Sielco PolyEco1000 uses a weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

OpenClinic GA versions 5.09.02 and 5.89.05b contain an authentication mechanism within the system that does not provide sufficient complexity to protect against brute force attacks, which may allow unauthorized users to access the system after no more than a fixed maximum number of attempts.

Various rest resources in Fisheye and Crucible before version 4.8.9 allowed remote attackers to brute force user login credentials as rest resources did not check if users were beyond their max failed login limits and therefore required solving a CAPTCHA in addition to providing user credentials for authentication via a improper restriction of excess authentication attempts vulnerability.

An issue was discovered on Samsung mobile devices with O(8.x) (with TEEGRIS) software. The Gatekeeper Trustlet allows a brute-force attack on user credentials. The Samsung ID is SVE-2020-16908 (June 2020).

A vulnerability was discovered in GitLab versions before 13.1.10, 13.2.8 and 13.3.4. GitLab OAuth endpoint was vulnerable to brute-force attacks through a specific parameter.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It has brute-force attack mishandling because the CAS service lacks a limit on login failures.

OX App Suite 7.10.1 to 7.10.3 has improper input validation for rate limits with a crafted User-Agent header, spoofed vacation notices, and /apps/load memory consumption.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available.

Pluck CMS 4.7.18 does not restrict failed login attempts, allowing attackers to execute a brute force attack.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Dell EMC AppSync versions 3.9 to 4.3 contain an Improper Restriction of Excessive Authentication Attempts Vulnerability that can be exploited from UI and CLI. An adjacent unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.

In Sorcery before 0.15.0, there is a brute force vulnerability when using password authentication via Sorcery. The brute force protection submodule will prevent a brute force attack for the defined lockout period, but once expired, protection will not be re-enabled until a user or malicious actor logs in successfully. This does not affect users that do not use the built-in brute force protection submodule, nor users that use permanent account lockout. This has been patched in 0.15.0.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) (Exynos7885, Exynos8895, and Exynos9810 chipsets) software. The Gatekeeper trustlet allows a brute-force attack on the screen lock password. The Samsung ID is SVE-2019-14575 (January 2020).

A lack of rate limiting in the login page of Safe App version a3.0.9 allows attackers to bypass authentication via a brute force attack.

The authentication implementation on the xArm controller has very low entropy, making it vulnerable to a brute-force attack. There is no mechanism in place to mitigate or lockout automated attempts to gain access.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

The cookie session ID is of insufficient length and can be exploited by brute force, which may allow a remote attacker to obtain a valid session, bypass authentication, and manipulate the transmitter.

OpenCart CMS v4.0.2.2 was discovered to lack a protective mechanism on its login page against excessive login attempts, allowing unauthenticated attackers to gain access to the application via a brute force attack to the password parameter.

There is no limit on the number of login attempts in the web server for the SNAP PAC S1 Firmware version R10.3b. This could allow for a brute-force attack on the built-in web server login.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of insufficient measures to prevent multiple failed authentication attempts. An unauthenticated remote attacker can execute a crafted Javascript to expose captcha in page, making it very easy for bots to bypass the captcha check and more susceptible to brute force attacks.

UVDesk Community Skeleton v1.1.1 allows unauthenticated attackers to perform brute force attacks on the login page to gain access to the application.

Windows IIS Server Elevation of Privilege Vulnerability

Advantech Spectre RT ERT351 Versions 5.1.3 and prior has insufficient login authentication parameters required for the web application may allow an attacker to gain full access using a brute-force password attack.

Improper Restriction of Excessive Authentication Attempts vulnerability in Be Devious Web Development Password Reset with Code for WordPress REST API allows Authentication Abuse.This issue affects Password Reset with Code for WordPress REST API: from n/a through 0.0.15.

An unauthorized user could gain account access to IQ Wifi 6 versions prior to 2.0.2 by conducting a brute force authentication attack.

The number of login attempts is not limited. This could allow an attacker to perform a brute force on HTTP basic authentication.

SpliceCom Maximiser Soft PBX v1.5 and before does not restrict excessive authentication attempts, allowing attackers to bypass authentication via a brute force attack.

Plataformatec Devise version 4.5.0 and earlier, using the lockable module contains a CWE-367 vulnerability in The `Devise::Models::Lockable` class, more specifically at the `#increment_failed_attempts` method. File location: lib/devise/models/lockable.rb that can result in Multiple concurrent requests can prevent an attacker from being blocked on brute force attacks. This attack appear to be exploitable via Network connectivity - brute force attacks. This vulnerability appears to have been fixed in 4.6.0 and later.

Moxa IKS and EDS do not implement sufficient measures to prevent multiple failed authentication attempts, which may allow an attacker to discover passwords via brute force attack.

IBM Robotic Process Automation with Automation Anywhere 11 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161411.

user_oidc app is an OpenID Connect user backend for Nextcloud. Authentication can be broken/bypassed in user_oidc app. It is recommended that the Nextcloud user_oidc app is upgraded to 1.3.2

HCL AppScan Standard is vulnerable to excessive authorization attempts

D-Link DSL-224 firmware version 3.0.10 CWE-307: Improper Restriction of Excessive Authentication Attempts

Improper Restriction of Excessive Authentication Attempts in GitHub repository froxlor/froxlor prior to 2.0.20.

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts.

BlackVue DR750-2CH LTE v.1.012_2022.10.26 was discovered to contain a weak default passphrase which can be easily cracked via a brute force attack if the WPA2 handshake is intercepted.

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 2023.Q1.1223.

Improper restriction of excessive authentication attempts in the SSHGuard component of Netgate pfSense Plus software v22.05.1 and pfSense CE software v2.6.0 allows attackers to bypass brute force protection mechanisms via crafted web requests.

An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. There is no bruteforce protection (e.g., lockout) established. An attacker might be able to bruteforce the password to authenticate on the device.

Missing Rate Limiting in Web Applications operating on Business-DNA Solutions GmbH’s TopEase® Platform Version <= 7.1.27 on the Login Form allows an unauthenticated remote attacker to perform multiple login attempts, which facilitates gaining privileges.

Lack of rate limiting in M-Files Server and M-Files Web products with versions before 21.12.10873.0 in certain type of user accounts allows unlimited amount of attempts and therefore makes brute-forcing login accounts easier.

In Omron PLC CS series, all versions, Omron PLC CJ series, all versions, and Omron PLC NJ series, all versions, the software does not implement sufficient measures to prevent multiple failed authentication attempts within in a short time frame, making it more susceptible to brute force attacks.

bl-kernel/security.class.php in Bludit 3.9.2 allows attackers to bypass a brute-force protection mechanism by using many different forged X-Forwarded-For or Client-IP HTTP headers.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. The Authentication mechanism has no brute-force prevention.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

The code that performs password matching when using 'Basic' HTTP authentication does not use a constant-time memcmp and has no rate-limiting. This means that an unauthenticated network attacker can brute-force the HTTP basic password, byte-by-byte, by recording the webserver's response time until the unauthorized (401) response.

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.