An access control issue in the authentication module of Lexar_F35 v1.0.34 allows attackers to access sensitive data and cause a Denial of Service (DoS). An attacker without access to securely protected data on a secure USB flash drive can bypass user authentication without having any information related to the password of the registered user. The secure USB flash drive transmits the password entered by the user to the authentication module in the drive after the user registers a password, and then the input password is compared with the registered password stored in the authentication module. Subsequently, the module returns the comparison result for the authentication decision. Therefore, an attacker can bypass password authentication by analyzing the functions that return the password verification or comparison results and manipulate the authentication result values. Accordingly, even if attackers enter an incorrect password, they can be authenticated as a legitimate user and can therefore exploit functions of the secure USB flash drive by manipulating the authentication result values.
Debug policy with invalid signature can be loaded when the debug policy functionality is disabled by using the parallel image loading in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in MDM9206, MDM9607, MDM9650, MDM9655, MSM8996AU, QCS404, QCS605, SD 410/12, SD 636, SD 712 / SD 710 / SD 670, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SD 8CX, SDA660, SDM630, SDM660, SXR1130
A vulnerability that allows a user who has been assigned a low-privileged role within Veeam Backup & Replication to alter Multi-Factor Authentication (MFA) settings and bypass MFA.
An unprivileged write to the file handler flaw in the Linux kernel's control groups and namespaces subsystem was found in the way users have access to some less privileged process that are controlled by cgroups and have higher privileged parent process. It is actually both for cgroup2 and cgroup1 versions of control groups. A local user could use this flaw to crash the system or escalate their privileges on the system.
otris Update Manager 1.2.1.0 allows local users to achieve SYSTEM access via unauthenticated calls to exposed interfaces over a .NET named pipe. A remote attack may be possible as well, by leveraging WsHTTPBinding for HTTP traffic on TCP port 9000.
An image with a version lower than the fuse version may potentially be booted lead to improper authentication.
Improper authentication in locked memory region can lead to unprivilged access to the memory in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9206, MDM9607, MDM9650, MDM9655, QCS605, SD 210/SD 212/SD 205, SD 410/12, SD 615/16/SD 415, SD 636, SD 712 / SD 710 / SD 670, SD 835, SD 845 / SD 850, SD 8CX, SDA660, SDM630, SDM660, SXR1130
A lock handling issue was addressed with improved lock handling. This issue is fixed in macOS Mojave 10.14.4. A Mac may not lock when disconnecting from an external monitor.
A vulnerability has been identified in PowerSys (All versions < V3.11). The affected application insufficiently protects responses to authentication requests. This could allow a local attacker to bypass authentication, thereby gaining administrative privileges for the managed remote devices.
An authentication bypass vulnerability in the initial boot sequence of Juniper Networks Junos OS on vSRX Series may allow an attacker to gain full control of the system without authentication when the system is initially booted up. Affected releases are Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D30 on vSRX.
In OpenBSD 6.6, local users can use the su -L option to achieve any login class (often excluding root) because there is a logic error in the main function in su/su.c.
A vulnerability in the hxterm service of Cisco HyperFlex Software could allow an unauthenticated, local attacker to gain root access to all nodes in the cluster. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by connecting to the hxterm service as a non-privileged, local user. A successful exploit could allow the attacker to gain root access to all member nodes of the HyperFlex cluster. This vulnerability affects Cisco HyperFlex Software Releases prior to 3.5(2a).
Huawei Honor 5S smart phones with software the versions before TAG-TL00C01B173 have an authentication bypass vulnerability due to the improper design of some components. An attacker can get a user's smart phone and install malicious apps in the mobile phone, allowing the attacker to reset the password and fingerprint of the phone without authentication.
An improper authentication check in Palo Alto Networks PAN-OS may allow an authenticated low privileged non-superuser custom role user to elevate privileges and become superuser. This issue affects PAN-OS 7.1 versions prior to 7.1.25; 8.0 versions prior to 8.0.20; 8.1 versions prior to 8.1.11; 9.0 versions prior to 9.0.5. PAN-OS version 7.0 and prior EOL versions have not been evaluated for this issue.
