A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8).

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to conduct arbitrary password changes against any non-administrative user. More Information: CSCuz03345. Known Affected Releases: 2.6. Known Fixed Releases: 2.7.1.12.

Cisco Video Surveillance Manager (VSM) before 7.0.0 allows remote attackers to obtain sensitive configuration, archive, and log information via unspecified vectors, related to the Cisco_VSBWT (aka Broadware sample code) package, aka Bug ID CSCsv37288.

The web framework in Cisco Prime Central for Hosted Collaboration Solution (HCS) Assurance before 9.1.1 does not properly determine the existence of an authenticated session, which allows remote attackers to discover usernames and passwords via an HTTP request, aka Bug ID CSCud32600.

Cisco Video Surveillance Manager (VSM) before 7.0.0 does not require authentication for access to VSMC monitoring pages, which allows remote attackers to obtain sensitive configuration, archive, and log information via unspecified vectors, related to the Cisco_VSBWT (aka Broadware sample code) package, aka Bug ID CSCsv40169.

The EAP-FAST authentication module in Cisco Secure Access Control Server (ACS) 4.x before 4.2.1.15.11, when a RADIUS server configuration is enabled, does not properly parse user identities, which allows remote attackers to execute arbitrary commands via crafted EAP-FAST packets, aka Bug ID CSCui57636.

The administrative web interface in Cisco Video Surveillance Operations Manager does not properly perform authentication, which allows remote attackers to watch video feeds via a crafted URL, aka Bug ID CSCtg72262.

A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.

The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.

HTTP server for Cisco IOS 11.3 to 12.2 allows attackers to bypass authentication and execute arbitrary commands, when local authorization is being used, by specifying a high access level in the URL.

A vulnerability in 802.1x function of Cisco IOS Software on the Catalyst 6500 Series Switches could allow an unauthenticated, adjacent attacker to access the network prior to authentication. The vulnerability is due to how the 802.1x packets are handled in the process path. An attacker could exploit this vulnerability by attempting to connect to the network on an 802.1x configured port. A successful exploit could allow the attacker to intermittently obtain access to the network.

A vulnerability in the REST API of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to bypass authentication on the REST API. The vulnerability is due to improper validation of API requests. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on an affected system.

A vulnerability in the protocol detection component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper detection of the initial use of a protocol on a nonstandard port. An attacker could exploit this vulnerability by sending traffic on a nonstandard port for the protocol in use through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems that would otherwise be blocked. Once the initial protocol flow on the nonstandard port is detected, future flows on the nonstandard port will be successfully detected and handled as configured by the applied policy.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass user authentication and gain access as an administrative user. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to gain full administrative access to the affected device.

A vulnerability in the web-based management interface of Cisco UCS Director and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper authentication request handling. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow an unprivileged attacker to access and execute arbitrary actions through certain APIs.

Secure Shell (SSH) 2 in Cisco IOS 12.0 through 12.3 allows remote attackers to cause a denial of service (device reload) (1) via a username that contains a domain name when using a TACACS+ server to authenticate, (2) when a new SSH session is in the login phase and a currently logged in user issues a send command, or (3) when IOS is logging messages and an SSH session is terminated while the server is sending data.

Unknown vulnerability in Cisco Catalyst 7.5(1) allows local users to bypass authentication and gain access to the enable mode without a password.

Cisco NX-OS on the Nexus 1000V does not properly handle authentication for Virtual Ethernet Module (VEM) to Virtual Supervisor Module (VSM) communication, which allows remote attackers to obtain VEM access via (1) spoofed STUN packets or (2) a crafted VMware ESXi instance, aka Bug ID CSCud14832.

Cisco Linksys E4200 1.0.05 Build 7 devices contain a Security Bypass Vulnerability which could allow remote attackers to gain unauthorized access.

A vulnerability in the session management functionality of the web-based interface for Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. An attacker could use this impersonated session to create a new user account or otherwise control the device with the privileges of the hijacked session. The vulnerability is due to a lack of proper session management controls. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted device. A successful exploit could allow the attacker to take control of an existing user session on the device. Exploitation of the vulnerability requires that an authorized user session is active and that the attacker can craft an HTTP request to impersonate that session.

The Event Center module in Cisco WebEx Meetings Server does not perform request authentication in all intended circumstances, which allows remote attackers to discover host keys and event passwords via crafted URLs, aka Bug ID CSCue62485.

