BigBlueButton is an open-source virtual classroom. In versions 3.0.21 and below, the official documentation for "Server Customization" on Support for ClamAV as presentation file scanner contains instructions that leave a BBB server vulnerable for Denial of Service. The flawed command exposes both ports (3310 and 7357) to the internet. A remote attacker can use this to send complex or large documents to clamd and waste server resources, or shutdown the clamd process. The clamd documentation explicitly warns about exposing this port. Enabling ufw (ubuntu firewall) during install does not help, because Docker routes container traffic through the nat table, which is not managed or restricted by ufw. Rules installed by ufw in the filter table have no effect on docker traffic. In addition, the provided example also mounts /var/bigbluebutton with write permissions into the container, which should not be required. Future vulnerabilities in clamd may allow attackers to manipulate files in that folder. Users are unaffected unless they have opted in to follow the extra instructions from BigBlueButton's documentation. This issue has been fixed in version 3.0.22.

ERP is a free and open source Enterprise Resource Planning tool. In versions up to 15.98.0 and 16.0.0-rc.1 and through 16.6.0, certain endpoints lacked access validation which allowed for unauthorized document access. This issue has been fixed in versions 15.98.1 and 16.6.1.

Formwork is a flat file-based Content Management System (CMS). In versions 2.0.0 through 2.3.3, the application fails to properly enforce role-based authorization during account creation. Although the system validates that the specified role exists, it does not verify whether the current user has sufficient privileges to assign highly privileged roles such as admin. As a result, an authenticated user with the editor role can create a new account with administrative privileges, leading to full administrative access and complete compromise of the CMS. This issue has been fixed in version 2.3.4.

Sentry is a developer-first error tracking and performance monitoring tool. Versions 21.12.0 through 26.1.0 have a critical vulnerability in its SAML SSO implementation which allows an attacker to take over any user account by using a malicious SAML Identity Provider and another organization on the same Sentry instance. Self-hosted users are only at risk if the following criteria is met: ore than one organizations are configured (SENTRY_SINGLE_ORGANIZATION = True), or malicious user has existing access and permissions to modify SSO settings for another organization in a multo-organization instance. This issue has been fixed in version 26.2.0. To workaround this issue, implement user account-based two-factor authentication to prevent an attacker from being able to complete authentication with a victim's user account. Organization administrators cannot do this on a user's behalf, this requires individual users to ensure 2FA has been enabled for their account.

OpenSift is an AI study tool that sifts through large datasets using semantic search and generative AI. Versions 1.1.2-alpha and below, use non-atomic and insufficiently synchronized local JSON persistence flows, potentially causing concurrent operations to lose updates or corrupt local state across sessions/study/quiz/flashcard/wellness/auth stores. This issue has been fixed in version 1.1.3-alpha.

GetSimple CMS is a content management system. All versions of GetSimple CMS do not implement CSRF protection on the administrative file upload endpoint. As a result, an attacker can craft a malicious web page that silently triggers a file upload request from an authenticated victim’s browser. The request is accepted without requiring a CSRF token or origin validation. This allows an attacker to upload arbitrary files to the application without the victim’s knowledge or consent. In order to exploit this vulnerability, the victim must be authenticated to GetSimple CMS (e.g., admin user), and visit an attacker-controlled webpage. This issue does not have a fix at the time of publication.

Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations. In versions 0.49.0 through 0.50.0, when using a custom Cluster or Clients CA with a multistage CA chain consisting of multiple CAs, Strimzi incorrectly configures the trusted certificates for mTLS authentication on the internal as well as user-configured listeners. All CAs from the CA chain will be trusted. And users with certificates signed by any of the CAs in the chain will be able to authenticate. This issue affects only users using a custom Cluster or Clients CA with a multistage CA chain consisting of multiple CAs. It does not affect users using the Strimzi-managed Cluster and Clients CAs. It also does not affect users using custom Cluster or Clients CA with only a single CA (i.e., no CA chain with multiple CAs). This issue has been fixed in version 0.50.1. To workaround this issue, instead of providing the full CA chain as the custom CA, users can provide only the single CA that should be used.

Chamilo LMS 1.11.8 contains an arbitrary file upload vulnerability that allows authenticated users to upload and execute PHP files through the elfinder filemanager module. Attackers can upload files with image headers in the social myfiles section, rename them to PHP extensions, and execute arbitrary code by accessing the uploaded files.