An issue was discovered in Kaseya VSA RMM through 9.5.0.22. When using the default configuration, the LAN Cache feature creates a local account FSAdminxxxxxxxxx (e.g., FSAdmin123456789) on the server that hosts the LAN Cache and all clients that are assigned to a LAN Cache. This account is placed into the local Administrators group of all clients assigned to the LAN Cache. When the assigned client is a Domain Controller, the FSAdminxxxxxxxxx account is created as a domain account and automatically added as a member of the domain BUILTIN\Administrators group. Using the well known Pass-the-Hash techniques, an attacker can use the same FSAdminxxxxxxxxx hash from any LAN Cache client and pass this to a Domain Controller, providing administrative rights to the attacker on any Domain Controller. (Local account Pass-the-Hash mitigations do not protect domain accounts.)
Acer Care Center 4.00.30xx before 4.00.3042 contains a local privilege escalation vulnerability. The user process communicates with a service of system authority called ACCsvc through a named pipe. In this case, the Named Pipe is also given Read and Write rights to the general user. In addition, the service program does not verify the user when communicating. A thread may exist with a specific command. When the path of the program to be executed is sent, there is a local privilege escalation in which the service program executes the path with system privileges.
Improper authentication in some Intel(R) NUC Kits NUC7PJYH and NUC7CJYH Realtek* SD Card Reader Driver installation software before version 10.0.19041.29098 may allow an authenticated user to potentially enable escalation of privilege via local access.
A vulnerability classified as problematic has been found in GE Voluson S8. Affected is the file /uscgi-bin/users.cgi of the Service Browser. The manipulation leads to improper authentication and elevated access possibilities. It is possible to launch the attack on the local host.
An insufficient authentication vulnerability on platforms where Junos OS instances are run in a virtualized environment, may allow unprivileged users on the Junos OS instance to gain access to the host operating environment, and thus escalate privileges. Affected releases are Juniper Networks Junos OS 14.1X53 prior to 14.1X53-D40 on QFX5110, QFX5200, QFX10002, QFX10008, QFX10016, EX4600 and NFX250; 15.1 prior to 15.1R5 on EX4600; 15.1X49 prior to 15.1X49-D70 on vSRX, SRX1500, SRX4100, SRX4200; 16.1 prior to 16.1R2 on EX4600, ACX5000 series. This issue does not affect vMX. No other Juniper Networks products or platforms are affected by this issue.
A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges.
The Norton App Lock prior to version 1.3.0.13 can be susceptible to an authentication bypass exploit. In this type of circumstance, the exploit can allow the user to kill the app to prevent it from locking the device, thereby allowing the individual to gain device access.
NVIDIA DGX H100 BMC contains a vulnerability in the REST service where a host user may cause as improper authentication issue. A successful exploit of this vulnerability may lead to escalation of privileges, information disclosure, code execution, and denial of service.
The lockscreen on Elephone P9000 devices (running Android 6.0) allows physically proximate attackers to bypass a wrong-PIN lockout feature by pressing backspace after each PIN guess.
Authentication Bypass vulnerability in McAfee Data Loss Prevention Endpoint (DLPe) 10.0.x earlier than 10.0.510, and 11.0.x earlier than 11.0.600 allows attackers to bypass local security protection via specific conditions.
Pulse Secure Client 9.0R1 and 5.3RX before 5.3R5, when configured to authenticate VPN users during Windows Logon, can allow attackers to bypass Windows authentication and execute commands on the system with the privileges of Pulse Secure Client. The attacker must interrupt the client's network connectivity, and trigger a connection to a crafted proxy server with an invalid SSL certificate that allows certification-manager access, leading to the ability to browse local files and execute local programs.
u'Improper authentication and signature verification of debug polices in secure boot loader will allow unverified debug policies to be loaded into secure memory and leads to memory corruption' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in IPQ6018, Kamorta, MSM8998, Nicobar, QCS404, QCS605, QCS610, Rennell, SA415M, SA6155P, SC7180, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130
Improper access control vulnerability in AppLock prior to SMR May-2023 Release 1 allows local attackers without proper permission to execute a privileged operation.
WebDAV Sharing in Apple Mac OS X 10.7.x before 10.7.3 does not properly perform authentication, which allows local users to gain privileges by leveraging access to (1) the server or (2) a bound directory.
