In OPPOStore iOS App, there's a possible escalation of privilege due to improper input validation.

A remote code execution vulnerability in the webview component of OnePlus Store app.

There is a command injection problem in the old version of the mobile phone backup app.

A remote code execution vulnerability in the webview component of OPPO Store app.

HGiga MailSherlock contains weak authentication flaw that attackers grant privilege remotely with default password generation mechanism.

In SaltStack Salt through 3002, salt-netapi improperly validates eauth credentials and tokens. A user can bypass authentication and invoke Salt SSH.

An issue was discovered in Zammad before 3.4.1. There is an authentication bypass in the SSO endpoint via a crafted header, when SSO is not configured. An attacker can create a valid and authenticated session that can be used to perform any actions in the name of other users.

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

An access control issue in H3C A210-G A210-GV100R005 allows attackers to authenticate without a password.

The UserPro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.1. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. An attacker can leverage CVE-2023-2448 and CVE-2023-2446 to get the user's email address to successfully exploit this vulnerability.

Improper Authentication vulnerability in Apache Software Foundation Apache IoTDB.This issue affects Apache IoTDB Grafana Connector: from 0.13.0 through 0.13.3. Attackers could login without authorization. This is fixed in 0.13.4.

The RegistrationMagic plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.2.1.0. This is due to insufficient verification on the user being supplied during a Google social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

An authentication bypass vulnerability exists in the httpd nvram.cgi functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

Use of default password vulnerability in PowerPanel Business Local/Remote for Windows v4.8.6 and earlier, PowerPanel Business Management for Windows v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 32bit v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 64bit v4.8.6 and earlier, PowerPanel Business Management for Linux 32bit v4.8.6 and earlier, PowerPanel Business Management for Linux 64bit v4.8.6 and earlier, PowerPanel Business Local/Remote for MacOS v4.8.6 and earlier, and PowerPanel Business Management for MacOS v4.8.6 and earlier allows remote attackers to log in to the server directly to perform administrative functions. Upon installation or upon first login, the application does not ask the user to change the 'admin' password.

Apache Shiro before 1.7.0, when using Apache Shiro with Spring, a specially crafted HTTP request may cause an authentication bypass.

It is possible to enumerate access card credentials via an unauthenticated network connection to the server in versions of Command Centre v8.20 prior to v8.20.1166(MR3), versions of 8.10 prior to v8.10.1211(MR5), versions of 8.00 prior to v8.00.1228(MR6), all versions of 7.90 and earlier. These credentials can then be used to encode low security cards to be used by the system where insecure card technologies are supported.

ConnectWise Automate through 2020.x has insufficient validation on certain authentication paths, allowing authentication bypass via a series of attempts. This was patched in 2020.7 and in a hotfix for 2019.12.

Priority Web version 19.1.0.68, parameter manipulation on an unspecified end-point may allow authentication bypass.

The Profile Builder – User Profile & User Registration Forms plugin for WordPress is vulnerable to unauthorized password resets in versions up to, and including 3.9.0. This is due to the plugin using native password reset functionality, with insufficient validation on the password reset function (wppb_front_end_password_recovery). The function uses the plaintext value of a password reset key instead of a hashed value which means it can easily be retrieved and subsequently used. An attacker can leverage CVE-2023-0814, or another vulnerability like SQL Injection in another plugin or theme installed on the site to successfully exploit this vulnerability.

Use of Password Hash Instead of Password for Authentication in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows an unprivileged remote attacker to use a password hash instead of an actual password to login to a valid user account via the REST interface.

The client in OpenSSH before 7.2 mishandles failed cookie generation for untrusted X11 forwarding and relies on the local X11 server for access-control decisions, which allows remote X11 clients to trigger a fallback and obtain trusted X11 forwarding privileges by leveraging configuration issues on this X11 server, as demonstrated by lack of the SECURITY extension on this X11 server.

OpenClinic GA versions 5.09.02 and 5.89.05b contain an authentication mechanism within the system that does not provide sufficient complexity to protect against brute force attacks, which may allow unauthorized users to access the system after no more than a fixed maximum number of attempts.

OpenClinic GA versions 5.09.02 and 5.89.05b may allow an attacker to bypass client-side access controls or use a crafted request to initiate a session with limited functionality, which may allow execution of admin functions such as SQL queries.

Varnish 2.0.6 writes data to a log file without sanitizing non-printable characters, which might allow remote attackers to modify a window's title, or possibly execute arbitrary commands or overwrite files, via an HTTP request containing an escape sequence for a terminal emulator. NOTE: the vendor disputes the significance of this report, stating that "This is not a security problem in Varnish or any other piece of software which writes a logfile. The real problem is the mistaken belief that you can cat(1) a random logfile to your terminal safely.

Veritas APTARE versions prior to 10.4 included code that bypassed the normal login process when specific authentication credentials were provided to the server.

An improper authentication vulnerability in SSL VPN in FortiOS 6.4.0, 6.2.0 to 6.2.3, 6.0.9 and below may result in a user being able to log in successfully without being prompted for the second factor of authentication (FortiToken) if they changed the case of their username.

Improper Authentication vulnerability in Microchip TimeProvider 4100 (login modules) allows Session Hijacking.This issue affects TimeProvider 4100: from 1.0 before 2.4.7.