MLflow Use of Default Password Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of MLflow. Authentication is not required to exploit this vulnerability. The specific flaw exists within the basic_auth.ini file. The file contains hard-coded default credentials. An attacker can leverage this vulnerability to bypass authentication and execute arbitrary code in the context of the administrator. Was ZDI-CAN-28256.

The underlying PLC of the device can be remotely influenced, without proper safeguards or authentication.

The Wi-Fi router is vulnerable to de-authentication attacks due to the absence of management frame protection, allowing forged deauthentication and disassociation frames to be broadcast without authentication or encryption. An attacker can use this to cause unauthorized disruptions and create a denial-of-service condition.

Authentication Bypass Using an Alternate Path or Channel vulnerability in Case-Themes Booked booked allows Authentication Abuse.This issue affects Booked: from n/a through <= 3.0.0.

Unrestricted Upload of File with Dangerous Type vulnerability in Bravis-Themes Bravis Addons bravis-addons allows Using Malicious Files.This issue affects Bravis Addons: from n/a through <= 1.1.9.

Authentication Bypass Using an Alternate Path or Channel vulnerability in ahachat AhaChat Messenger Marketing ahachat-messenger-marketing allows Password Recovery Exploitation.This issue affects AhaChat Messenger Marketing: from n/a through <= 1.1.

Unrestricted Upload of File with Dangerous Type vulnerability in zozothemes Wiguard wiguard allows Upload a Web Shell to a Web Server.This issue affects Wiguard: from n/a through < 2.0.1.

Authentication Bypass Using an Alternate Path or Channel vulnerability in kamleshyadav Miraculous Elementor miraculous-el allows Authentication Abuse.This issue affects Miraculous Elementor: from n/a through <= 2.0.7.

Music Assistant is an open-source media library manager that integrates streaming services with connected speakers. Versions 2.6.3 and below allow unauthenticated network-adjacent attackers to execute arbitrary code on affected installations. The music/playlists/update API allows users to bypass the .m3u extension enforcement and write files anywhere on the filesystem, which is exacerbated by the container running as root. This can be exploited to achieve Remote Code Execution by writing a malicious .pth file to the Python site-packages directory, which will execute arbitrary commands when Python loads. This issue has been fixed in version 2.7.0.

Slyde is a program that creates animated presentations from XML. In versions 0.0.4 and below, Node.js automatically imports **/*.plugin.{js,mjs} files including those from node_modules, so any malicious package with a .plugin.js file can execute arbitrary code when installed or required. All projects using this loading behavior are affected, especially those installing untrusted packages. This issue has been fixed in version 0.0.5. To workaround this issue, users can audit and restrict which packages are installed in node_modules.

Sensitive data disclosure and manipulation due to missing authentication. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 39870, Acronis Cyber Protect 16 (Linux, macOS, Windows) before build 39938, Acronis Cyber Protect 15 (Linux, macOS, Windows) before build 41800.

ADB Explorer is a fluent UI for ADB on Windows. Versions 0.9.26020 and below fail to validate the integrity or authenticity of the ADB binary path specified in the ManualAdbPath setting before executing it, allowing arbitrary code execution with the privileges of the current user. An attacker can exploit this by crafting a malicious App.txt settings file that points ManualAdbPath to an arbitrary executable, then convincing a victim to launch the application with a command-line argument directing it to the malicious configuration directory. This vulnerability could be leveraged through social engineering tactics, such as distributing a shortcut bundled with a crafted settings file in an archive, resulting in RCE upon application startup. Thus issue has been fixed in version 0.9.26021.

OpenClaw is a personal AI assistant. Versions 2026.2.13 and below allow the optional @openclaw/voice-call plugin Telnyx webhook handler to accept unsigned inbound webhook requests when telnyx.publicKey is not configured, enabling unauthenticated callers to forge Telnyx events. Telnyx webhooks are expected to be authenticated via Ed25519 signature verification. In affected versions, TelnyxProvider.verifyWebhook() could effectively fail open when no Telnyx public key was configured, allowing arbitrary HTTP POST requests to the voice-call webhook endpoint to be treated as legitimate Telnyx events. This only impacts deployments where the Voice Call plugin is installed, enabled, and the webhook endpoint is reachable from the attacker (for example, publicly exposed via a tunnel/proxy). The issue has been fixed in version 2026.2.14.

emp3r0r is a C2 designed by Linux users for Linux environments. Prior to version 3.21.2, multiple shared maps are accessed without consistent synchronization across goroutines. Under concurrent activity, Go runtime can trigger `fatal error: concurrent map read and map write`, causing C2 process crash (availability loss). Version 3.21.2 fixes this issue.

