Lack of Rate Limiting in Sign-up workflow in Perforce Gliffy prior to version 4.14.0-7 on Gliffy online allows attacker to enumerate valid user emails and potentially DOS the server

A flaw was found in Wildfly Elytron integration. The component does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it more susceptible to brute force attacks via CLI.

A vulnerability was found in Excitel Broadband Private my Excitel App 3.13.0 on Android. It has been classified as problematic. Affected is an unknown function of the component One-Time Password Handler. The manipulation leads to improper restriction of excessive authentication attempts. The vendor was contacted early about this disclosure but did not respond in any way.

Authelia is an open-source authentication and authorization server providing two-factor authentication and single sign-on (SSO) for applications via a web portal. If users are allowed to sign in via both username and email the regulation system treats these as separate login events. This leads to the regulation limitations being effectively doubled assuming an attacker using brute-force to find a user password. It's important to note that due to the effective operation of regulation where no user-facing sign of their regulation ban being visible either via timing or via API responses, it's effectively impossible to determine if a failure occurs due to a bad username password combination, or a effective ban blocking the attempt which heavily mitigates any form of brute-force. This occurs because the records and counting process for this system uses the method utilized for sign in rather than the effective username attribute. This has a minimal impact on account security, this impact is increased naturally in scenarios when there is no two-factor authentication required and weak passwords are used. This makes it a bit easier to brute-force a password. A patch for this issue has been applied to versions 4.38.19, and 4.39.0. Users are advised to upgrade. Users unable to upgrade should 1. Not heavily modify the default settings in a way that ends up with shorter or less frequent regulation bans. The default settings effectively mitigate any potential for this issue to be exploited. and 2. Disable the ability for users to login via an email address.

Improper Restriction of Excessive Authentication Attempts vulnerability in Rameez Iqbal Real Estate Manager allows Password Brute Forcing. This issue affects Real Estate Manager: from n/a through 7.3.

A rate limiting issue in Sylius v2.0.2 allows a remote attacker to perform unrestricted brute-force attacks on user accounts, significantly increasing the risk of account compromise and denial of service for legitimate users. The Supplier's position is that the Sylius core software is not intended to address brute-force attacks; instead, customers deploying a Sylius-based system are supposed to use "firewalls, rate-limiting middleware, or authentication providers" for that functionality.

An improper restriction of excessive authentication attempts [CWE-307] in FortiClientEMS version 7.2.0 through 7.2.4 and before 7.0.10 allows an unauthenticated attacker to try a brute force attack against the FortiClientEMS console via crafted HTTP or HTTPS requests.

JATOS 3.9.4 contains a denial-of-service (DoS) vulnerability in the authentication system, where an attacker can prevent legitimate users from accessing their accounts by repeatedly sending multiple failed login attempts. Specifically, by submitting 3 incorrect login attempts every minute, the attacker can trigger the account lockout mechanism on the account level, effectively locking the user out indefinitely. Since the lockout is applied to the user account and not based on the IP address, any attacker can trigger the lockout on any user account, regardless of their privileges.

Trend Micro ID Security, version 3.0 and below contains a vulnerability that could allow an attacker to send an unlimited number of email verification requests without any restriction, potentially leading to abuse or denial of service.

Improper Restriction of Excessive Authentication Attempts vulnerability in Digital Operation Services WiFiBurada allows Use of Known Domain Credentials.This issue affects WiFiBurada: before 1.0.5.

Dell RecoverPoint for Virtual Machines 6.0.x contains a vulnerability. An improper Restriction of Excessive Authentication vulnerability where a Network attacker could potentially exploit this vulnerability, leading to a brute force attack or a dictionary attack against the RecoverPoint login form and a complete system compromise. This allows attackers to brute-force the password of valid users in an automated manner.

OpenCTI is an open-source cyber threat intelligence platform. In versions below 6.2.18, because the function to limit the rate of OTP does not exist, an attacker with valid credentials or a malicious user who commits internal fraud can break through the two-factor authentication and hijack the account. This is because the otpLogin mutation does not implement One Time Password rate limiting. As of time of publication, it is unknown whether a patch is available.

