A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument enable causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setAppFilterCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable results in os command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument ip results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument lang leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via a urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because HTTP_ST is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

Certain NETGEAR devices are affected by command execution. This affects M4200-10MG-POE+ 12.0.2.11 and earlier, M4300-28G 12.0.2.11 and earlier, M4300-52G 12.0.2.11 and earlier, M4300-28G-POE+ 12.0.2.11 and earlier, M4300-52G-POE+ 12.0.2.11 and earlier, M4300-8X8F 12.0.2.11 and earlier, M4300-12X12F 12.0.2.11 and earlier, M4300-24X24F 12.0.2.11 and earlier, M4300-24X 12.0.2.11 and earlier, and M4300-48X 12.0.2.11 and earlier.

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setWiFiWpsCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument wscDisabled leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used.

The web server on DBL DBLTek devices allows remote attackers to execute arbitrary OS commands by obtaining the admin password via a frame.html?content=/dev/mtdblock/5 request, and then using this password for the HTTP Basic Authentication needed for a change_password.csp request, which supports a "<%%25call system.exec:" string in the passwd parameter.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because REMOTE_PORT is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. It allows blind Command Injection. An attacker without authentication is able to execute arbitrary operating system command by injecting the vulnerable parameter in the PHP Web page /common/vam_monitor_sap.php.

In IXP EasyInstall 6.2.13723, there is Remote Code Execution via the Agent Service. An unauthenticated attacker can communicate with the Agent Service over TCP port 20051, and execute code in the NT AUTHORITY\SYSTEM context of the target system by using the Execute Command Line function.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setOpenVpnClientCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument enabled can lead to os command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function Vulnerability of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument proto leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument maxRtrAdvInterval leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

X-Plane before 11.41 has multiple improper path validations that could allow reading and writing files from/to arbitrary paths (or a leak of OS credentials to a remote system) via crafted network packets. This could be used to execute arbitrary commands on the system.

An issue was discovered in rConfig 3.9.2. An attacker can directly execute system commands by sending a GET request to ajaxServerSettingsChk.php because the rootUname parameter is passed to the exec function without filtering, which can lead to command execution.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument wifiOff results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=get-platform-depends to admin/_cmdstat.jsp via the uploadFile attribute.

emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=import-category to admin/_cmdstat.jsp via the uploadFile attribute.

emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=packet-capture to admin/_cmdstat.jsp via the mac attribute.

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Tellabs Optical Line Terminal (OLT) 1150 devices allow Remote Command Execution via the -l option to TELNET or SSH. Tellabs has addressed this issue in the SR30.1 and SR31.1 release on February 18, 2020.

emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=spectra-analysis to admin/_cmdstat.jsp via the mac attribute.

smalruby-editor v0.4.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

The UPnP endpoint URL /gena.cgi in the D-Link DIR-859 Wi-Fi router 1.05 and 1.06B01 Beta01 allows an Unauthenticated remote attacker to execute system commands as root, by sending a specially crafted HTTP SUBSCRIBE request to the UPnP service when connecting to the local network.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument HTTP leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetMasterWLanSettings with shell metacharacters to /squashfs-root/www/HNAP1/control/SetMasterWLanSettings.php.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument enable leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Yachtcontrol through 2019-10-06: It's possible to perform direct Operating System commands as an unauthenticated user via the "/pages/systemcall.php?command={COMMAND}" page and parameter, where {COMMAND} will be executed and returning the results to the client. Affects Yachtcontrol webservers disclosed via Dutch GPRS/4G mobile IP-ranges. IP addresses vary due to DHCP client leasing of telco's.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetWizardConfig with shell metacharacters to /squashfs-root/www/HNAP1/control/SetWizardConfig.php.

Barco ClickShare Button R9861500D01 devices before 1.9.0 allow OS Command Injection. The embedded 'dongle_bridge' program used to expose the functionalities of the ClickShare Button to a USB host, is vulnerable to OS command injection vulnerabilities. These vulnerabilities could lead to code execution on the ClickShare Button with the privileges of the user 'nobody'.

The processCommandUploadLog() function of libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setMiniuiHomeInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument sys_info results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

Intellian Remote Access 3.18 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the Ping Test field.

Crestron DMC-STRO 1.0 devices allow remote command execution as root via shell metacharacters to the ping function.

On D-Link DIR-859 A3-1.06 and DIR-850 A1.13 devices, /etc/services/DEVICE.TIME.php allows command injection via the $SERVER variable.

A vulnerability has been found in Totolink N300RH 6.1c.1353_B20190305. Affected is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

A shell injection vulnerability on the Sophos Cyberoam firewall appliance with CyberoamOS before 10.6.6 MR-6 allows remote attackers to execute arbitrary commands via the Web Admin and SSL VPN consoles.

Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.

The processCommandSetMac() function of libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setAdvancedInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument tty_server can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.

A command injection vulnerability has been discovered in the bootstrap stage of Bitdefender BOX 2, versions 2.1.47.42 and 2.1.53.45. The API method `/api/download_image` unsafely handles the production firmware URL supplied by remote servers, leading to arbitrary execution of system commands. In order to exploit the condition, an unauthenticated attacker should impersonate a infrastructure server to trigger this vulnerability.

An OS command injection vulnerability in the discover_and_manage CGI script in NETSAS Enigma NMS 65.0.0 and prior allows an attacker to execute arbitrary code because of improper neutralization of shell metacharacters in the ip_address variable within an snmp_browser action.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Linksys WVBR0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web management portal. The issue lies in the lack of proper validation of user data before executing a system call. An attacker could leverage this vulnerability to execute code with root privileges. Was ZDI-CAN-4892.

processCommandUpgrade() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

processCommandSetUid() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Affected by this issue is the function setDmzCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument wanIdx can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setNtpCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument tz results in os command injection. The attack can be executed remotely. The exploit is now public and may be used.