Trendnet TEW733GR v1.03B01 contains a Static Default Credential vulnerability in /etc/init0.d/S80telnetd.sh.

Adobe FrameMaker Publishing Server versions 2022.1 and earlier are affected by an Improper Authentication vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass authentication mechanisms and gain unauthorized access. Exploitation of this issue does not require user interaction.

ControlID iDSecure On-premises versions 4.7.48.0 and prior are vulnerable to an improper authentication vulnerability which could allow an attacker to bypass authentication and gain permissions in the product.

A vulnerability in the Security Assertion Markup Language (SAML) APIs of Cisco Catalyst SD-WAN Manager Software could allow an unauthenticated, remote attacker to gain unauthorized access to the application as an arbitrary user. This vulnerability is due to improper authentication checks for SAML APIs. An attacker could exploit this vulnerability by sending requests directly to the SAML API. A successful exploit could allow the attacker to generate an authorization token sufficient to gain access to the application.

Unauthenticated RCE in HPE Insight Cluster Management Utility

In OPPO Store APP, there's a possible escalation of privilege due to improper input validation.

An issue was discovered in Fanvil x210 V2 2.12.20 allowing unauthenticated attackers on the local network to access administrative functions of the device (e.g. file upload, firmware update, reboot...) via a crafted authentication bypass.

A vulnerability in the protocol detection component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper detection of the initial use of a protocol on a nonstandard port. An attacker could exploit this vulnerability by sending traffic on a nonstandard port for the protocol in use through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems that would otherwise be blocked. Once the initial protocol flow on the nonstandard port is detected, future flows on the nonstandard port will be successfully detected and handled as configured by the applied policy.

An issue was discovered on Samsung mobile devices with O(8.x) and P(9.0) software. Attackers can change the USB configuration without authentication. The Samsung ID is SVE-2018-13300 (September 2019).

DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.10, secret verification does not take effect successfully, so a user can use any secret to forge a JWT token. The vulnerability has been fixed in v2.10.10. No known workarounds are available.

The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts.

On Aspire-derived NEC PBXes, including all versions of SV8100 devices, a set of documented, static login credentials may be used to access the DIM interface.

An issue was discovered in Mattermost Server before 5.9.0, 5.8.1, 5.7.3, and 4.10.8. It allows a password reset to proceed while an e-mail address is being changed.

The ZM Ajax Login & Register plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.0.2. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

Starting from 2.53.6, 2.54.3, and 2.55.0, Zitadel only required multi factor authentication in case the login policy has either enabled requireMFA or requireMFAForLocalUsers. If a user has set up MFA without this requirement, Zitadel would consider single factor auhtenticated sessions as valid as well and not require multiple factors. Bypassing second authentication factors weakens multifactor authentication and enables attackers to bypass the more secure factor. An attacker can target the TOTP code alone, only six digits, bypassing password verification entirely and potentially compromising accounts with 2FA enabled. This vulnerability is fixed in 4.6.0, 3.4.3, and 2.71.18.

In MIELE XGW 3000 ZigBee Gateway before 2.4.0, the Password Change Function does not require knowledge of the old password. This can be exploited in conjunction with CVE-2019-20480.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

InfluxDB before 1.7.6 has an authentication bypass vulnerability in the authenticate function in services/httpd/handler.go because a JWT token may have an empty SharedSecret (aka shared secret).

A vulnerability was found in SourceCodester Online Pizza Ordering System 1.0. It has been classified as critical. This affects an unknown part of the file admin/ajax.php?action=save_user of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The identifier VDB-223305 was assigned to this vulnerability.

This vulnerability exists in GajShield Data Security Firewall firmware versions prior to v4.28 (except v4.21) due to insecure default credentials which allows remote attacker to login as superuser by using default username/password via web-based management interface and/or exposed SSH port thereby enabling remote attackers to execute arbitrary commands with administrative/superuser privileges on the targeted systems. The vulnerability has been addressed by forcing the user to change their default password to a new non-default password.

A vulnerability, which was classified as critical, was found in SourceCodester Medicine Tracker System 1.0. This affects an unknown part of the file Users.php?f=save_user. The manipulation of the argument firstname/middlename/lastname/username/password leads to improper authentication. It is possible to initiate the attack remotely. The associated identifier of this vulnerability is VDB-223311.

Authentication Bypass by Alternate Name vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.

Improper Authentication vulnerability in B&R Industrial Automation B&R VC4 (VNC-Server modules).  This vulnerability may allow an unauthenticated network-based attacker to bypass the authentication mechanism of the VC4 visualization on affected devices. The impact of this vulnerability depends on the functionality provided in the visualization. This issue affects B&R VC4: from 3.* through 3.96.7, from 4.0* through 4.06.7, from 4.1* through 4.16.3, from 4.2* through 4.26.8, from 4.3* through 4.34.6, from 4.4* through 4.45.1, from 4.5* through 4.45.3, from 4.7* through 4.72.9.

A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.

Authentication Bypass by Primary Weakness vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.

The WordPress plugin, Email Subscribers & Newsletters, before 4.2.3 had a flaw that allowed for unauthenticated option creation. In order to exploit this vulnerability, an attacker would need to send a /wp-admin/admin-post.php?es_skip=1&option_name= request.