Skill Scanner is a security scanner for AI Agent Skills that detects prompt injection, data exfiltration, and malicious code patterns. A vulnerability in the API Server of Skill Scanner could allow a unauthenticated, remote attacker to interact with the server API and either trigger a denial of service (DoS) condition or upload arbitrary files. This vulnerability is due to an erroneous binding to multiple interfaces. An attacker could exploit this vulnerability by sending API requests to a device exposing the affected API Server. A successful exploit could allow the attacker to consume an excessive amount of resources (memory starvation) or to upload files to arbitrary folders on the affected device. This vulnerability affects Skill-scanner 1.0.1 and earlier releases when the API Server is enabled. The API Server is not enabled by default. Skill-scanner software releases 1.0.2 and later contain the fix for this vulnerability.

Execution After Redirect (EAR), Missing Authentication for Critical Function vulnerability in Inrove Software and Internet Services BiEticaret CMS allows Authentication Bypass, HTTP Response Splitting.This issue affects BiEticaret CMS: from 2.1.13 through 19022026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An attacker can exploit the update behavior of the WorkTime monitoring daemon to elevate privileges on the local system to NT Authority\SYSTEM. A malicious executable must be named  WTWatch.exe and dropped in the C:\ProgramData\wta\ClientExe directory, which is writable by "Everyone". The executable will then be run by the WorkTime monitoring daemon.

A malicious actor with administrative privileges can upload an arbitrary file to a user-controlled location within the deployment via a system REST API. Successful uploads may lead to remote code execution. By leveraging the vulnerability, a malicious actor may perform Remote Code Execution by uploading a specially crafted payload.

An authentication bypass vulnerability has been found in Thesamur's AutoGPT. This vulnerability allows an attacker to bypass authentication mechanisms. Once inside the web application, the attacker can use any of its features regardless of the authorisation method used.

The s2Member plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 260127. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for unauthenticated attackers to change arbitrary user's passwords, including administrators, and leverage that to gain access to their account.

The Buyent Classified plugin for WordPress (bundled with Buyent theme) is vulnerable to privilege escalation via user registration in all versions up to, and including, 1.0.7. This is due to the plugin not validating or restricting the user role during registration via the REST API endpoint. This makes it possible for unauthenticated attackers to register accounts with arbitrary roles, including administrator, by manipulating the _buyent_classified_user_type parameter during the registration process, granting them complete control over the WordPress site.

The Lizza LMS Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.0.3. This is due to the 'lizza_lms_pro_register_user_front_end' function not restricting what user roles a user can register with. This makes it possible for unauthenticated attackers to supply the 'administrator' role during registration and gain administrator access to the site.

The Toret Manager plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the 'trman_save_option' function and on the 'trman_save_option_items' in all versions up to, and including, 1.2.7. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site.

The Slider Future plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'slider_future_handle_image_upload' function in all versions up to, and including, 1.0.5. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible.

The Razorpay for WooCommerce plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the getCouponList() function in all versions up to, and including, 4.7.8. This is due to the checkAuthCredentials() permission callback always returning true, providing no actual authentication. This makes it possible for unauthenticated attackers to modify the billing and shipping contact information (email and phone) of any WooCommerce order by knowing or guessing the order ID.

OGP-Website installs prior git commit 52f865a4fba763594453068acf8fa9e3fc38d663 are affected by a type juggling flaw which if exploited can result in authentication bypass without knowledge of the victim account's password.

The Checkout Field Manager (Checkout Manager) for WooCommerce plugin for WordPress is vulnerable to unauthenticated limited file upload in all versions up to, and including, 7.8.1. This is due to the plugin not properly verifying that a user is authorized to perform file upload actions via the "ajax_checkout_attachment_upload" function. This makes it possible for unauthenticated attackers to upload files to the server, though file types are limited to WordPress's default allowed MIME types (images, documents, etc.).

The Clasifico Listing plugin for WordPress is vulnerable to privilege escalation in versions up to, and including, 2.0. This is due to the plugin allowing users who are registering new accounts to set their own role by supplying the 'listing_user_role' parameter. This makes it possible for unauthenticated attackers to gain elevated privileges by registering an account with the administrator role.

A vulnerability was determined in Tsinghua Unigroup Electronic Archives System up to 3.2.210802(62532). The impacted element is an unknown function of the file /Archive/ErecordManage/uploadFile.html. Executing a manipulation of the argument File can lead to unrestricted upload. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Orthanc versions before 1.12.10 are affected by an authorisation logic flaw in the application's HTTP Basic Authentication implementation. Successful exploitation could result in Privilege Escalation, potentially allowing full administrative access.

