Stack-based buffer overflow in PQCore.exe in Print Manager Plus 2008 Client Billing and Authentication 7.0.127.16 allows remote attackers to cause a denial of service (service outage) via a series of long packets to TCP port 48101.

BugHunter HTTP SERVER (httpsv.exe) 1.6.2 allows remote attackers to cause a denial of service (application crash) via a large number of requests for nonexistent pages.

nls_ascii.c in Linux before 2.6.8.1 uses an incorrect table size, which allows attackers to cause a denial of service (kernel crash) via a buffer overflow.

Cisco Intrusion Prevention System (IPS) Software in ASA 5500-X IPS-SSP software modules before 7.1(7)sp1E4 allows remote attackers to cause a denial of service (Analysis Engine process hang or device reload) via fragmented (1) IPv4 or (2) IPv6 packets, aka Bug ID CSCue51272.

The General Responder implementation in the IP Service Level Agreement (SLA) feature in Cisco IOS 15.2 and IOS XE 3.1.xS through 3.4.xS before 3.4.5S and 3.5.xS through 3.7.xS before 3.7.2S allows remote attackers to cause a denial of service (device reload) via crafted (1) IPv4 or (2) IPv6 IP SLA packets on UDP port 1167, aka Bug ID CSCuc72594.

A CWE-119 Buffer Errors vulnerability exists in Modicon M580 CPU - BMEP582040, all versions before V2.90, and Modicon Ethernet Module BMENOC0301, all versions before V2.16, which could cause denial of service on the FTP service of the controller or the Ethernet BMENOC module when it receives a FTP CWD command with a data length greater than 1020 bytes. A power cycle is then needed to reactivate the FTP service.

eMule 0.29c allows remote attackers to cause a denial of service (crash) via a long password, possibly due to a buffer overflow.

MAILsweeper for SMTP 4.3.6 and 4.3.7 allows remote attackers to cause a denial of service (CPU consumption) via a PowerPoint attachment that either (1) is corrupt or (2) contains "embedded objects."

An Improper Handling of Length Parameter Inconsistency issue was discovered in Moxa OnCell G3100-HSPA Series version 1.4 Build 16062919 and prior. An attacker may be able to edit the element of an HTTP request, causing the device to become unavailable.

An exploitable denial-of-service vulnerability exists in the XML_GetRawEncJpg Wi-Fi command of the NT9665X Chipset firmware, running on the Anker Roav A1 Dashcam, version RoavA1SWV1.9. A specially crafted packet can cause an invalid memory dereference, resulting in a device reboot.

LGSERVER.EXE in BrightStor ARCserve Backup for Laptops & Desktops r11.1 allows remote attackers to cause a denial of service (daemon crash) via a value of 0xFFFFFFFF at a certain point in an authentication negotiation packet, which results in an out-of-bounds read.

The IP stack in Cisco Intrusion Prevention System (IPS) Software in ASA 5500-X IPS-SSP software and hardware modules before 7.1(5)E4, IPS 4500 sensors before 7.1(6)E4, and IPS 4300 sensors before 7.1(5)E4 allows remote attackers to cause a denial of service (MainApp process hang) via malformed IPv4 packets, aka Bug ID CSCtx18596.

An issue was discovered on Tenda AC7 V15.03.06.44_CN, AC9 V15.03.05.19(6318)_CN, AC10 V15.03.06.23_CN, AC15 V15.03.05.19_CN, and AC18 V15.03.05.19(6318)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the 'ntpServer' parameter for a post request, the value is directly used in a strcpy to a local variable placed on the stack, which overrides the return address of the function.

Heap-based buffer overflow in OpenConnect 3.18 allows remote servers to cause a denial of service via a crafted greeting banner.

Cisco Unified Presence Server (CUPS) 8.6, 9.0, and 9.1 before 9.1.1 allows remote attackers to cause a denial of service (CPU consumption) via crafted packets to the SIP TCP port, aka Bug ID CSCua89930.

A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799.

The OPC server in Progea Movicon before 11.3 allows remote attackers to cause a denial of service (out-of-bounds read and memory corruption) via a crafted HTTP request.

The Protocol Translation (PT) functionality in Cisco IOS 12.3 through 12.4 and 15.0 through 15.3, when one-step port-23 translation or a Telnet-to-PAD ruleset is configured, does not properly validate TCP connection information, which allows remote attackers to cause a denial of service (device reload) via an attempted connection to a PT resource, aka Bug ID CSCtz35999.

All versions of Quagga, 0.93 through 1.1.0, are vulnerable to an unbounded memory allocation in the telnet 'vty' CLI, leading to a Denial-of-Service of Quagga daemons, or even the entire host. When Quagga daemons are configured with their telnet CLI enabled, anyone who can connect to the TCP ports can trigger this vulnerability, prior to authentication. Most distributions restrict the Quagga telnet interface to local access only by default. The Quagga telnet interface 'vty' input buffer grows automatically, without bound, so long as a newline is not entered. This allows an attacker to cause the Quagga daemon to allocate unbounded memory by sending very long strings without a newline. Eventually the daemon is terminated by the system, or the system itself runs out of memory. This is fixed in Quagga 1.1.1 and Free Range Routing (FRR) Protocol Suite 2017-01-10.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.

A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455.

A drm driver have oob problem, could cause the system crash or EOPProduct: AndroidVersions: Android SoCAndroid ID: A-233124709

The Smart Install client functionality in Cisco IOS 12.2 and 15.0 through 15.3 on Catalyst switches allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in Smart Install packets, aka Bug ID CSCub55790.

It was found that the Linux kernel's Datagram Congestion Control Protocol (DCCP) implementation before 2.6.22.17 used the IPv4-only inet_sk_rebuild_header() function for both IPv4 and IPv6 DCCP connections, which could result in memory corruptions. A remote attacker could use this flaw to crash the system.

