Under certain circumstances IQ Panel4 and IQ4 Hub panel software prior to version 4.4.2 could allow unauthorized access to settings.

An unauthorized user could access debug features in Quantum HD Unity products that were accidentally exposed.

Under certain circumstances the session token is not cleared on logout.

A vulnerability in versions 10.1 through 10.5 of Johnson Controls CEM Systems AC2000 allows a remote attacker to access to the system without adequate authorization. This issue affects: Johnson Controls CEM Systems AC2000 10.1; 10.2; 10.3; 10.4; 10.5.

Under certain configurations an unauthenticated remote user could be given access to credentials stored in the exacqVision Server.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows OS Command Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Unauthenticated Remote Code Execution and Information Disclosure due to Local File Inclusion (LFI) vulnerability in Johnson Controls Frick Controls Quantum HD allow an unauthenticated attacker to execute arbitrary code on the affected device, leading to full system compromise. This issue affects Frick Controls Quantum HD: Frick Controls Quantum HD version 10.22 and prior.

Hardcoded Email Credentials Saved as Plaintext in Firmware (CWE-256: Plaintext Storage of a Password) vulnerability in Frick Controls Quantum HD version 10.22 and prior lead to unauthorized access, exposure of sensitive information, and potential misuse or system compromise This issue affects Frick Controls Quantum HD version 10.22 and prior.

Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

A vulnerability with the SmartService API Service option exists whereby an unauthorized user could potentially exploit this to upload malicious code to the server that could be executed at system level privileges. This affects Johnson Controls' Kantech EntraPass Corporate Edition versions 8.0 and prior; Kantech EntraPass Global Edition versions 8.0 and prior.

Unauthenticated Remote Code Execution i.e Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

An unauthenticated user could log into iSTAR Ultra, iSTAR Ultra LT, iSTAR Ultra G2, and iSTAR Edge G2 with administrator rights.

A debug feature in Sensormatic Electronics Illustra Pro Gen 4 Dome and PTZ cameras allows a user to compromise credentials after a long period of sustained attack.

All versions of iSTAR Ultra prior to version 6.8.9.CU01 are vulnerable to a command injection that could allow an unauthenticated user root access to the system.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

IBM Robotic Process Automation with Automation Anywhere 11 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161411.

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

Plataformatec Devise version 4.5.0 and earlier, using the lockable module contains a CWE-367 vulnerability in The `Devise::Models::Lockable` class, more specifically at the `#increment_failed_attempts` method. File location: lib/devise/models/lockable.rb that can result in Multiple concurrent requests can prevent an attacker from being blocked on brute force attacks. This attack appear to be exploitable via Network connectivity - brute force attacks. This vulnerability appears to have been fixed in 4.6.0 and later.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

Zitadel is open-source identity infrastructure software. Prior to 4.6.0, 3.4.3, and 2.71.18, an attacker can perform an online brute-force attack on OTP, TOTP, and passwords. While Zitadel allows preventing online brute force attacks in scenarios like TOTP, Email OTP, or passwords using a lockout mechanism. The mechanism is not enabled by default and can cause a denial of service for the corresponding user if enabled. Additionally, the mitigation strategies were not fully implemented in the more recent resource-based APIs. This vulnerability is fixed in 4.6.0, 3.4.3, and 2.71.18.

Lack of protection against brute force attacks in M-Files Server before 23.12.13205.0 allows an attacker unlimited authentication attempts, potentially compromising targeted M-Files user accounts by guessing passwords.

The Theme My Login 2FA WordPress plugin before 1.2 does not rate limit 2FA validation attempts, which may allow an attacker to brute-force all possibilities, which shouldn't be too long, as the 2FA codes are 6 digits.

EuroTel ETL3100 versions v01c01 and v01x37 does not limit the number of attempts to guess administrative credentials in remote password attacks to gain full control of the system.

An issue was discovered in weijiang1994 university-bbs (aka Blogin) in commit 9e06bab430bfc729f27b4284ba7570db3b11ce84 (2025-01-13). A weak verification code generation mechanism combined with missing rate limiting allows attackers to perform brute-force attacks on verification codes without authentication. Successful exploitation may result in account takeover via password reset or other authentication bypass methods.

A vulnerability was found in Thecosy IceCMS 2.0.1. It has been classified as problematic. Affected is an unknown function of the file /login of the component Captcha Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-247884.

Sielco PolyEco1000 uses a weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

Dell EMC ECS versions prior to 3.4.0.0 contain an improper restriction of excessive authentication attempts vulnerability. An unauthenticated remote attacker may potentially perform a password brute-force attack to gain access to the targeted accounts.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

EPSON WebConfig and Epson Web Control for SEIKO EPSON Projector Products do not restrict excessive authentication attempts. An administrative user's password may be identified through a brute force attack.

HCL AppScan Standard is vulnerable to excessive authorization attempts

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Pluck CMS 4.7.18 does not restrict failed login attempts, allowing attackers to execute a brute force attack.

OpenCart CMS v4.0.2.2 was discovered to lack a protective mechanism on its login page against excessive login attempts, allowing unauthenticated attackers to gain access to the application via a brute force attack to the password parameter.

xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts.

Improper restriction of excessive authentication attempts vulnerability in QSAN Storage Manager, XEVO, SANOS allows remote attackers to discover users’ credentials and obtain access via a brute force attack. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

Gestsup before 3.2.10 allows account takeover through the password recovery functionality (remote). The affected component is the file forgot_pwd.php - it uses a weak algorithm for the generation of password recovery tokens (the PHP uniqueid function), allowing a brute force attack.

The application does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it possible for an attacker to guess user credentials.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers to access uncontrolled the login service at /webif/SecurityModule in a brute force attack. The password could be weak and default username is known as 'admin'. This is usable and part of an attack chain to gain SSH root access.

EyesOfNetwork 5.3-10 uses an integer of between 8 and 10 digits for the session ID, which might be leveraged for brute-force authentication bypass (such as in CVE-2021-27513 exploitation).

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

UVDesk Community Skeleton v1.1.1 allows unauthenticated attackers to perform brute force attacks on the login page to gain access to the application.

bl-kernel/security.class.php in Bludit 3.9.2 allows attackers to bypass a brute-force protection mechanism by using many different forged X-Forwarded-For or Client-IP HTTP headers.

Advantech Spectre RT ERT351 Versions 5.1.3 and prior has insufficient login authentication parameters required for the web application may allow an attacker to gain full access using a brute-force password attack.

In Omron PLC CS series, all versions, Omron PLC CJ series, all versions, and Omron PLC NJ series, all versions, the software does not implement sufficient measures to prevent multiple failed authentication attempts within in a short time frame, making it more susceptible to brute force attacks.

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 0.0.0.

An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. There is no bruteforce protection (e.g., lockout) established. An attacker might be able to bruteforce the password to authenticate on the device.