API method. Then, an unauthenticated and network-adjacent attacker can use man-in-the-middle (MITM) techniques to return malicious responses. Restarted daemons that use malicious assets can then be exploited for remote code execution on the device.

Secure flag not set and SameSIte was set to Lax in the Foreseer Reporting Software (FRS). Absence of this secure flag could lead into the session cookie being transmitted over unencrypted HTTP connections. This security issue has been resolved in the latest version of FRS v1.5.100.

NVIDIA Hopper HGX for 8-GPU contains a vulnerability in the HGX Management Controller (HMC) that may allow a malicious actor with administrative access on the BMC to access the HMC as an administrator. A successful exploit of this vulnerability may lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering.

Lack of encryption in transit for cloud infrastructure facilitating potential for sensitive data manipulation or exposure.

IBM MQ 9.3 LTS, 9.3 CD, 9.4 LTS, and 9.4 CD reveals potentially sensitive information in trace files that could be read by a local user when webconsole trace is enabled.

Bosscomm IF740 Firmware versions:11001.7078 & v11001.0000 and System versions: 6.25 & 6.00 were discovered to send communications to the update API in plaintext, allowing attackers to access sensitive information via a man-in-the-middle attack.

The administrative web interface of a Netgear C7800 Router running firmware version 6.01.07 (and possibly others) authenticates users via basic authentication, with an HTTP header containing a base64 value of the plaintext username and password. Because the web server also does not utilize transport security by default, this renders the administrative credentials vulnerable to eavesdropping by an adversary during every authenticated request made by a client to the router over a WLAN, or a LAN, should the adversary be able to perform a man-in-the-middle attack.

If Brocade Fabric OS before Fabric OS 9.2.0 configuration settings are not set to encrypt SNMP passwords, then the SNMP privsecret / authsecret fields can be exposed in plaintext. The plaintext passwords can be exposed in a configupload capture or a supportsave capture if encryption of passwords is not enabled. An attacker can use these passwords to fetch values of the supported OIDs via SNMPv3 queries. There are also a limited number of MIB objects that can be modified.

Under certain error conditions at time of SANnav installation or upgrade, the encryption key can be written into and obtained from a Brocade SANnav supportsave. An attacker with privileged access to the Brocade SANnav database could use the encryption key to obtain passwords used by Brocade SANnav.

CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists that could result in the exposure of data when network traffic is being sniffed by an attacker.

In Progress® Telerik® Report Server, versions prior to 2025 Q1 (11.0.25.211) when using the older .NET Framework implementation, communication of non-sensitive information between the service agent process and app host process occurs over an unencrypted tunnel, which can be subjected to local network traffic sniffing.

A serial interface can be accessed with physical access to the PCB of Wattsense Bridge devices. After connecting to the interface, access to the bootloader is possible, as well as a Linux login prompt. The bootloader access can be used to gain a root shell on the device. This issue is fixed in recent firmware versions BSP >= 6.4.1.

The JTAG interface of Wattsense Bridge devices can be accessed with physical access to the PCB. After connecting to the interface, full access to the device is possible. This enables an attacker to extract information, modify and debug the device's firmware. All known versions are affected.

Forever KidsWatch Call Me KW-50 R36_YDR_A3PW_GM7S_V1.0_2019_07_15_16.19.24_cob_h suffers from Cleartext Transmission of Sensitive Information due to lack of encryption in device-server communication.

IBM Security Verify Access Appliance and Container 10.0.0 through 10.0.8 transmits sensitive or security-critical data in cleartext in a communication channel that can be sniffed by unauthorized actors.

A vulnerability in HPE Aruba Networking ClearPass Policy Manager may, under certain circumstances, expose sensitive unencrypted information. Exploiting this vulnerability could allow an attacker to perform a man-in-the-middle attack, potentially granting unauthorized access to network resources as well as enabling data tampering.

