Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to execute arbitrary commands by leveraging knowledge of a cross-device secret and a per-device secret, and sending a request to an unspecified HTTP handler on the local network, aka Cisco-Meraki defect ID 00301991.

The Cisco Technical Support (aka com.cisco.swtg_android) application 3.7.1 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

A vulnerability in the Plug-and-Play (PnP) subsystem of the Cisco Aironet 1800, 2800, and 3800 Series Access Points running a Lightweight Access Point (AP) or Mobility Express image could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges. The vulnerability is due to insufficient validation of PnP server responses. The PnP feature is only active while the device does not contain a configuration, such as a first time boot or after a factory reset has been issued. An attacker with the ability to respond to PnP configuration requests from the affected device can exploit the vulnerability by returning malicious PnP responses. If a Cisco Application Policy Infrastructure Controller - Enterprise Module (APIC-EM) is available on the network, the attacker would need to exploit the issue in the short window before a valid PnP response was received. If successful, the attacker could gain the ability to execute arbitrary code with root privileges on the underlying operating system of the device. Cisco has confirmed that the only vulnerable software version is 8.3.102.0. Cisco Bug IDs: CSCvb42386.

A vulnerability in the Cisco Discovery Protocol (CDP) implementation for the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, adjacent attacker to inject arbitrary shell commands that are executed by the device. The vulnerability is due to insufficient input validation of received CDP packets. An attacker could exploit this vulnerability by sending crafted CDP packets to an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts on the targeted device.

Cisco IOS 12.2E, 12.2F, and 12.2S places a "no login" line into the VTY configuration when an administrator makes certain changes to a (1) VTY/AUX or (2) CONSOLE setting on a device without AAA enabled, which allows remote attackers to bypass authentication and obtain a terminal session, a different vulnerability than CVE-1999-0293 and CVE-2005-2105.

Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.

Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.

A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.

Cisco Trust Agent (CTA) before 2.1.104.0, when running on MacOS X, allows attackers with physical access to bypass authentication and modify System Preferences, including passwords, by invoking the Apple Menu when the Access Control Server (ACS) produces a user notification message after posture validation.

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

Cisco Firepower Management Center 6.0.1 has hardcoded database credentials, which allows local users to obtain sensitive information by leveraging CLI access, aka Bug ID CSCva30370.

A vulnerability in the Dialer interface feature for ISDN connections in Cisco IOS XE Software for Cisco 4000 Series Integrated Services Routers (ISRs) could allow an unauthenticated, adjacent attacker to pass IPv4 traffic through an ISDN channel prior to successful PPP authentication. The vulnerability is due to insufficient validation of the state of the PPP IP Control Protocol (IPCP). An attacker could exploit this vulnerability by making an ISDN call to an affected device and sending traffic through the ISDN channel prior to successful PPP authentication. Alternatively, an unauthenticated, remote attacker could exploit this vulnerability by sending traffic through an affected device that is configured to exit via an ISDN connection for which both the Dialer interface and the Basic Rate Interface (BRI) have been configured, but the Challenge Handshake Authentication Protocol (CHAP) password for PPP does not match the remote end. A successful exploit could allow the attacker to pass IPv4 traffic through an unauthenticated ISDN connection for a few seconds, from initial ISDN call setup until PPP authentication fails.

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

A vulnerability in the Cisco REST API virtual service container for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass authentication on the managed Cisco IOS XE device. The vulnerability is due to an improper check performed by the area of code that manages the REST API authentication service. An attacker could exploit this vulnerability by submitting malicious HTTP requests to the targeted device. A successful exploit could allow the attacker to obtain the token-id of an authenticated user. This token-id could be used to bypass authentication and execute privileged actions through the interface of the REST API virtual service container on the affected Cisco IOS XE device. The REST API interface is not enabled by default and must be installed and activated separately on IOS XE devices. See the Details section for more information.

Cisco FireSIGHT System Software 6.1.0 does not use a constant-time algorithm for verifying credentials, which makes it easier for remote attackers to enumerate valid usernames by measuring timing differences, aka Bug ID CSCuy41615.

The Active Directory (AD) integration component in Cisco Identity Service Engine (ISE) before 1.2.0.899 patch 7, when AD group-membership authorization is enabled, allows remote attackers to cause a denial of service (authentication outage) via a crafted Password Authentication Protocol (PAP) authentication request, aka Bug ID CSCun25815.

Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.

Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.1(1) through 7.1(2)82, 7.2 before 7.2(4)27, 8.0 before 8.0(4)25, and 8.1 before 8.1(2)15, when AAA override-account-disable is entered in a general-attributes field, allow remote attackers to bypass authentication and establish a VPN session to an ASA device via unspecified vectors.

