Untrusted search path vulnerability in dbmsrv in SAP MaxDB 7.6.03.15 on Linux allows local users to gain privileges via a modified PATH environment variable.
The z90crypt_unlocked_ioctl function in the z90crypt driver in the Linux kernel 2.6.9 does not perform a capability check for the Z90QUIESCE operation, which allows local users to leverage euid 0 privileges to force a driver outage.
The exit_notify function in kernel/exit.c in the Linux kernel before 2.6.30-rc1 does not restrict exit signals when the CAP_KILL capability is held, which allows local users to send an arbitrary signal to a process by running a program that modifies the exit_signal field and then uses an exec system call to launch a setuid application.
The (1) sparc_mmap_check function in arch/sparc/kernel/sys_sparc.c and the (2) sparc64_mmap_check function in arch/sparc64/kernel/sys_sparc.c, in the Linux kernel 2.4 before 2.4.36.5 and 2.6 before 2.6.25.3, omit some virtual-address range (aka span) checks when the mmap MAP_FIXED bit is not set, which allows local users to cause a denial of service (panic) via unspecified mmap calls.
Adobe Flash Player 9.x up to 9.0.48.0, 8.x up to 8.0.35.0, and 7.x up to 7.0.70.0, when running on Linux, uses insecure permissions for memory, which might allow local users to gain privileges.
The CIFS filesystem in the Linux kernel before 2.6.22, when Unix extension support is enabled, does not honor the umask of a process, which allows local users to gain privileges.
Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042
Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042
Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042
If LD_LIBRARY_PATH is undefined in gargoyle-free before 2009-08-25, the variable will point to the current directory. This can allow a local user to trick another user into running gargoyle in a directory with a cracked libgarglk.so and gain access to the user's account.
Linux PV device frontends vulnerable to attacks by backends T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. blkfront: CVE-2022-23036 netfront: CVE-2022-23037 scsifront: CVE-2022-23038 gntalloc: CVE-2022-23039 xenbus: CVE-2022-23040 blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. CVE-2022-23041 netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend. CVE-2022-23042
Race condition in the find_keyring_by_name function in security/keys/keyring.c in the Linux kernel 2.6.34-rc5 and earlier allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact via keyctl session commands that trigger access to a dead keyring that is undergoing deletion by the key_cleanup function.
In Eclipse Jetty versions 1.0 thru 9.4.32.v20200930, 10.0.0.alpha1 thru 10.0.0.beta2, and 11.0.0.alpha1 thru 11.0.0.beta2O, on Unix like systems, the system's temporary directory is shared between all users on that system. A collocated user can observe the process of creating a temporary sub directory in the shared temporary directory and race to complete the creation of the temporary subdirectory. If the attacker wins the race then they will have read and write permission to the subdirectory used to unpack web applications, including their WEB-INF/lib jar files and JSP files. If any code is ever executed out of this temporary directory, this can lead to a local privilege escalation vulnerability.
The distcheck rule in dist-check.mk in GNU coreutils 5.2.1 through 8.1 allows local users to gain privileges via a symlink attack on a file in a directory tree under /tmp.
Mozilla Firefox 3.6a1, 3.5.3, 3.5.2, and earlier 3.5.x versions, and 3.0.14 and earlier 2.x and 3.x versions, on Linux uses a predictable /tmp pathname for files selected from the Downloads window, which allows local users to replace an arbitrary downloaded file by placing a file in a /tmp location before the download occurs, related to the Download Manager component. NOTE: some of these details are obtained from third party information.
The g_file_copy function in glib 2.0 sets the permissions of a target file to the permissions of a symbolic link (777), which allows user-assisted local users to modify files of other users, as demonstrated by using Nautilus to modify the permissions of the user home directory.
Xfig, possibly 3.2.5, allows local users to read and write arbitrary files via a symlink attack on the (1) xfig-eps[PID], (2) xfig-pic[PID].pix, (3) xfig-pic[PID].err, (4) xfig-pcx[PID].pix, (5) xfig-xfigrc[PID], (6) xfig[PID], (7) xfig-print[PID], (8) xfig-export[PID].err, (9) xfig-batch[PID], (10) xfig-exp[PID], or (11) xfig-spell.[PID] temporary files, where [PID] is a process ID.
iscsi_discovery in open-iscsi in SUSE openSUSE 10.3 through 11.1 and SUSE Linux Enterprise (SLE) 10 SP2 and 11, and other operating systems, allows local users to overwrite arbitrary files via a symlink attack on an unspecified temporary file that has a predictable name.
Untrusted search path vulnerability in GTK2 in OpenSUSE 11.0 and 11.1 allows local users to execute arbitrary code via a Trojan horse GTK module in an unspecified "relative search path."