An issue in the BYD Dilink Headunit System v3.0 to v4.0 allows attackers to bypass authentication via a bruteforce attack.

A vulnerability exists in NSD570 login panel that does not restrict excessive authentication attempts. If exploited, this could cause account takeover and unauthorized access to the system when an attacker conducts brute-force attacks against the equipment login. Note that the system supports only one concurrent session and implements a delay of more than a second between failed login attempts making it difficult to automate the attacks.

Dell Wyse Management Suite, versions WMS 4.4 and prior, contain an Improper Restriction of Excessive Authentication Attempts vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass.

Logsign Unified SecOps Platform Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the password reset mechanism. The issue results from the lack of restriction of excessive authentication attempts. An attacker can leverage this vulnerability to reset a user's password and bypass authentication on the system. Was ZDI-CAN-24164.

phpIPAM version 1.5.1 contains a vulnerability where an attacker can bypass the IP block mechanism to brute force passwords for users by using the 'X-Forwarded-For' header. The issue lies in the 'get_user_ip()' function in 'class.Common.php' at lines 1044 and 1045, where the presence of the 'X-Forwarded-For' header is checked and used instead of 'REMOTE_ADDR'. This vulnerability allows attackers to perform brute force attacks on user accounts, including the admin account. The issue is fixed in version 1.7.0.

There is no limit on the number of failed login attempts permitted with the Clinician Password or the Serial Number Clinician Password. An attacker could execute a brute-force attack to gain unauthorized access to the ventilator, and then make changes to device settings that could disrupt the function of the device and/or result in unauthorized information disclosure.

An insufficient entropy vulnerability in the SecuSUITE Secure Client Authentication (SCA) Server of SecuSUITE versions 5.0.420 and earlier could allow an attacker to potentially enroll an attacker-controlled device to the victim’s account and telephone number.

A vulnerability was found in Digistar AG-30 Plus 2.6b. It has been classified as problematic. Affected is an unknown function of the component Login Page. The manipulation leads to improper restriction of excessive authentication attempts. The complexity of an attack is rather high. The exploitability is told to be difficult. The vendor was contacted early about this disclosure but did not respond in any way.

SAP NetWeaver AS Java allows an unauthenticated attacker to brute force the login functionality in order to identify the legitimate user IDs. This has an impact on confidentiality but not on integrity or availability.

This vulnerability exists in the Wave 2.0 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user OTP, MPIN or password, which could lead to gain unauthorized access and compromise other user accounts.

A lack of rate limiting in the OTP validation component of Digitory Multi Channel Integrated POS v1.0 allows attackers to gain access to the ordering system and place an excessive amount of food orders.

In Progress® Telerik® Report Server versions prior to 2024 Q3 (10.2.24.806), a credential stuffing attack is possible through improper restriction of excessive login attempts.

This vulnerability exists in Shilpi Client Dashboard due to missing restrictions for incorrect login attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on password, which could lead to gain unauthorized access to other user accounts.

A vulnerability in Kaiten version 57.131.12 and earlier allows attackers to bypass the PIN code authentication mechanism. The application requires users to input a 6-digit PIN code sent to their email for authorization after entering their login credentials. However, the request limiting mechanism can be easily bypassed, enabling attackers to perform a brute force attack to guess the correct PIN and gain unauthorized access to the application.

This vulnerability exists in Apex Softcell LD Geo due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on login OTP, which could lead to gain unauthorized access to other user accounts.

Improper Restriction of Excessive Authentication Attempts vulnerability in Yordam Information Technology Yordam Library Automation System allows Interface Manipulation.This issue affects Yordam Library Automation System: before 20.1.

An issue was discovered in Bravura Security Fabric versions 12.3.x before 12.3.5.32784, 12.4.x before 12.4.3.35110, 12.5.x before 12.5.2.35950, 12.6.x before 12.6.2.37183, and 12.7.x before 12.7.1.38241. An unauthenticated attacker can cause a resource leak by issuing multiple failed login attempts through API SOAP.

