A Local File Inclusion (LFI) vulnerability exists in the /load-workflow endpoint of modelscope/agentscope version v0.0.4. This vulnerability allows an attacker to read arbitrary files from the server, including sensitive files such as API keys, by manipulating the filename parameter. The issue arises due to improper sanitization of user input passed to the os.path.join function, which can be exploited to access files outside the intended directory.

IBM EntireX 11.1 could allow a local user to obtain sensitive information when a detailed technical error message is returned. This information could be used in further attacks against the system.

Forever KidsWatch Call Me KW-50 R36_YDR_A3PW_GM7S_V1.0_2019_07_15_16.19.24_cob_h and Forever KidsWatch Call Me KW-60 R36CW_YDE_S4_A29_2_V1.0_2023.05.24_22.49.44_cob_b allow a malicious user to gain information about the device by sending an SMS to the device which returns sensitive information.

IBM ApplinX 11.1 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system.

IBM Security Verify Access Appliance and Container 10.0.0 through 10.0.8 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned. This information could be used in further attacks against the system.

IBM Security Verify Access Appliance and Container 10.0.0 through 10.0.8 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned. This information could be used in further attacks against the system.

CometBFT is a distributed, Byzantine fault-tolerant, deterministic state machine replication engine. In the `blocksync` protocol peers send their `base` and `latest` heights when they connect to a new node (`A`), which is syncing to the tip of a network. `base` acts as a lower ground and informs `A` that the peer only has blocks starting from height `base`. `latest` height informs `A` about the latest block in a network. Normally, nodes would only report increasing heights. If `B` fails to provide the latest block, `B` is removed and the `latest` height (target height) is recalculated based on other nodes `latest` heights. The existing code however doesn't check for the case where `B` first reports `latest` height `X` and immediately after height `Y`, where `X > Y`. `A` will be trying to catch up to 2000 indefinitely. This condition requires the introduction of malicious code in the full node first reporting some non-existing `latest` height, then reporting lower `latest` height and nodes which are syncing using `blocksync` protocol. This issue has been patched in versions 1.0.1 and 0.38.17 and all users are advised to upgrade. Operators may attempt to ban malicious peers from the network as a workaround.

In network HW, there is a possible system hang due to an uncaught exception. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00399035; Issue ID: MSV-2380.

IBM Security Verify Directory 10.0 through 10.0.3 is vulnerable to a denial of service when sending an LDAP extended operation.

VMware Aria Operations contains an information disclosure vulnerability. A malicious user with non-administrative privileges may exploit this vulnerability to retrieve credentials for an outbound plugin if a valid service credential ID is known.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. A vulnerability was discovered in Argo CD that exposed secret values in error messages and the diff view when an invalid Kubernetes Secret resource was synced from a repository. The vulnerability assumes the user has write access to the repository and can exploit it, either intentionally or unintentionally, by committing an invalid Secret to repository and triggering a Sync. Once exploited, any user with read access to Argo CD can view the exposed secret data. The vulnerability is fixed in v2.13.4, v2.12.10, and v2.11.13.

VMware Aria Operations for Logs contains an information disclosure vulnerability. A malicious actor with View Only Admin permissions may be able to read the credentials of a VMware product integrated with VMware Aria Operations for Logs

A denial-of-service vulnerability exists in the affected products. The vulnerability could allow a remote, non-privileged user to send malicious requests resulting in a major nonrecoverable fault causing a denial-of-service.

IBM Watson Query on Cloud Pak for Data (IBM Data Virtualization 1.8, 2.0, 2.1, 2.2, and 3.0.0) could allow an authenticated user to obtain sensitive information from objects published using Watson Query due to an improper data protection mechanism.

The issue was addressed with improved checks. This issue is fixed in iPadOS 17.7.4, macOS Sonoma 14.7.3, visionOS 2.3, iOS 18.3 and iPadOS 18.3, macOS Sequoia 15.3, watchOS 11.3, tvOS 18.3. Parsing a file may lead to an unexpected app termination.

matrix-hookshot is a Matrix bot for connecting to external services like GitHub, GitLab, JIRA, and more. When Hookshot 6 version 6.0.1 or below, or Hookshot 5 version 5.4.1 or below, is configured with GitHub support, it is vulnerable to a Denial of Service (DoS) whereby it can crash on restart due to a missing check. The impact is greater to you untrusted users can add their own GitHub organizations to Hookshot in order to connect their room to a repository. This vulnerability is fixed in 6.0.2 and 5.4.2.