The selinux_ip_postroute_iptables_compat function in security/selinux/hooks.c in the SELinux subsystem in the Linux kernel before 2.6.27.22, and 2.6.28.x before 2.6.28.10, when compat_net is enabled, omits calls to avc_has_perm for the (1) node and (2) port, which allows local users to bypass intended restrictions on network traffic. NOTE: this was incorrectly reported as an issue fixed in 2.6.27.21.
GRUB2 contains a race condition in grub_script_function_create() leading to a use-after-free vulnerability which can be triggered by redefining a function whilst the same function is already executing, leading to arbitrary code execution and secure boot restriction bypass. This issue affects GRUB2 version 2.04 and prior versions.
GRUB2 fails to validate kernel signature when booted directly without shim, allowing secure boot to be bypassed. This only affects systems where the kernel signing certificate has been imported directly into the secure boot database and the GRUB image is booted directly without the use of shim. This issue affects GRUB2 version 2.04 and prior versions.
Insufficient data validation in webUI in Google Chrome on ChromeOS prior to 86.0.4240.75 allowed a local attacker to bypass content security policy via a crafted HTML page.
An issue was discovered in Xen through 4.13.x, allowing Intel guest OS users to gain privileges or cause a denial of service because of non-atomic modification of a live EPT PTE. When mapping guest EPT (nested paging) tables, Xen would in some circumstances use a series of non-atomic bitfield writes. Depending on the compiler version and optimisation flags, Xen might expose a dangerous partially written PTE to the hardware, which an attacker might be able to race to exploit. A guest administrator or perhaps even an unprivileged guest user might be able to cause denial of service, data corruption, or privilege escalation. Only systems using Intel CPUs are vulnerable. Systems using AMD CPUs, and Arm systems, are not vulnerable. Only systems using nested paging (hap, aka nested paging, aka in this case Intel EPT) are vulnerable. Only HVM and PVH guests can exploit the vulnerability. The presence and scope of the vulnerability depends on the precise optimisations performed by the compiler used to build Xen. If the compiler generates (a) a single 64-bit write, or (b) a series of read-modify-write operations in the same order as the source code, the hypervisor is not vulnerable. For example, in one test build using GCC 8.3 with normal settings, the compiler generated multiple (unlocked) read-modify-write operations in source-code order, which did not constitute a vulnerability. We have not been able to survey compilers; consequently we cannot say which compiler(s) might produce vulnerable code (with which code-generation options). The source code clearly violates the C rules, and thus should be considered vulnerable.
TOCTOU Race Condition vulnerability in apport allows a local attacker to escalate privileges and execute arbitrary code. An attacker may exit the crashed process and exploit PID recycling to spawn a root process with the same PID as the crashed process, which can then be used to escalate privileges. Fixed in 2.20.1-0ubuntu2.24, 2.20.9 versions prior to 2.20.9-0ubuntu7.16 and 2.20.11 versions prior to 2.20.11-0ubuntu27.6. Was ZDI-CAN-11234.
Integer overflows were discovered in the functions grub_cmd_initrd and grub_initrd_init in the efilinux component of GRUB2, as shipped in Debian, Red Hat, and Ubuntu (the functionality is not included in GRUB2 upstream), leading to a heap-based buffer overflow. These could be triggered by an extremely large number of arguments to the initrd command on 32-bit architectures, or a crafted filesystem with very large files on any architecture. An attacker could use this to execute arbitrary code and bypass UEFI Secure Boot restrictions. This issue affects GRUB2 version 2.04 and prior versions.
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 5.2.44, prior to 6.0.24 and prior to 6.1.12. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. Note: The CVE-2020-14711 is applicable to macOS host only. CVSS 3.1 Base Score 6.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:H/I:H/A:H).
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 5.2.44, prior to 6.0.24 and prior to 6.1.12. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H).
A flaw in Linux Kernel found in nfcmrvl_nci_unregister_dev() in drivers/nfc/nfcmrvl/main.c can lead to use after free both read or write when non synchronized between cleanup routine and firmware download routine.
IBM DB2 for Linux, UNIX and Windows 9.2, 10.1, 10.5, and 11.1 (includes DB2 Connect Server) is vulnerable to a stack-based buffer overflow, caused by improper bounds checking which could allow a local attacker to execute arbitrary code. IBM X-Force ID: 125159.
VMware ESXi (7.0 before ESXi_7.0.0-1.20.16321839, 6.7 before ESXi670-202004101-SG and 6.5 before ESXi650-202005401-SG), Workstation (15.x before 15.5.5), and Fusion (11.x before 11.5.5) contain a heap-overflow vulnerability in the USB 2.0 controller (EHCI). A malicious actor with local access to a virtual machine may be able to exploit this vulnerability to execute code on the hypervisor from a virtual machine. Additional conditions beyond the attacker's control must be present for exploitation to be possible.
Race condition in the ioctl_file_dedupe_range function in fs/ioctl.c in the Linux kernel through 4.7 allows local users to cause a denial of service (heap-based buffer overflow) or possibly gain privileges by changing a certain count value, aka a "double fetch" vulnerability.