Unspecified vulnerability in the Web Server in Cisco Unified MeetingPlace Web Conferencing 6.0 before 6.0(517.0) (aka 6.0 MR4) and 7.0 before 7.0(2) (aka 7.0 MR1) allows remote attackers to bypass authentication and obtain administrative access via a crafted URL.

A vulnerability in the spam quarantine feature of Cisco Secure Email and Web Manager, formerly Cisco Security Management Appliance (SMA), could allow an authenticated, remote attacker to gain unauthorized access and modify the spam quarantine settings of another user. This vulnerability exists because access to the spam quarantine feature is not properly restricted. An attacker could exploit this vulnerability by sending malicious requests to an affected system. A successful exploit could allow the attacker to modify another user's spam quarantine settings, possibly disabling security controls or viewing email messages stored on the spam quarantine interfaces.

The System Configuration Protocol (SCP) core messaging interface in Cisco Prime Network Registrar 8.2 before 8.2.3.1 and 8.3 before 8.3.2 allows remote attackers to obtain sensitive information via crafted SCP messages, aka Bug ID CSCuv35694.

A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system.

Unspecified vulnerability in Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.0 before 7.0(8)3, 7.1 before 7.1(2)78, 7.2 before 7.2(4)16, 8.0 before 8.0(4)6, and 8.1 before 8.1(1)13, when configured as a VPN using Microsoft Windows NT Domain authentication, allows remote attackers to bypass VPN authentication via unknown vectors.

SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.

The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.

The Mobile User Security (MUS) service on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) does not properly authenticate HTTP requests from a Web Security appliance (WSA), which might allow remote attackers to obtain sensitive information via a HEAD request, aka Bug ID CSCte53635.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

The SSHv2 functionality in Cisco IOS 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.6E before 3.6.3E, 3.7E before 3.7.1E, 3.10S before 3.10.6S, 3.11S before 3.11.4S, 3.12S before 3.12.3S, 3.13S before 3.13.3S, and 3.14S before 3.14.1S does not properly implement RSA authentication, which allows remote attackers to obtain login access by leveraging knowledge of a username and the associated public key, aka Bug ID CSCus73013.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco RV110W, RV130W, and RV215W devices have an incorrect RBAC configuration for the default account, which allows remote authenticated users to obtain root access via a login session with that account, aka Bug IDs CSCuv90139, CSCux58175, and CSCux73557.

Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.

The guest portal in Cisco Identity Services Engine (ISE) 3300 1.2(0.899) does not restrict access to uploaded HTML documents, which allows remote attackers to obtain sensitive information from customized documents via a direct request, aka Bug ID CSCuo78045.

Cisco EPC3928 devices with EDVA 5.5.10, 5.5.11, and 5.7.1 allow remote attackers to bypass an intended authentication requirement and execute unspecified administrative functions via a crafted HTTP request, aka Bug ID CSCux24941.

Cisco Prime Collaboration Assurance before 11.0 has a hardcoded cmuser account, which allows remote attackers to obtain access by establishing an SSH session and leveraging knowledge of this account's password, aka Bug ID CSCus62707.

The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

A vulnerability in the web functionality of the Cisco Prime LAN Management Solution could allow an authenticated, remote attacker to hijack another user's administrative session, aka a Session Fixation Vulnerability. The vulnerability is due to the reuse of a preauthentication session token as part of the postauthentication session. An attacker could exploit this vulnerability by obtaining the presession token ID. An exploit could allow an attacker to hijack an existing user's session. Known Affected Releases 4.2(5). Cisco Bug IDs: CSCvf58392.

Unknown vulnerability in Cisco Catalyst 7.5(1) allows local users to bypass authentication and gain access to the enable mode without a password.

The Authentication Proxy feature in Cisco IOS does not properly handle invalid AAA return codes from RADIUS and TACACS+ servers, which allows remote attackers to bypass authentication in opportunistic circumstances via a connection attempt that triggers an invalid code, as demonstrated by a connection attempt with a blank password, aka Bug IDs CSCuo09400 and CSCun16016.

The default configuration of Cisco Small Business IP phones SPA 300 7.5.5 and SPA 500 7.5.5 does not properly support authentication, which allows remote attackers to read audio-stream data or originate telephone calls via a crafted XML request, aka Bug ID CSCuo52482.

Duo Network Gateway 1.2.9 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) 3.0.x before 3.0.7 and 3.1.x before 3.1.0, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (management interface outage) via SSH traffic that occurs during management operations and triggers "illegal I/O operations," aka Bug ID CSCsh49563.

The Disaster Recovery (DRA) feature on the Cisco ISB8320-E High-Definition IP-Only DVR allows remote attackers to bypass authentication by establishing a TELNET session during a recovery boot, aka Bug ID CSCup85422.

The play/modules component in Cisco WebEx Meetings Server allows remote attackers to obtain administrator access via crafted API requests, aka Bug ID CSCuj40421.

The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time