Cisco Unified Computing System (UCS) 1.x before 1.4(4) and 2.x before 2.0(2m) allows remote attackers to bypass KVM authentication via a crafted authentication request to a Cisco Integrated Management Controller (IMC), aka Bug ID CSCts53746.

The Location Bandwidth Manager (LBM) Intracluster-communication feature in Cisco Unified Communications Manager (CUCM) 9.x before 9.1(1) does not require authentication from the remote LBM Hub node, which allows remote attackers to conduct cache-poisoning attacks against transaction records, and cause a denial of service (bandwidth-pool consumption and call outage), via unspecified vectors, aka Bug ID CSCub28920.

A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to bypass authentication controls and log in to the device through the management interface This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and log in to the device as an administrator. The attacker could obtain privileges that are the same level as an administrative user but it depends on the crafted credentials. Note: This vulnerability exists because of a non-default device configuration that must be present for it to be exploitable. For details about the vulnerable configuration, see the Vulnerable Products section of this advisory.

A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.

A vulnerability in the IPSec VPN Server authentication functionality of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to bypass authentication controls and access the IPSec VPN network. This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to the VPN from an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and access the IPSec VPN network. The attacker may obtain privileges that are the same level as an administrative user, depending on the crafted credentials that are used. Cisco has not released software updates that address this vulnerability.

A vulnerability in the login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to log in without credentials and access all roles without any restrictions. This vulnerability is due to exposed sensitive Security Assertion Markup Language (SAML) metadata. An attacker could exploit this vulnerability by using the exposed SAML metadata to bypass authentication to the user portal. A successful exploit could allow the attacker to access all roles without any restrictions.

A vulnerability in the smart card login authentication of Cisco Duo for macOS could allow an unauthenticated attacker with physical access to bypass authentication. This vulnerability exists because the assigned user of a smart card is not properly matched with the authenticating user. An attacker could exploit this vulnerability by configuring a smart card login to bypass Duo authentication. A successful exploit could allow the attacker to use any personal identity verification (PIV) smart card for authentication, even if the smart card is not assigned to the authenticating user.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690.

A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

A vulnerability in the Guest Portal login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Guest Portal login page. An exploit could allow the attacker to perform brute-force password attacks on the ISE Guest Portal. Cisco Bug IDs: CSCve98518.

A vulnerability in the web functionality of the Cisco Prime LAN Management Solution could allow an authenticated, remote attacker to hijack another user's administrative session, aka a Session Fixation Vulnerability. The vulnerability is due to the reuse of a preauthentication session token as part of the postauthentication session. An attacker could exploit this vulnerability by obtaining the presession token ID. An exploit could allow an attacker to hijack an existing user's session. Known Affected Releases 4.2(5). Cisco Bug IDs: CSCvf58392.

A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751.

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

Cisco Firepower Management Center 6.0.1 has hardcoded database credentials, which allows local users to obtain sensitive information by leveraging CLI access, aka Bug ID CSCva30370.

A vulnerability in the implementation of X.509 Version 3 for SSH authentication functionality in Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to bypass authentication on an affected system. More Information: CSCuv89417. Known Affected Releases: 15.5(2.25)T. Known Fixed Releases: 15.2(4)E1 15.2(4)E2 15.2(4)E3 15.2(4)EA4 15.2(4.0r)EB 15.2(4.1.27)EB 15.2(4.4.2)EA4 15.2(4.7.1)EC 15.2(4.7.2)EC 15.2(5.1.1)E 15.2(5.5.63)E 15.2(5.5.64)E 15.4(1)IA1.80 15.5(3)M1.1 15.5(3)M2 15.5(3)S1.4 15.5(3)S2 15.6(0.22)S0.12 15.6(1)T0.1 15.6(1)T1 15.6(1.15)T 15.6(1.17)S0.7 15.6(1.17)SP 15.6(1.22.1a)T0 15.6(2)S 15.6(2)SP 16.1(1.24) 16.1.2 16.2(0.247) 16.3(0.11) 3.8(1)E Denali-16.1.2.

Media Origination System Suite Software 2.6 and earlier in Cisco Virtual Media Packager (VMP) allows remote attackers to bypass authentication and make arbitrary Platform and Applications Manager (PAM) API calls via unspecified vectors, aka Bug ID CSCuz52110.

The encryption functionality in the Virtual Supervisor Module (VSM) to Virtual Ethernet Module (VEM) communication component in Cisco NX-OS on the Nexus 1000V does not properly authenticate VSM/VEM packets, which allows remote attackers to disable packet-level encryption and integrity protection via crafted packets, aka Bug ID CSCud14710.