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 5.2.44, prior to 6.0.24 and prior to 6.1.12. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H).
The msm_ipc_router_bind_control_port function in net/ipc_router/ipc_router_core.c in the IPC router kernel module for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not verify that a port is a client port, which allows attackers to gain privileges or cause a denial of service (race condition and list corruption) by making many BIND_CONTROL_PORT ioctl calls.
Race condition in arch/x86/mm/tlb.c in the Linux kernel before 4.4.1 allows local users to gain privileges by triggering access to a paging structure by a different CPU.
The aufs module for the Linux kernel 3.x and 4.x does not properly restrict the mount namespace, which allows local users to gain privileges by mounting an aufs filesystem on top of a FUSE filesystem, and then executing a crafted setuid program.
A signal access-control issue was discovered in the Linux kernel before 5.6.5, aka CID-7395ea4e65c2. Because exec_id in include/linux/sched.h is only 32 bits, an integer overflow can interfere with a do_notify_parent protection mechanism. A child process can send an arbitrary signal to a parent process in a different security domain. Exploitation limitations include the amount of elapsed time before an integer overflow occurs, and the lack of scenarios where signals to a parent process present a substantial operational threat.
In grub2 versions before 2.06 the grub memory allocator doesn't check for possible arithmetic overflows on the requested allocation size. This leads the function to return invalid memory allocations which can be further used to cause possible integrity, confidentiality and availability impacts during the boot process.
An issue was discovered in drivers/net/ethernet/arc/emac_main.c in the Linux kernel before 4.5. A use-after-free is caused by a race condition between the functions arc_emac_tx and arc_emac_tx_clean.
A use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem in the Linux kernel through 5.15.11. This occurs because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object.
It was found that some PostgreSQL extensions did not use search_path safely in their installation script. An attacker with sufficient privileges could use this flaw to trick an administrator into executing a specially crafted script, during the installation or update of such extension. This affects PostgreSQL versions before 12.4, before 11.9, before 10.14, before 9.6.19, and before 9.5.23.
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 5.2.44, prior to 6.0.24 and prior to 6.1.12. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H).
Multiple race conditions in the Advanced Union Filesystem (aufs) aufs3-mmap.patch and aufs4-mmap.patch patches for the Linux kernel 3.x and 4.x allow local users to cause a denial of service (use-after-free and BUG) or possibly gain privileges via a (1) madvise or (2) msync system call, related to mm/madvise.c and mm/msync.c.
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 5.2.44, prior to 6.0.24 and prior to 6.1.12. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H).
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 5.2.44, prior to 6.0.24 and prior to 6.1.12. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H).
Linux kernel 2.6, when using vservers, allows local users to access resources of other vservers via a symlink attack in /proc.
A use-after-free vulnerability was found in usbredir in versions prior to 0.11.0 in the usbredirparser_serialize() in usbredirparser/usbredirparser.c. This issue occurs when serializing large amounts of buffered write data in the case of a slow or blocked destination.
The npm package "tar" (aka node-tar) before versions 4.4.16, 5.0.8, and 6.1.7 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with the same name as the directory, where the symlink and directory names in the archive entry used backslashes as a path separator on posix systems. The cache checking logic used both `\` and `/` characters as path separators, however `\` is a valid filename character on posix systems. By first creating a directory, and then replacing that directory with a symlink, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. Additionally, a similar confusion could arise on case-insensitive filesystems. If a tar archive contained a directory at `FOO`, followed by a symbolic link named `foo`, then on case-insensitive file systems, the creation of the symbolic link would remove the directory from the filesystem, but _not_ from the internal directory cache, as it would not be treated as a cache hit. A subsequent file entry within the `FOO` directory would then be placed in the target of the symbolic link, thinking that the directory had already been created. These issues were addressed in releases 4.4.16, 5.0.8 and 6.1.7. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-9r2w-394v-53qc.
HGFS.sys in the VMware Tools package in VMware Workstation 5.x before 5.5.6 build 80404, VMware Player before 1.0.6 build 80404, VMware ACE before 1.0.5 build 79846, VMware Server before 1.0.5 build 80187, and VMware ESX 2.5.4 through 3.0.2 does not properly validate arguments in user-mode METHOD_NEITHER IOCTLs to the \\.\hgfs device, which allows guest OS users to modify arbitrary memory locations in guest kernel memory and gain privileges.
The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with names containing unicode values that normalized to the same value. Additionally, on Windows systems, long path portions would resolve to the same file system entities as their 8.3 "short path" counterparts. A specially crafted tar archive could thus include a directory with one form of the path, followed by a symbolic link with a different string that resolves to the same file system entity, followed by a file using the first form. By first creating a directory, and then replacing that directory with a symlink that had a different apparent name that resolved to the same entry in the filesystem, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-qq89-hq3f-393p.