Some HTTP/2 implementations are vulnerable to resource loops, potentially leading to a denial of service. The attacker creates multiple request streams and continually shuffles the priority of the streams in a way that causes substantial churn to the priority tree. This can consume excess CPU.

Some HTTP/2 implementations are vulnerable to unconstrained interal data buffering, potentially leading to a denial of service. The attacker opens the HTTP/2 window so the peer can send without constraint; however, they leave the TCP window closed so the peer cannot actually write (many of) the bytes on the wire. The attacker then sends a stream of requests for a large response object. Depending on how the servers queue the responses, this can consume excess memory, CPU, or both.

Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

In Message and toBundle of Notification.java, there is a possible resource exhaustion due to improper input validation. This could lead to remote denial of service requiring a device reset to fix with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-8.0 Android-8.1 Android-9 Android-10Android ID: A-158304295

SEL AcSELerator Architect version 2.2.24.0 and prior can be exploited when the AcSELerator Architect FTP client connects to a malicious FTP server, which may cause denial of service via 100% CPU utilization. Restart of the application is required.

A vulnerability in MikroTik Version 6.41.4 could allow an unauthenticated remote attacker to exhaust all available CPU and all available RAM by sending a crafted FTP request on port 21 that begins with many '\0' characters, preventing the affected router from accepting new FTP connections. The router will reboot after 10 minutes, logging a "router was rebooted without proper shutdown" message.

An exploitable denial-of-service vulnerability exists in the Weave daemon of the Nest Cam IQ Indoor, version 4620002. A set of TCP connections can cause unrestricted resource allocation, resulting in a denial of service. An attacker can connect multiple times to trigger this vulnerability.

There is a possible denial of service vulnerability in Action View (Rails) <5.2.2.1, <5.1.6.2, <5.0.7.2, <4.2.11.1 where specially crafted accept headers can cause action view to consume 100% cpu and make the server unresponsive.

Handlebars before 4.4.5 allows Regular Expression Denial of Service (ReDoS) because of eager matching. The parser may be forced into an endless loop while processing crafted templates. This may allow attackers to exhaust system resources.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.

Sandstorm Cap'n Proto before 0.4.1.1 and 0.5.x before 0.5.1.2, when an application invokes the totalSize method on an object reader, allows remote peers to cause a denial of service (CPU consumption) via a crafted small message, which triggers a "tight" for loop. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-2312.

Sandstorm Cap'n Proto before 0.4.1.1 and 0.5.x before 0.5.1.1 allows remote peers to cause a denial of service (CPU and possibly general resource consumption) via a list with a large number of elements.

A vulnerability has been identified in SIMATIC S7-300 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V3.X.17), SIMATIC TDC CP51M1 (All versions < V1.1.8), SIMATIC TDC CPU555 (All versions < V1.1.1), SINUMERIK 840D sl (All versions < V4.8.6), SINUMERIK 840D sl (All versions < V4.94). Specially crafted packets sent to port 102/tcp (Profinet) could cause the affected device to go into defect mode. A restart is required in order to recover the system. Successful exploitation requires an attacker to have network access to port 102/tcp, with no authentication. No user interation is required. At the time of advisory publication no public exploitation of this security vulnerability was known.

The VNC websocket frame decoder in QEMU allows remote attackers to cause a denial of service (memory and CPU consumption) via a large (1) websocket payload or (2) HTTP headers section.

A vulnerability in the filesystem resource management code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to exhaust filesystem resources on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to ineffective management of the underlying filesystem resources. An attacker could exploit this vulnerability by performing specific actions that result in messages being sent to specific operating system log files. A successful exploit could allow the attacker to exhaust available filesystem space on an affected device. This could cause the device to crash and reload, resulting in a DoS condition for clients whose network traffic is transiting the device. Upon reload of the device, the impacted filesystem space is cleared, and the device will return to normal operation. However, continued exploitation of this vulnerability could cause subsequent forced crashes and reloads, which could lead to an extended DoS condition.

Huawei USG9560/9520/9580 before V300R001C01SPC300 allows remote attackers to cause a memory leak or denial of service (memory exhaustion, reboot and MPU switchover) via a crafted website.

Sony Bravia Smart TV devices allow remote attackers to cause a denial of service (device hang or reboot) via a SYN flood attack over a wired or Wi-Fi LAN.

The web api server on Port 8080 of ASUS HG100 firmware up to 1.05.12, which is vulnerable to Slowloris HTTP Denial of Service: an attacker can cause a Denial of Service (DoS) by sending headers very slowly to keep HTTP or HTTPS connections and associated resources alive for a long period of time. CVSS 3.0 Base score 7.4 (Availability impacts). CVSS vector: (CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H).