IBM Analytics Content Hub 2.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could disclose sensitive information about the system that could aid in further attacks against the system.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could disclose sensitive information about the system that could aid in further attacks against the system.

IBM Cloud Pak System 2.3.3.6, 2.3.36 iFix1, 2.3.3.6 iFix2, 2.3.3.7, 2.3.3.7 iFix1, and 2.3.4.0 could disclose sensitive information about the system that could aid in further attacks against the system.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system.

Generation of Error Message Containing Sensitive Information vulnerability in David de Boer Paytium allows Retrieve Embedded Sensitive Data. This issue affects Paytium: from n/a through 4.4.11.

IBM InfoSphere Information Server 11.7 could allow a remote user to obtain sensitive version information that could aid in further attacks against the system.

Improper handling of alternate encoding occurs when Elastic Defend on Windows systems attempts to scan a file or process encoded as a multibyte character. This leads to an uncaught exception causing Elastic Defend to crash which in turn will prevent it from quarantining the file and/or killing the process.

The 1003 Mortgage Application plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 1.87. This is due the /inc/class/fnm/export.php file being publicly accessible with error logging enabled. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

A valid set of credentials in a .js file and a static token for communication were obtained from the decompiled IPA. An attacker could use the information to disrupt normal use of the application by changing the translation files and thus weaken the integrity of normal use.

A flaw was found in the FreeIPA API audit, where it sends the whole FreeIPA command line to journalctl. As a consequence, during the FreeIPA installation process, it inadvertently leaks the administrative user credentials, including the administrator password, to the journal database. In the worst-case scenario, where the journal log is centralized, users with access to it can have improper access to the FreeIPA administrator credentials.

The XINJE XL5E-16T and XD5E-24R-E programmable logic controllers V3.5.3b-V3.7.2a have a vulnerability in handling Modbus messages. When a TCP connection is established with the above series of controllers within a local area network (LAN), sending a specific Modbus message to the controller can cause the PLC to crash, interrupting the normal operation of the programs running in the PLC. This results in the ERR indicator light turning on and the RUN indicator light turning off.

A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client.

IBM MQ 9.3 LTS, 9.3 CD, 9.4 LTS, and 9.4 CD web console could allow a local user to obtain sensitive information when a detailed technical error message is returned.

Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore™ for Intel Kaby Lake, Phoenix SecureCore™ for Intel Coffee Lake, Phoenix SecureCore™ for Intel Comet Lake, Phoenix SecureCore™ for Intel Ice Lake allows Input Data Manipulation.This issue affects SecureCore™ for Intel Kaby Lake: before 4.0.1.1012; SecureCore™ for Intel Coffee Lake: before 4.1.0.568; SecureCore™ for Intel Comet Lake: before 4.2.1.292; SecureCore™ for Intel Ice Lake: before 4.2.0.334.

Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore™ for Intel Kaby Lake, Phoenix SecureCore™ for Intel Coffee Lake, Phoenix SecureCore™ for Intel Comet Lake, Phoenix SecureCore™ for Intel Ice Lake allows Input Data Manipulation.This issue affects SecureCore™ for Intel Kaby Lake: before 4.0.1.1012; SecureCore™ for Intel Coffee Lake: before 4.1.0.568; SecureCore™ for Intel Comet Lake: before 4.2.1.292; SecureCore™ for Intel Ice Lake: before 4.2.0.334.

Specifically crafted SCMI messages sent to an SCP running SCP-Firmware release versions up to and including 2.15.0 may lead to a Usage Fault and crash the SCP

Specifically crafted SCMI messages sent to an SCP running SCP-Firmware release versions up to and including 2.15.0 may lead to a Usage Fault and crash the SCP

SAP BusinessObjects Business Intelligence Platform allows an unauthenticated attacker to perform session hijacking over the network without any user interaction, due to an information disclosure vulnerability. Attacker can access and modify all the data of the application.

Applications based on SAP GUI for HTML in SAP NetWeaver Application Server ABAP store user input in the local browser storage to improve usability. An attacker with administrative privileges or access to the victim�s user directory on the Operating System level would be able to read this data. Depending on the user input provided in transactions, the disclosed data could range from non-critical data to highly sensitive data, causing high impact on confidentiality of the application.