In DA, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure, if an attacker has physical access to the device, if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: ALPS09291146; Issue ID: MSV-2056.

IBM Security Verify Governance 10.0.2 Identity Manager can transmit user credentials in clear text that could be obtained by an attacker using man in the middle techniques.

A vulnerability has been found in Intelbras InControl up to 2.21.58 and classified as problematic. This vulnerability affects unknown code of the file /v1/usuario/ of the component Registered User Handler. The manipulation leads to cleartext transmission of sensitive information. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 2.21.59 is able to address this issue. It is recommended to upgrade the affected component.

A Credential Exposure Vulnerability exists in the above-mentioned product and version. The vulnerability is due to using HTTP resulting in credentials being sent in clear text.

EWON Flexy 202 transmits user credentials in clear text with no encryption when a user is added, or user credentials are changed via its webpage.

IBM QRadar SIEM 7.5 transmits sensitive or security-critical data in cleartext in a communication channel that could be obtained by an unauthorized actor using man in the middle techniques.

IBM App Connect Enterprise 12.0.1.0 through 12.0.7.0and 13.0.1.0 under certain configurations could allow a privileged user to obtain JMS credentials.

All versions of ETIC Telecom Remote Access Server (RAS) prior to 4.5.0 expose clear text credentials in the web portal. An attacker can access the ETIC RAS web portal and view the HTML code, which is configured to be hidden, thus allowing a connection to the ETIC RAS ssh server, which could enable an attacker to perform actions on the device.

The HI-SCAN 6040i Hitrax HX-03-19-I was discovered to transmit user credentials in cleartext over the GIOP protocol. This allows attackers to possibly gain access to sensitive information via a man-in-the-middle attack.

A privilege escalation vulnerability was discovered that could allow a valid, authenticated LXCA user to escalate their permissions for a connected XCC instance when using LXCA as a Single Sign On (SSO) provider for XCC instances.

HCL MyXalytics is affected by a cleartext transmission of sensitive information vulnerability. The application transmits sensitive or security-critical data in cleartext in a communication channel that can be sniffed by unauthorized actors.

Infoblox BloxOne v2.4 was discovered to contain a business logic flaw due to thick client vulnerabilities.

iXsystems TrueNAS CORE fetch_plugin_packagesites tar Cleartext Transmission of Sensitive Information Vulnerability. This vulnerability allows network-adjacent attackers to tamper with firmware update files on affected installations of iXsystems TrueNAS devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of firmware updates. The issue results from the use of an insecure protocol to deliver updates. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-25668.

IBM Cognos Analytics Mobile for Android 1.1.14 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

A vulnerability was found in Keycloak. The environment option `KC_CACHE_EMBEDDED_MTLS_ENABLED` does not work and the JGroups replication configuration is always used in plain text which can allow an attacker that has access to adjacent networks related to JGroups to read sensitive information.

IBM Security Guardium Key Lifecycle Manager 4.1, 4.1.1, 4.2.0, and 4.2.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

IBM Security Guardium Key Lifecycle Manager 4.1, 4.1.1, 4.2.0, and 4.2.1 could allow a remote attacker to obtain sensitive information in cleartext in a communication channel that can be sniffed by unauthorized actors.

In Splunk Enterprise versions below 9.3.2, 9.2.4, and 9.1.7 and Splunk Cloud Platform versions below 9.3.2408.101, 9.2.2406.106, 9.2.2403.111, and 9.1.2312.206, an SPL command can potentially disclose sensitive information. The vulnerability requires the exploitation of another vulnerability, such as a Risky Commands Bypass, for successful exploitation.

Webservice API endpoints for Assisted Service Module within SAP Commerce Cloud has information disclosure vulnerability. When an authorized agent searches for customer to manage their accounts, the request url includes customer data and it is recorded in server logs. If an attacker impersonating as authorized admin visits such server logs, then they get access to the customer data. The amount of leaked confidential data however is extremely limited, and the attacker has no control over what data is leaked.