On the Vonage VDV-23 115 3.2.11-0.9.40 home router, sending a long string of characters in the loginPassword and/or loginUsername field to goform/login causes the router to reboot.

Panda Global Protection 17.0.1 allows a system crash via a 0xb3702c04 \\.\PSMEMDriver DeviceIoControl request.

parser.exe in Océ (OCE) 3121/3122 Printer allows remote attackers to cause a denial of service (crash or reboot) via a long request, possibly triggering a buffer overflow.

The device does not properly validate the data being sent to the buffer. An attacker can send a malformed CIP packet to Port 2222/TCP, Port 2222/UDP, Port 44818/TCP, or Port 44818/UDP, which creates a buffer overflow and causes the NIC to crash. Successful exploitation of this vulnerability could cause loss of availability and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

VMware vCenter Server 4.1 before Update 3 and 5.0 before Update 2, and vCSA 5.0 before Update 2, allows remote attackers to cause a denial of service (disk consumption) via vectors that trigger large log entries.

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

In the ihevcd_parse_slice.c function, slave threads are not joined if there is an error. This could lead to a remote denial of service of a critical system process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-64784973.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) Discovery Request parsing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of fields in CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending crafted CAPWAP Discovery Request packets to an affected device. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. Cisco Bug IDs: CSCvb95842.

The device does not properly validate the data being sent to the buffer. An attacker can send a malformed CIP packet to Port 2222/TCP, Port 2222/UDP, Port 44818/TCP, or Port 44818/UDP, which creates a buffer overflow and causes the CPU to crash. Successful exploitation of this vulnerability could cause loss of availability and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

Buffer overflow in Siemens 45 series mobile phones allows remote attackers to cause a denial of service (disconnect and unavailable inbox) via a Short Message Service (SMS) message with a long image name.

The ClamAV AntiVirus software versions 0.99.2 and prior contain a vulnerability that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input validation checking mechanisms during certain mail parsing functions (the rfc2047 function in mbox.c). An unauthenticated, remote attacker could exploit this vulnerability by sending a crafted email to the affected device. This action could cause a buffer overflow condition when ClamAV scans the malicious email, allowing the attacker to potentially cause a DoS condition on an affected device.

Tomcat 4.0 through 4.1.12, using mod_jk 1.2.1 module on Apache 1.3 through 1.3.27, allows remote attackers to cause a denial of service (desynchronized communications) via an HTTP GET request with a Transfer-Encoding chunked field with invalid values.

In FreeBSD before 11.2-RELEASE, a stack guard-page is available but is disabled by default. This results in the possibility a poorly written process could be cause a stack overflow.

Buffer overflow in Microsoft SharePoint Server 2010 SP1 and SharePoint Foundation 2010 SP1 allows remote attackers to cause a denial of service (W3WP process crash and site outage) via a crafted URL, aka "Buffer Overflow Vulnerability."

In FreeBSD before 11.2-RELEASE, multiple issues with the implementation of the stack guard-page reduce the protections afforded by the guard-page. This results in the possibility a poorly written process could be cause a stack overflow.

When an affected product receives a valid CIP message from an unauthorized or unintended source to Port 2222/TCP, Port 2222/UDP, Port 44818/TCP, or Port 44818/UDP that instructs the product to reset, a DoS can occur. This situation could cause loss of availability and a disruption of communication with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

Buffer overflow in Cisco Unified MeetingPlace Web Conferencing before 7.1MR1 Patch 1, 8.0 before 8.0MR1 Patch 1, and 8.5 before 8.5MR3 allows remote attackers to cause a denial of service (daemon hang) via unspecified parameters in a POST request, aka Bug ID CSCua66341.

Samsung NET-i viewer 1.37.120316 allows remote attackers to cause a denial of service (infinite loop) via a negative size value in a TCP request to (1) NiwMasterService or (2) NiwStorageService. NOTE: some of these details are obtained from third party information.

The SIP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.17), 8.3 before 8.3(2.28), 8.4 before 8.4(2.13), 8.5 before 8.5(1.4), and 8.6 before 8.6(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted SIP media-update packet, aka Bug ID CSCtr63728.

The Samsung D6000 TV and possibly other products allow remote attackers to cause a denial of service (continuous restart) via a crafted controller name.

Cisco Unified Presence (CUP) before 8.6(3) and Jabber Extensible Communications Platform (aka Jabber XCP) before 5.3 allow remote attackers to cause a denial of service (process crash) via a crafted XMPP stream header, aka Bug ID CSCtu32832.

The Samsung D6000 TV and possibly other products allows remote attackers to cause a denial of service (crash) via a long string in certain fields, as demonstrated by the MAC address field, possibly a buffer overflow.

The Arbiter Power Sentinel 1133A device with firmware before 11Jun2012 Rev 421 allows remote attackers to cause a denial of service (Ethernet outage) via unspecified Ethernet traffic that fills a buffer, as demonstrated by a port scan.

Siemens SIMATIC S7-400 PN CPU devices with firmware 5.x allow remote attackers to cause a denial of service (defect-mode transition and service outage) via (1) malformed HTTP traffic or (2) malformed IP packets.

The IRM Server in EMC Documentum Information Rights Management 4.x before 4.7.0100 and 5.x before 5.0.1030 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via input data that (1) lacks FIPS fields or (2) has an invalid version number.

Buffer overflow in the embedded web server on the Siemens Scalance X Industrial Ethernet switch X414-3E before 3.7.1, X308-2M before 3.7.2, X-300EEC before 3.7.2, XR-300 before 3.7.2, and X-300 before 3.7.2 allows remote attackers to cause a denial of service (device reboot) or possibly execute arbitrary code via a malformed URL.