This vulnerability exists in Reedos aiM-Star version 2.0.1 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user passwords, which could lead to gain unauthorized access and compromise other user accounts.

An improper authorization vulnerability [CWE-285] in FortiSOAR version 7.4.0 through 7.4.3, 7.3.0 through 7.3.2, 7.2.0 through 7.2.2, 7.0.0 through 7.0.3 change password endpoint may allow an authenticated attacker to perform a brute force attack on users and administrators password via crafted HTTP requests.

An improper restriction of excessive authentication attempts vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow local network authenticated administrators to perform an arbitrary number of authentication attempts via unspecified vectors. QuTScloud is not affected. We have already fixed the vulnerability in the following versions: QTS 5.2.0.2782 build 20240601 and later QuTS hero h5.2.0.2782 build 20240601 and later

A vulnerability was found in Windmill 1.380.0. It has been classified as problematic. Affected is an unknown function of the file backend/windmill-api/src/users.rs of the component HTTP Request Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 1.390.1 is able to address this issue. The patch is identified as acfe7786152f036f2476f93ab5536571514fa9e3. It is recommended to upgrade the affected component.

RapidIdentity LTS through 2023.0.2 and Cloud through 2024.08.0 improperly restricts excessive authentication attempts and allows a remote attacker to cause a denial of service via the username parameters.

A vulnerability identified in NetIQ Advance Authentication that doesn't enforce account lockout when brute force attack is performed on API based login. This issue may lead to user account compromise if successful or may impact server performance. This issue impacts all NetIQ Advance Authentication before 6.3.5.1

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Pluck CMS 4.7.18 does not restrict failed login attempts, allowing attackers to execute a brute force attack.

Adobe Commerce versions 2.4.7-p1, 2.4.6-p6, 2.4.5-p8, 2.4.4-p9 and earlier are affected by an Improper Restriction of Excessive Authentication Attempts vulnerability that could result in a security feature bypass. An attacker could exploit this vulnerability to perform brute force attacks and potentially gain unauthorized access to accounts. Exploitation of this issue does not require user interaction, but attack complexity is high.

A vulnerability has been identified in SINEC Traffic Analyzer (6GK8822-1BG01-0BA0) (All versions < V2.0). The affected application do not properly enforce restriction of excessive authentication attempts. This could allow an unauthenticated attacker to conduct brute force attacks against legitimate user credentials or keys.

A vulnerability has been identified in Location Intelligence family (All versions < V4.4). Affected products do not properly enforce restriction of excessive authentication attempts. This could allow an unauthenticated remote attacker to conduct brute force attacks against legitimate user passwords.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a remote code execution (RCE) vulnerability.

An issue in Horizon Business Services Inc. Caterease 16.0.1.1663 through 24.0.1.2405 and possibly later versions, allows a local attacker to perform a Password Brute Forcing attack due to improper restriction of excessive authentication attempts.

An improper restriction of excessive authentication attempts in GroupMe allows a unauthenticated attacker to elevate privileges over a network.

xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 SP1). The affected application does not properly implement brute force protection against user credentials in its Client Communication component. This could allow an attacker to learn user credentials that are vulnerable to brute force attacks.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 SP1). The affected application does not properly implement brute force protection against user credentials in its web API. This could allow an attacker to learn user credentials that are vulnerable to brute force attacks.

IBM Storage Defender - Resiliency Service 2.0.0 through 2.0.4 uses an inadequate account lockout setting that could allow an attacker on the network to brute force account credentials. IBM X-Force ID: 281678.

Improper Restriction of Excessive Authentication Attempts vulnerability in Mia Technology Inc. Mia-Med Health Aplication allows Interface Manipulation.This issue affects Mia-Med Health Aplication: before 1.0.14.

A vulnerability exists in the UNEM server / APIGateway that if exploited allows a malicious user to perform an arbitrary number of authentication attempts using different passwords, and eventually gain access to other components in the same security realm using the targeted account.

Improper Restriction of Excessive Authentication Attempts vulnerability in wpdevart Contact Form Builder, Contact Widget allows Functionality Bypass.This issue affects Contact Form Builder, Contact Widget: from n/a through 2.1.7.