In IQrouter through 3.3.1, there is a root user without a password, which allows attackers to gain full remote access via SSH. Note: The vendor claims that this vulnerability can only occur on a brand-new network that, after initiating the forced initial configuration (which has a required step for setting a secure password on the system), makes this CVE invalid. This vulnerability is “true for any unconfigured release of OpenWRT, and true of many other new Linux distros prior to being configured for the first time”

Silver Peak Unity Orchestrator versions prior to 8.9.11+, 8.10.11+, or 9.0.1+ uses HTTP headers to authenticate REST API calls from localhost. This makes it possible to log in to Orchestrator by introducing an HTTP HOST header set to 127.0.0.1 or localhost. Orchestrator instances that are hosted by customers –on-premise or in a public cloud provider –are affected by this vulnerability.

3xLOGIC Infinias eIDC32 2.213 devices with Web 1.107 allow Authentication Bypass via CMD.HTM?CMD= because authentication depends on the client side's interpretation of the <KEY>MYKEY</KEY> substring.

Multiple authentication bypass vulnerabilities in the /cgi-bin/ endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allow an attacker to leak router settings, change configuration variables, and cause denial of service via an unauthenticated endpoint.

Improper authentication of Non-EAPOL/WAPI plaintext frames during four-way handshake can lead to arbitrary network packet injection in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music

An issue was discovered in Mattermost Server before 3.0.0. A password-reset link could be reused.

IRC5 exposes an ftp server (port 21). Upon attempting to gain access you are challenged with a request of username and password, however you can input whatever you like. As long as the field isn't empty it will be accepted.

After performing a sequence of Power FW950, FW1010 maintenance operations a SRIOV network adapter can be improperly configured leading to desired VEPA configuration being disabled. IBM X-Force ID: 229695.

This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.

TP-Link SG105PE firmware prior to 'TL-SG105PE(UN) 1.0_1.0.0 Build 20221208' contains an authentication bypass vulnerability. Under the certain conditions, an attacker may impersonate an administrator of the product. As a result, information may be obtained and/or the product's settings may be altered with the privilege of the administrator.

Sierra Wireless AirLink Mobility Manager (AMM) before 2.17 mishandles sessions and thus an unauthenticated attacker can obtain a login session with administrator privileges.

An issue was discovered in Epikur before 20.1.1. The Epikur server contains the checkPasswort() function that, upon user login, checks the submitted password against the user password's MD5 hash stored in the database. It is also compared to a second MD5 hash, which is the same for every user (aka a "Backdoor Password" of 3p1kursupport). If the submitted password matches either one, access is granted.

The Plus Addons for Elementor Page Builder WordPress plugin before 4.1.7 was being actively exploited to by malicious actors to bypass authentication, allowing unauthenticated users to log in as any user (including admin) by just providing the related username, as well as create accounts with arbitrary roles, such as admin. These issues can be exploited even if registration is disabled, and the Login widget is not active.

An issue was discovered on Dasan GPON home routers. It is possible to bypass authentication simply by appending "?images" to any URL of the device that requires authentication, as demonstrated by the /menu.html?images/ or /GponForm/diag_FORM?images/ URI. One can then manage the device.

A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.

A vulnerability was found in SourceCodester Online Pizza Ordering System 1.0. It has been classified as critical. This affects an unknown part of the file admin/ajax.php?action=save_user of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The identifier VDB-223305 was assigned to this vulnerability.

A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

The ZM Ajax Login & Register plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.0.2. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

A vulnerability in the Security Assertion Markup Language (SAML) APIs of Cisco Catalyst SD-WAN Manager Software could allow an unauthenticated, remote attacker to gain unauthorized access to the application as an arbitrary user. This vulnerability is due to improper authentication checks for SAML APIs. An attacker could exploit this vulnerability by sending requests directly to the SAML API. A successful exploit could allow the attacker to generate an authorization token sufficient to gain access to the application.

BIG-IP configurations using Active Directory, LDAP, or Client Certificate LDAP for management authentication with multiple servers are exposed to a vulnerability which allows an authentication bypass. This can result in a complete compromise of the system. This issue only impacts specific engineering hotfixes using the aforementioned authentication configuration. NOTE: This vulnerability does not affect any of the BIG-IP major, minor or maintenance releases you obtained from downloads.f5.com. The affected Engineering Hotfix builds are as follows: Hotfix-BIGIP-14.1.0.3.0.79.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.97.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.99.6-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.15.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.36.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.40.5-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.11.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.14.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.68.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.70.9-ENG.iso, Hotfix-BIGIP-14.1.2.0.11.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.18.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.32.37-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.46.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.14.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.16.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.34.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.97.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.99.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.105.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.111.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.115.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.122.4-ENG.iso, Hotfix-BIGIP-15.0.1.0.33.11-ENG.iso, Hotfix-BIGIP-15.0.1.0.48.11-ENG.iso

A CWE-287: Improper Authentication vulnerability exists in the NET55XX Encoder with firmware prior to version 2.1.9.7 which could cause impact to confidentiality, integrity, and availability when a remote attacker crafts a malicious request to the encoder webUI.