The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.

Cross-site scripting vulnerability in CiscoSecure ACS 3.0 allows remote attackers to execute arbitrary script or HTML as other web users via the action argument in a link to setup.exe.

The encryption algorithms for enable and passwd commands on Cisco PIX Firewall can be executed quickly due to a limited number of rounds, which make it easier for an attacker to decrypt the passwords using brute force techniques.

The default configuration of the proxy for Cisco Cache Engine and Content Engine allows remote attackers to use HTTPS to make TCP connections to allowed IP addresses while hiding the actual source IP.

The Cisco Content Services Switch (CSS) 11500 with software 08.20.1.01 conveys authentication data through ClientCert-* headers but does not delete client-supplied ClientCert-* headers, which might allow remote attackers to bypass authentication via crafted header data, as demonstrated by a ClientCert-Subject-CN header, aka Bug ID CSCsz04690.

NDSAuth.DLL in Cisco Secure Authentication Control Server (ACS) 3.0.1 does not check the Expired or Disabled state of users in the Novell Directory Services (NDS), which could allow those users to authenticate to the server.

Cisco IOS Firewall Feature set, aka Context Based Access Control (CBAC) or Cisco Secure Integrated Software, for IOS 11.2P through 12.2T does not properly check the IP protocol type, which could allow remote attackers to bypass access control lists.

RSA BSAFE SSL-J 3.0, 3.0.1 and 3.1, as used in Cisco iCND 2.0, caches session IDs from failed login attempts, which could allow remote attackers to bypass SSL client authentication and gain access to sensitive data by logging in after an initial failure.

Cisco 6400 Access Concentrator Node Route Processor 2 (NRP2) 12.1DC card does not properly disable access when a password has not been set for vtys, which allows remote attackers to obtain access via telnet.

The web management service on Cisco Content Service series 11000 switches (CSS) before WebNS 4.01B29s or WebNS 4.10B17s allows a remote attacker to gain additional privileges by directly requesting the web management URL instead of navigating through the interface.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not support the "fragment" keyword in an outgoing ACL, which could allow fragmented packets in violation of the intended access.

Cisco CBOS 2.3.8 and earlier stores the passwords for (1) exec and (2) enable in cleartext in the NVRAM and a configuration file, which could allow unauthorized users to obtain the passwords and gain privileges.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly handle the implicit "deny ip any any" rule in an outgoing ACL when the ACL contains exactly 448 entries, which can allow some outgoing packets to bypass access restrictions.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly filter does not properly filter packet fragments even when the "fragment" keyword is used in an ACL, which allows remote attackers to bypass the intended access controls.

Cisco switches and routers running CBOS 2.3.8 and earlier use predictable TCP Initial Sequence Numbers (ISN), which allows remote attackers to spoof or hijack TCP connections.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not block non-initial packet fragments, which allows remote attackers to bypass the ACL.

Cisco Aironet 340 Series wireless bridge before 8.55 does not properly disable access to the web interface, which allows remote attackers to modify its configuration.

Cisco Virtual Central Office 4000 (VCO/4K) uses weak encryption to store usernames and passwords in the SNMP MIB, which allows an attacker who knows the community name to crack the password and gain privileges.

CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to bypass LDAP authentication on the server if the LDAP server allows null passwords.

By design, the "established" command on the Cisco PIX firewall allows connections from one host to arbitrary ports of a target host if an alternative conduit has already been allowed, which can cause administrators to configure less restrictive access controls than intended if they do not understand this functionality.

Vulnerability in Cisco IOS 11.1CC and 11.1CT with distributed fast switching (DFS) enabled allows remote attackers to bypass certain access control lists when the router switches traffic from a DFS-enabled interface to an interface that does not have DFS enabled, as described by Cisco bug CSCdk35564.

Check Point Firewall-1 allows remote attackers to bypass port access restrictions on an FTP server by forcing it to send malicious packets that Firewall-1 misinterprets as a valid 227 response to a client's PASV attempt.

Cisco routers 9.17 and earlier allow remote attackers to bypass security restrictions via certain IP source routed packets that should normally be denied using the "no ip source-route" command.

jmx-console/HtmlAdaptor in the jmx-console in the JBoss web application server, as shipped with Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.2.1, allows remote attackers to gain privileges as the CS-MARS administrator and execute arbitrary Java code via an invokeOp action in the BSHDeployer jboss.scripts service name.

Cisco 675 routers running CBOS allow remote attackers to establish telnet sessions if an exec or superuser password has not been set.

The HTTP server in Cisco 7xx series routers 3.2 through 4.2 is enabled by default, which allows remote attackers to change the router's configuration.

Cisco Catalyst 2900 Virtual LAN (VLAN) switches allow remote attackers to inject 802.1q frames into another VLAN by forging the VLAN identifier in the trunking tag.

Some classic Cisco IOS devices have a vulnerability in the PPP CHAP authentication to establish unauthorized PPP connections.