MajorDoMo (aka Major Domestic Module) is vulnerable to unauthenticated remote code execution through supply chain compromise via update URL poisoning. The saverestore module exposes its admin() method through the /objects/?module=saverestore endpoint without authentication because it uses gr('mode') (which reads directly from $_REQUEST) instead of the framework's $this->mode. An attacker can poison the system update URL via the auto_update_settings mode handler, then trigger the force_update handler to initiate the update chain. The autoUpdateSystem() method fetches an Atom feed from the attacker-controlled URL with trivial validation, downloads a tarball via curl with TLS verification disabled (CURLOPT_SSL_VERIFYPEER set to FALSE), extracts it using exec('tar xzvf ...'), and copies all extracted files to the document root using copyTree(). This allows an attacker to deploy arbitrary PHP files, including webshells, to the webroot with two GET requests.

Saturn Remote Mouse Server contains a command injection vulnerability that allows unauthenticated attackers to execute arbitrary commands by sending specially crafted UDP JSON frames to port 27000. Attackers on the local network can send malformed packets with unsanitized command data that the service forwards directly to OS execution functions, enabling remote code execution under the service account.

A flaw was found in QEMU in the uefi-vars virtual device. When the guest writes to register UEFI_VARS_REG_BUFFER_SIZE, the .write callback `uefi_vars_write` is invoked. The function allocates a heap buffer without zeroing the memory, leaving the buffer filled with residual data from prior allocations. When the guest later reads from register UEFI_VARS_REG_PIO_BUFFER_TRANSFER, the .read callback `uefi_vars_read` returns leftover metadata or other sensitive process memory from the previously allocated buffer, leading to an information disclosure vulnerability.

A flaw has been found in mingSoft MCMS 6.1.1. The affected element is an unknown function of the file /ms/file/uploadTemplate.do of the component Template Archive Handler. Executing a manipulation of the argument File can lead to unrestricted upload. The attack can be launched remotely. The exploit has been published and may be used.

Improper Restriction of Excessive Authentication Attempts, Improper Authentication vulnerability in Doruk Communication and Automation Industry and Trade Inc. Wispotter allows Password Brute Forcing, Brute Force.This issue affects Wispotter: from 1.0 before v2025.10.08.1.

The Video Conferencing with Zoom WordPress plugin before 4.6.6 contains an AJAX handler that has its nonce verification commented out, allowing unauthenticated attackers to generate valid Zoom SDK signatures for any meeting ID and retrieve the site's Zoom SDK key.

code-projects Scholars Tracking System 1.0 allows an authenticated attacker to achieve remote code execution via unrestricted file upload. The endpoints update_profile_picture.php and upload_picture.php store uploaded files in a web-accessible uploads/ directory using the original, user-supplied filename without validating the file type or extension. By uploading a PHP file and then requesting it from /uploads/, an attacker can execute arbitrary PHP code as the web server user.

Missing authentication in multiple administrative action scripts under /admin/ in ProjectWorlds Online Time Table Generator 1.0 allows remote attackers to perform unauthorized administrative operations (e.g.,adding records, deleting records) via direct HTTP requests to affected endpoints without a valid session.

SourceCodester Customer Support System 1.0 contains an incorrect access control vulnerability in ajax.php. The AJAX dispatcher does not enforce authentication or authorization before invoking administrative methods in admin_class.php based on the action parameter. An unauthenticated remote attacker can perform sensitive operations such as creating customers and deleting users (including the admin account), as well as modifying or deleting other application records (tickets, departments, comments), resulting in unauthorized data modification.

Missing authentication in /admin/student.php and /admin/teacher.php in ProjectWorlds Online Time Table Generator 1.0 allows remote attackers to obtain sensitive information (including plaintext password field values) via direct HTTP GET requests to these endpoints without a valid session.

An issue was discovered in OpenStack Nova before 30.2.2, 31 before 31.2.1, and 32 before 32.1.1. By writing a malicious QCOW header to a root or ephemeral disk and then triggering a resize, a user may convince Nova's Flat image backend to call qemu-img without a format restriction, resulting in an unsafe image resize operation that could destroy data on the host system. Only compute nodes using the Flat image backend (usually configured with use_cow_images=False) are affected.

A local privilege-escalation vulnerability has been discovered in the HPE Aruba Networking ClearPass OnGuard Software for Linux. Successful exploitation of this vulnerability could allow a local attacker to achieve arbitrary code execution with root privileges.