In FreeBSD 13.0-STABLE before n245765-bec0d2c9c841, 12.2-STABLE before r369859, 11.4-STABLE before r369866, 13.0-RELEASE before p1, 12.2-RELEASE before p7, and 11.4-RELEASE before p10, missing message validation in libradius(3) could allow malicious clients or servers to trigger denial of service in vulnerable servers or clients respectively.

Possible buffer overflow due to Improper validation of received CF-ACK and CF-Poll data frames in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music

Sydent is a reference Matrix identity server. Sydent does not limit the size of requests it receives from HTTP clients. A malicious user could send an HTTP request with a very large body, leading to memory exhaustion and denial of service. Sydent also does not limit response size for requests it makes to remote Matrix homeservers. A malicious homeserver could return a very large response, again leading to memory exhaustion and denial of service. This affects any server which accepts registration requests from untrusted clients. This issue has been patched by releases 89071a1, 0523511, f56eee3. As a workaround request sizes can be limited in an HTTP reverse-proxy. There are no known workarounds for the problem with overlarge responses.

Net-SNMP 5.0.x before 5.0.10.2, 5.2.x before 5.2.1.2, and 5.1.3, when net-snmp is using stream sockets such as TCP, allows remote attackers to cause a denial of service (daemon hang and CPU consumption) via a TCP packet of length 1, which triggers an infinite loop.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

An issue was discovered on FiberHome HG6245D devices through RP2613. It is possible to crash the telnet daemon by sending a certain 0a 65 6e 61 62 6c 65 0a 02 0a 1a 0a string.

Improper Input Validation vulnerability in Hitachi ABB Power Grids Relion 670 Series, Relion 670/650 Series, Relion 670/650/SAM600-IO, Relion 650, REB500, RTU500 Series, FOX615 (TEGO1), MSM, GMS600, PWC600 allows an attacker with access to the IEC 61850 network with knowledge of how to reproduce the attack, as well as the IP addresses of the different IEC 61850 access points (of IEDs/products), to force the device to reboot, which renders the device inoperable for approximately 60 seconds. This vulnerability affects only products with IEC 61850 interfaces. This issue affects: Hitachi ABB Power Grids Relion 670 Series 1.1; 1.2.3 versions prior to 1.2.3.20; 2.0 versions prior to 2.0.0.13; 2.1; 2.2.2 versions prior to 2.2.2.3; 2.2.3 versions prior to 2.2.3.2. Hitachi ABB Power Grids Relion 670/650 Series 2.2.0 versions prior to 2.2.0.13. Hitachi ABB Power Grids Relion 670/650/SAM600-IO 2.2.1 versions prior to 2.2.1.6. Hitachi ABB Power Grids Relion 650 1.1; 1.2; 1.3 versions prior to 1.3.0.7. Hitachi ABB Power Grids REB500 7.3; 7.4; 7.5; 7.6; 8.2; 8.3. Hitachi ABB Power Grids RTU500 Series 7.x version 7.x and prior versions; 8.x version 8.x and prior versions; 9.x version 9.x and prior versions; 10.x version 10.x and prior versions; 11.x version 11.x and prior versions; 12.x version 12.x and prior versions. Hitachi ABB Power Grids FOX615 (TEGO1) R1D02 version R1D02 and prior versions. Hitachi ABB Power Grids MSM 2.1.0 versions prior to 2.1.0. Hitachi ABB Power Grids GMS600 1.3.0 version 1.3.0 and prior versions. Hitachi ABB Power Grids PWC600 1.0 versions prior to 1.0.1.4; 1.1 versions prior to 1.1.0.1.

GE UR firmware versions prior to version 8.1x web server task does not properly handle receipt of unsupported HTTP verbs, resulting in the web server becoming temporarily unresponsive after receiving a series of unsupported HTTP requests. When unresponsive, the web server is inaccessible. By itself, this is not particularly significant as the relay remains effective in all other functionality and communication channels.

Oryx Embedded CycloneTCP 1.7.6 to 2.0.0, fixed in 2.0.2, is affected by incorrect input validation, which may cause a denial of service (DoS). To exploit the vulnerability, an attacker needs to have TCP connectivity to the target system. Receiving a maliciously crafted TCP packet from an unauthenticated endpoint is sufficient to trigger the bug.

The IMAP functionality in Dovecot before 2.2.2 allows remote attackers to cause a denial of service (infinite loop and CPU consumption) via invalid APPEND parameters.

Network Policy Server (NPS) in Microsoft Windows Server 2008 SP2 and R2 SP1 and Server 2012 Gold and R2 misparses username queries, which allows remote attackers to cause a denial of service (RADIUS authentication outage) via crafted requests, aka "Network Policy Server RADIUS Implementation Denial of Service Vulnerability."

Certain input passed into the If-Modified-Since or Last-Modified headers will cause an 'illegal access' exception to be raised. Instead of sending a HTTP 500 error back to the sender, hapi node module before 11.1.3 will continue to hold the socket open until timed out (default node timeout is 2 minutes).

librsvg before 2.40.12 allows context-dependent attackers to cause a denial of service (infinite loop, stack consumption, and application crash) via cyclic references in an SVG document.

Improper access control of certain port in SmartThings prior to version 1.7.63.6 allows remote temporary denial of service.

net/ipv6/addrconf.c in the IPv6 stack in the Linux kernel before 4.0 does not validate attempted changes to the MTU value, which allows context-dependent attackers to cause a denial of service (packet loss) via a value that is (1) smaller than the minimum compliant value or (2) larger than the MTU of an interface, as demonstrated by a Router Advertisement (RA) message that is not validated by a daemon, a different vulnerability than CVE-2015-0272. NOTE: the scope of CVE-2015-0272 is limited to the NetworkManager product.