An issue was discovered on Samsung mobile devices with P(9.0) software. The Pin Window feature allows unauthenticated unpinning of an app. The Samsung ID is SVE-2018-13765 (March 2019).

The vulnerability exists in Uniview IP Camera due to identification and authentication failure at its web-based management interface. A remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable device. Successful exploitation of this vulnerability could allow the attacker to gain complete control of the targeted device.

Blue Access Cobalt v02.000.195 suffers from an authentication bypass vulnerability, which allows an attacker to selectively proxy requests in order to operate functionality on the web application without the need to authenticate with legitimate credentials.

handleIncomingPacket in conn.go in Pion DTLS before 1.5.2 lacks a check for application data with epoch 0, which allows remote attackers to inject arbitrary unencrypted data after handshake completion.

Improper Authentication in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

An issue was discovered on Samsung mobile devices with P(9.0) software. The Settings application allows unauthenticated changes. The Samsung IDs are SVE-2019-13814, SVE-2019-13815 (March 2019).

Aspire-derived NEC PBXes, including the SV8100, SV9100, SL1100 and SL2100 with software releases 7.0 or higher contain the possibility if incorrectly configured to allow a blank username and password combination to be entered as a valid, successfully authenticating account.

MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).

BlogPHP 2.0 allows remote attackers to bypass authentication, and post (1) messages or (2) comments as an arbitrary user, via a modified blogphp_username field in a cookie.

An issue was discovered in Serpico (aka SimplE RePort wrIting and CollaboratiOn tool) 1.3.0. An admin can change their password without providing the current password, by using interfaces outside the Change Password screen. Thus, requiring the admin to enter an Old Password value on the Change Password screen does not enhance security. This is problematic in conjunction with XSS.

The Synergy Systems & Solutions PLC & RTU system has a vulnerability in HUSKY RTU 6049-E70 firmware versions 5.0 and prior. The affected product does not require adequate authentication, which may allow an attacker to read sensitive information or execute arbitrary code. This is a different issue than CVE-2019-16879 and CVE-2019-20045.

Session fixation vulnerability in eXV2 CMS 2.0.4.3 and earlier allows remote attackers to hijack web sessions by setting the PHPSESSID cookie.

On certain TOTOLINK Realtek SDK based routers, the CAPTCHA text can be retrieved via an {"topicurl":"setting/getSanvas"} POST to the boafrm/formLogin URI, leading to a CAPTCHA bypass. (Also, the CAPTCHA text is not needed once the attacker has determined valid credentials. The attacker can perform router actions via HTTP requests with Basic Authentication.) This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0.

The json-jwt gem before 1.11.0 for Ruby lacks an element count during the splitting of a JWE string.

Vulnerability in the Oracle Concurrent Processing product of Oracle E-Business Suite (component: BI Publisher Integration). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Concurrent Processing. Successful attacks of this vulnerability can result in takeover of Oracle Concurrent Processing. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

HTCondor up to and including stable series 8.8.6 and development series 8.9.4 has Incorrect Access Control. It is possible to use a different authentication method to submit a job than the administrator has specified. If the administrator has configured the READ or WRITE methods to include CLAIMTOBE, then it is possible to impersonate another user to the condor_schedd. (For example to submit or remove jobs)

libc in OpenBSD 6.6 allows authentication bypass via the -schallenge username, as demonstrated by smtpd, ldapd, or radiusd. This is related to gen/auth_subr.c and gen/authenticate.c in libc (and login/login.c and xenocara/app/xenodm/greeter/verify.c).

An issue was discovered in Mellium mellium.im/sasl before 0.3.1. When performing SCRAM-based SASL authentication, if the remote end advertises support for channel binding, no random nonce is generated (instead, the nonce is empty). This causes authentication to fail in the best case, but (if paired with a remote end that does not validate the length of the nonce) could lead to insufficient randomness being used during authentication.

The Paid Membership Subscriptions – Effortless Memberships, Recurring Payments & Content Restriction plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 2.13.7. This is due to the pms_pb_payment_redirect_link function using the user-controlled value supplied via the 'pms_payment_id' parameter to authenticate users without any further identity validation. This makes it possible for unauthenticated attackers with knowledge of a valid payment ID to log in as any user who has made a purchase on the targeted site.

An issue in the component global.so of Totolink A830R V4.1.2cu.5182 allows attackers to bypass authentication via a crafted cookie.

Sangoma FreePBX 115.0.16.26 and below, 14.0.13.11 and below, 13.0.197.13 and below have Incorrect Access Control.

In jpv (aka Json Pattern Validator) before 2.1.1, compareCommon() can be bypassed because certain internal attributes can be overwritten via a conflicting name, as demonstrated by 'constructor': {'name':'Array'}. This affects validate(). Hence, a crafted payload can overwrite this builtin attribute to manipulate the type detection result.

CA Automic Sysload 5.6.0 through 6.1.2 contains a vulnerability, related to a lack of authentication on the File Server port, that potentially allows remote attackers to execute arbitrary commands.

Permission vulnerability in the mobile application (com.afmobi.boomplayer) may lead to the risk of unauthorized operation.