GE Multilink ML800, ML1200, ML1600, and ML2400 switches with firmware 4.2.1 and earlier and Multilink ML810, ML3000, and ML3100 switches with firmware 5.2.0 and earlier allow remote attackers to cause a denial of service (resource consumption or reboot) via crafted packets.

An error when processing the EXIF_IFD_INTEROPERABILITY and EXIF_IFD_EXIF tags within libexif version 0.6.21 can be exploited to exhaust available CPU resources.

The tcp_rcv_state_process function in net/ipv4/tcp_input.c in the Linux kernel before 3.2.24 allows remote attackers to cause a denial of service (kernel resource consumption) via a flood of SYN+FIN TCP packets, a different vulnerability than CVE-2012-2663.

The image rendering component (createGenericPreview) of the Open Whisper Signal app through 2.29.0 for iOS fails to check for unreasonably large images before manipulating received images. This allows for a large image sent to a user to exhaust all available memory when the image is displayed, resulting in a forced restart of the device.

A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition.

A vulnerability was found in openvswitch. A limitation in the implementation of userspace packet parsing can allow a malicious user to send a specially crafted packet causing the resulting megaflow in the kernel to be too wide, potentially causing a denial of service. The highest threat from this vulnerability is to system availability.

A vulnerability in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) on an affected device. The vulnerability is due to improper resource management while processing specific packets. An attacker could exploit this vulnerability by sending a series of crafted UDP packets to a specific port on an affected device. A successful exploit could either allow the attacker to tear down the connection between the AP and the wireless LAN controller, resulting in the affected device not being able to process client traffic, or cause the vulnerable device to reload, triggering a DoS condition. After the attack, the affected device should automatically recover its normal functions without manual intervention.

Pexip Infinity before 18 allows Remote Denial of Service (TLS handshakes in RTMP).

Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823.

Samsung Note devices with KK(4.4), L(5.0/5.1), and M(6.0) software allow attackers to crash the system by creating an arbitrarily large number of active VR service threads. The Samsung ID is SVE-2016-7650.

A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.

ZyXEL P-660HW v3 devices allow remote attackers to cause a denial of service (CPU consumption) via a flood of IP packets with a TTL of 1.

In Wireshark 2.4.0 to 2.4.1 and 2.2.0 to 2.2.9, the MBIM dissector could crash or exhaust system memory. This was addressed in epan/dissectors/packet-mbim.c by changing the memory-allocation approach.

In bta_scan_results_cb_impl of btif_ble_scanner.cc, there is possible resource exhaustion if a large number of repeated BLE scan results are received. This could lead to a remote denial of service of a critical system process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 8.0. Android ID: A-65174158.

FON2601E-SE, FON2601E-RE, FON2601E-FSW-S, and FON2601E-FSW-B with firmware versions 1.1.7 and earlier contain an issue where they may behave as open resolvers. If this vulnerability is exploited, FON routers may be leveraged for DNS amplification attacks to some other entities.

IBM Cognos Analytics 11.0, and 11.1 is vulnerable to a denial of service attack that could allow a remote user to send specially crafted requests that would consume all available CPU and memory resources. IBM X-Force ID: 158973.

A vulnerability in the Secure Sockets Layer (SSL) packet reassembly functionality of the detection engine in Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the detection engine to consume excessive system memory on an affected device, which could cause a denial of service (DoS) condition. The vulnerability is due to the affected software improperly handling changes to SSL connection states. An attacker could exploit this vulnerability by sending crafted SSL connections through an affected device. A successful exploit could allow the attacker to cause the detection engine to consume excessive system memory on the affected device, which could cause a DoS condition. The device may need to be reloaded manually to recover from this condition. This vulnerability affects Cisco Firepower System Software Releases 6.0.0 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Firewalls with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, Firepower 4100 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower 9300 Series Security Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower Threat Defense Virtual for VMware, Industrial Security Appliance 3000, Sourcefire 3D System Appliances. Cisco Bug IDs: CSCve23031.

A Junos device with VPLS routing-instances configured on one or more interfaces may be susceptible to an mbuf leak when processing a specific MPLS packet. Approximately 1 mbuf is leaked per each packet processed. The number of mbufs is platform dependent. The following command provides the number of mbufs that are currently in use and maximum number of mbufs that can be allocated on a platform: > show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs it will become inaccessible and a restart will be required. This issue only affects end devices, transit devices are not affected. Affected releases are Juniper Networks Junos OS with VPLS configured running: 12.1X46 versions prior to 12.1X46-D76; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F2-S19, 15.1F6-S10, 15.1R4-S9, 15.1R5-S7, 15.1R6-S4, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 15.1X53 versions prior to 15.1X53-D66 on QFX10; 16.1 versions prior to 16.1R3-S8, 16.1R4-S6, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S6, 17.1R3; 17.2 versions prior to 17.2R1-S5, 17.2R2.