An issue was discovered in Joomla! 2.5.0 through 3.9.27. Missing validation of input could lead to a broken usergroups table.

A lack of replay attack protection in Security Mode Command process prior to SMR Oct-2021 Release 1 can lead to denial of service on mobile network connection and battery depletion.

The Stars Rating WordPress plugin before 3.5.1 does not validate the submitted rating, allowing submission of long integer, causing a Denial of Service in the comments section, or pending comment dashboard depending if the user sent it as unauthenticated or authenticated.

On BIG-IP Advanced WAF and BIG-IP ASM version 16.0.x before 16.0.1.2, 15.1.x before 15.1.3.1, 14.1.x before 14.1.4.3, 13.1.x before 13.1.4.1, and all versions of 12.1.x, when a WebSocket profile is configured on a virtual server, undisclosed requests can cause bd to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A CWE-20: Improper Input Validation vulnerability exists that could cause a Denial of Service when a crafted packet is sent to the controller over network port 1105/TCP. Affected Product: Modicon M218 Logic Controller (V5.1.0.6 and prior)

A CWE-20: Improper Input Validation vulnerability exists that could cause denial of service of the device when an attacker sends a specially crafted HTTP request to the web server of the device. Affected Product: Modicon M340 CPUs: BMXP34 (Versions prior to V3.40), Modicon M340 X80 Ethernet Communication Modules: BMXNOE0100 (H), BMXNOE0110 (H), BMXNOC0401, BMXNOR0200H RTU (All Versions), Modicon Premium Processors with integrated Ethernet (Copro): TSXP574634, TSXP575634, TSXP576634 (All Versions), Modicon Quantum Processors with Integrated Ethernet (Copro): 140CPU65xxxxx (All Versions), Modicon Quantum Communication Modules: 140NOE771x1, 140NOC78x00, 140NOC77101 (All Versions), Modicon Premium Communication Modules: TSXETY4103, TSXETY5103 (All Versions)

On BIG-IP version 16.0.x before 16.0.1.2, 15.1.x before 15.1.3.1, 14.1.x before 14.1.4.3, 13.1.x before 13.1.4.1, and all versions of 12.1.x and 11.6.x, when GPRS Tunneling Protocol (GTP) iRules commands or a GTP profile is configured on a virtual server, undisclosed GTP messages can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

There is an Input verification vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may affect service availability.

An issue was discovered in Joomla! 3.2.0 through 3.9.24. Missing input validation within the template manager.

On BIG-IP versions 15.1.0.4 through 15.1.3, when the Data Plane Development Kit (DPDK)/Elastic Network Adapter (ENA) driver is used with BIG-IP on Amazon Web Services (AWS) systems, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. This is due to an incomplete fix for CVE-2020-5862. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A CWE-20: Improper Input Validation vulnerability exists in PowerLogic EGX100 (Versions 3.0.0 and newer) and PowerLogic EGX300 (All Versions) that could cause denial of service via a specially crafted HTTP packet

Improper Input Validation vulnerability in the ABB SPIET800 and PNI800 module allows an attacker to cause the denial of service or make the module unresponsive.

Improper Input Validation vulnerability in the ABB SPIET800 and PNI800 module allows an attacker to cause the denial of service or make the module unresponsive.

There is a denial of service vulnerability in Huawei products. A module cannot deal with specific messages due to validating inputs insufficiently. Attackers can exploit this vulnerability by sending specific messages to affected module. This can cause denial of service. Affected product versions include: S12700 V200R013C00SPC500, V200R019C00SPC500; S5700 V200R013C00SPC500, V200R019C00SPC500; S6700 V200R013C00SPC500, V200R019C00SPC500; S7700 V200R013C00SPC500, V200R019C00SPC500.

There is an Input Verification Vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause an infinite loop in DoS.

The mcopy function in softmagic.c in file 5.x, as used in the Fileinfo component in PHP before 5.4.40, 5.5.x before 5.5.24, and 5.6.x before 5.6.8, does not properly restrict a certain offset value, which allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted string that is mishandled by a "Python script text executable" rule.

Syncthing is a continuous file synchronization program. In Syncthing before version 1.15.0, the relay server `strelaysrv` can be caused to crash and exit by sending a relay message with a negative length field. Similarly, Syncthing itself can crash for the same reason if given a malformed message from a malicious relay server when attempting to join the relay. Relay joins are essentially random (from a subset of low latency relays) and Syncthing will by default restart when crashing, at which point it's likely to pick another non-malicious relay. This flaw is fixed in version 1.15.0.

A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.

A flaw was found in privoxy before 3.0.32. A crash can occur via a crafted CGI request if Privoxy is toggled off.

In Apache Struts 2.3.7 through 2.3.33 and 2.5 through 2.5.12, if an application allows entering a URL in a form field and built-in URLValidator is used, it is possible to prepare a special URL which will be used to overload server process when performing validation of the URL. NOTE: this vulnerability exists because of an incomplete fix for S2-047 / CVE-2017-7672.

A vulnerability in the PDF parsing module in Clam AntiVirus (ClamAV) Software versions 0.103.0 and 0.103.1 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper buffer size tracking that may result in a heap buffer over-read. An attacker could exploit this vulnerability by sending a crafted PDF file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process to crash, resulting in a denial of service condition.