SAP GUI for Java saves user input on the client PC to improve usability. An attacker with administrative privileges or access to the victim�s user directory on the Operating System level would be able to read this data. Depending on the user input provided in transactions, the disclosed data could range from non-critical data to highly sensitive data, causing high impact on confidentiality of the application.

SAP GUI for Windows stores user input on the client PC to improve usability. Under very specific circumstances an attacker with administrative privileges or access to the victim�s user directory on the Operating System level would be able to read this data. Depending on the user input provided in transactions, the disclosed data could range from non-critical data to highly sensitive data, causing high impact on confidentiality of the application.

SAP NetWeaver Application Server for ABAP and ABAP Platform allows an attacker to gain unauthorized access to system information. By using a specific URL parameter, an unauthenticated attacker could retrieve details such as system configuration. This has a limited impact on the confidentiality of the application and may be leveraged to facilitate further attacks or exploits.

notion-go is a collection of libraries for supporting sign and verify OCI artifacts. Based on Notary Project specifications. The issue was identified during Quarkslab's security audit on the Certificate Revocation List (CRL) based revocation check feature. After retrieving the CRL, notation-go attempts to update the CRL cache using the os.Rename method. However, this operation may fail due to operating system-specific limitations, particularly when the source and destination paths are on different mount points. This failure could lead to an unexpected program termination. In method `crl.(*FileCache).Set`, a temporary file is created in the OS dedicated area (like /tmp for, usually, Linux/Unix). The file is written and then it is tried to move it to the dedicated `notation` cache directory thanks `os.Rename`. As specified in Go documentation, OS specific restriction may apply. When used with Linux OS, it is relying on rename syscall from the libc and as per the documentation, moving a file to a different mountpoint raises an EXDEV error, interpreted as Cross device link not permitted error. Some Linux distribution, like RedHat use a dedicated filesystem (tmpfs), mounted on a specific mountpoint (usually /tmp) for temporary files. When using such OS, revocation check based on CRL will repeatedly crash notation. As a result the signature verification process is aborted as process crashes. This issue has been addressed in version 1.3.0-rc.2 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker sending a specific BGP update packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continuous receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability. This issue affects Junos OS:  * from 21.4 before 21.4R3-S9,  * from 22.2 before 22.2R3-S5,  * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S5,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S3,  * from 24.2 before 24.2R1-S2, 24.2R2;  This issue does not affect versions prior to 21.1R1. Junos OS Evolved:  * from 21.4 before 21.4R3-S9-EVO,  * from 22.2 before 22.2R3-S5-EVO,  * from 22.3 before 22.3R3-S4-EVO, * from 22.4 before 22.4R3-S5-EVO,  * from 23.2 before 23.2R2-S3-EVO,  * from 23.4 before 23.4R2-S3-EVO,  * from 24.2 before 24.2R1-S2-EVO, 24.2R2-EVO. This issue does not affect versions prior to 21.1R1-EVO

An Improper Handling of Exceptional Conditions vulnerability in the command-line processing of Juniper Networks Junos OS on SRX1500, SRX4100, and SRX4200 devices allows a local, low-privileged authenticated attacker executing the 'show chassis environment pem' command to cause the chassis daemon (chassisd) to crash and restart, resulting in a temporary Denial of Service (DoS). However, repeated execution of this command will eventually cause the chassisd process to fail to restart, impacting packet processing on the system. This issue affects Junos OS on SRX1500, SRX4100, SRX4200:  * All versions before 21.4R3-S9,  * from 22.2 before 22.2R3-S5,  * from 22.3 before 22.3R3-S4,  * from 22.4 before 22.4R3-S4,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S1.

Mattermost versions 10.x <= 10.2 fail to accurately reflect missing settings, which allows confusion for admins regarding a Calls security-sensitive configuration via incorrect UI reporting.

In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.

In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.

In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.

IBM Cognos Controller 11.0.0 through 11.0.1 and IBM Controller 11.1.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system.

IBM Cognos Controller 11.0.0 through 11.0.1 and IBM Controller 11.1.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system.

IBM Cognos Controller 11.0.0 through 11.0.1 and IBM Controller 11.1.0 could allow a remote attacker to obtain sensitive information when a stack trace is returned in the browser.

IBM Security ReaQta 3.12 returns sensitive information in an HTTP response that could be used in further attacks against the system.