In Cisco IOS 10.3, with the tacacs-ds or tacacs keyword, an extended IP access control list could bypass filtering.

The internal database in Cisco Wireless Control System (WCS) for Linux and Windows before 3.2(51) uses an undocumented, hard-coded username and password, which allows remote authenticated users to read, and possibly modify, sensitive configuration data (aka bugs CSCsd15955).

On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd.

Buffer overflow in Cisco Unified CallManager (CUCM) 5.0(1) through 5.0(3a) allows remote attackers to execute arbitrary code via a long hostname in a SIP request, aka bug CSCsd96542.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

Cisco VPN 3000 Concentrator 3.6(Rel) and earlier, and 2.x.x, when configured to use internal authentication with group accounts and without any user accounts, allows remote VPN clients to log in using PPTP or IPSEC user authentication.

Cisco Secure Access Control Server (ACS) 3.2(3) and earlier, when configured with an anonymous bind in Novell Directory Services (NDS) and authenticating NDS users with NDS, allows remote attackers to gain unauthorized access to AAA clients via a blank password.

The mailguard feature in Cisco Secure PIX Firewall 5.2(2) and earlier does not properly restrict access to SMTP commands, which allows remote attackers to execute restricted commands by sending a DATA command before sending the restricted commands.

A vulnerability in the Virtual Network Computing (VNC) console implementation of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to access the VNC console session of an administrative user on an affected device. The vulnerability is due to an insufficient authentication mechanism used to establish a VNC session. An attacker could exploit this vulnerability by intercepting an administrator VNC session request prior to login. A successful exploit could allow the attacker to watch the administrator console session or interact with it, allowing admin access to the affected device.

Vulnerability in Cisco IOS 11.1 through 11.3 with distributed fast switching (DFS) enabled allows remote attackers to bypass certain access control lists when the router switches traffic from a DFS-enabled input interface to an output interface with a logical subinterface, as described by Cisco bug CSCdk43862.

Vulnerability in Cisco routers versions 8.2 through 9.1 allows remote attackers to bypass access control lists when extended IP access lists are used on certain interfaces, the IP route cache is enabled, and the access list uses the "established" keyword.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code. The vulnerability exists because the software improperly validates user-supplied input during user authentication. An attacker could exploit this vulnerability by connecting to an affected device using HTTP and supplying malicious user credentials. A successful exploit could allow the attacker to trigger a reload of an affected device, resulting in a DoS condition, or to execute arbitrary code with the privileges of the app user. Cisco fixed this vulnerability in the following SIP Software releases: 10.3(1)SR5 and later for Cisco Unified IP Conference Phone 8831; 11.0(4)SR3 and later for Cisco Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 and later for the rest of the Cisco IP Phone 7800 Series and 8800 Series.

The Cisco Content Services Switch (CSS) 11500 with software 8.20.4.02 and the Application Control Engine (ACE) 4710 with software A2(3.0) do not properly handle LF header terminators in situations where the GET line is terminated by CRLF, which allows remote attackers to conduct HTTP request smuggling attacks and possibly bypass intended header insertions via crafted header data, as demonstrated by an LF character between the ClientCert-Subject and ClientCert-Subject-CN headers. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-1576.

A vulnerability in the sysadmin virtual machine (VM) on Cisco ASR 9000 Series Aggregation Services Routers running Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to access internal applications running on the sysadmin VM. The vulnerability is due to incorrect isolation of the secondary management interface from internal sysadmin applications. An attacker could exploit this vulnerability by connecting to one of the listening internal applications. A successful exploit could result in unstable conditions, including both a denial of service and remote unauthenticated access to the device. This vulnerability has been fixed in Cisco IOS XR 64-bit Software Release 6.5.3 and 7.0.1, which will edit the calvados_boostrap.cfg file and reload the device.

AAA authentication on Cisco systems allows attackers to execute commands without authorization.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Cisco switches and routers running IOS 12.1 and earlier produce predictable TCP Initial Sequence Numbers (ISNs), which allows remote attackers to spoof or hijack TCP connections.

Cisco PIX Private Link 4.1.6 and earlier does not properly process certain commands in the configuration file, which reduces the effective key length of the DES key to 48 bits instead of 56 bits, which makes it easier for an attacker to find the proper key via a brute force attack.

Web Cache Control Protocol (WCCP) in Cisco Cache Engine for Cisco IOS 11.2 and earlier does not use authentication, which allows remote attackers to redirect HTTP traffic to arbitrary hosts via WCCP packets to UDP port 2048.

Use-after-free vulnerability in decode_slice.cpp in Cisco OpenH264 1.2.0 and earlier allows remote attackers to execute arbitrary code via an encoded media file.

Cisco Secure ACS does not require authentication when Cisco Trust Agent (CTA) transmits posture information, which might allow remote attackers to gain network access via a spoofed Network Endpoint Assessment posture, aka "NACATTACK." NOTE: this attack might be limited to authenticated users and devices.