An elevation of privilege vulnerability exists when Windows improperly handles authentication requests, aka "Microsoft Windows Elevation of Privilege Vulnerability." This affects Windows 7, Windows Server 2012 R2, Windows RT 8.1, Windows Server 2008, Windows Server 2019, Windows Server 2012, Windows 8.1, Windows Server 2016, Windows Server 2008 R2, Windows 10, Windows 10 Servers.
platform_callback_stub in misc subsystem within OpenHarmony-v3.0.5 and prior versions has an authentication bypass vulnerability which allows an "SA relay attack".Local attackers can bypass authentication and attack other SAs with high privilege.
Huawei smart phones Mate 10 and Mate 10 Pro with earlier versions than 8.0.0.129(SP2C00) and earlier versions than 8.0.0.129(SP2C01) have an authentication bypass vulnerability. An attacker with high privilege obtains the smart phone and bypass the activation function by some specific operations.
The default configuration of the server console in IBM Lotus Domino does not require a password (aka Server_Console_Password), which allows physically proximate attackers to perform administrative changes or obtain sensitive information via a (1) Load, (2) Tell, or (3) Set Configuration command.
The Floureon IP Camera SP012 provides a root terminal on a UART serial interface without proper access control. This allows attackers with physical access to execute arbitrary commands with root privileges.
A locally authenticated attacker with low privileges can bypass authentication due to insecure inter-process communication.
An issue was discovered in BMC PATROL Agent through 11.3.01. It was found that the PatrolCli application can allow for lateral movement and escalation of privilege inside a Windows Active Directory environment. It was found that by default the PatrolCli / PATROL Agent application only verifies if the password provided for the given username is correct; it does not verify the permissions of the user on the network. This means if you have PATROL Agent installed on a high value target (domain controller), you can use a low privileged domain user to authenticate with PatrolCli and then connect to the domain controller and run commands as SYSTEM. This means any user on a domain can escalate to domain admin through PATROL Agent. NOTE: the vendor disputes this because they believe it is adequate to prevent this escalation by means of a custom, non-default configuration
OpenHarmony-v3.1.2 and prior versions have a Missing permission validation vulnerability in param service of startup subsystem. An malicious application installed on the device could elevate its privileges to the root user, disable security features, or cause DoS by disabling particular services.
The Nokia E75 phone with firmware before 211.12.01 allows physically proximate attackers to bypass the Device Lock code by entering an unspecified button sequence at boot time.
Omikron MultiCash Desktop 4.00.008.SP5 relies on a client-side authentication mechanism. When a user logs into the application, the validity of the password is checked locally. All communication to the database backend is made via the same technical account. Consequently, an attacker can attach a debugger to the process or create a patch that manipulates the behavior of the login function. When the function always returns the success value (corresponding to a correct password), an attacker can login with any desired account, such as the administrative account of the application.
IBM Spectrum Protect for Enterprise Resource Planning 7.1 and 8.1, if tracing is activated, the IBM Spectrum Protect node password may be displayed in plain text in the ERP trace file. IBM X-Force ID: 154280.
The Local Security Authority Subsystem Service (LSASS) in Microsoft Windows XP SP2 and SP3 and Server 2003 SP2 does not properly process authentication requests, which allows local users to gain privileges via a request with a crafted length, aka "LSASS Length Validation Vulnerability."
The local management interface in SolarWinds Serv-U FTP Server 15.1.6.25 has incorrect access controls that permit local users to bypass authentication in the application and execute code in the context of the Windows SYSTEM account, leading to privilege escalation. To exploit this vulnerability, an attacker must have local access the the host running Serv-U, and a Serv-U administrator have an active management console session.
An issue was discovered in CapMon Access Manager 5.4.1.1005. A regular user can obtain local administrator privileges if they run any whitelisted application through the Custom App Launcher.
Mist is the command-line interface for the makedeb Package Repository. Prior to version 0.9.5, a user-provided `sudo` binary via the `PATH` variable can allow a local user to run arbitrary commands on the user's system with root permissions. Versions 0.9.5 and later contain a patch. No known workarounds exist.
A vulnerability in NetBatch-Plus software allows unauthorized access to the application. HPE has provided a workaround and fix. Please refer to HPE Security Bulletin HPESBNS04388 for details.
Improper authentication in BIOS firmware[A1] for some Intel(R) NUC Kits before version RY0386 may allow an authenticated user to potentially enable escalation of privilege via local access.
A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.
* Lack of authentication in Citrix Xen Mobile through 10.8 allows low-privileged local users to execute system commands as root by making requests to private services listening on ports 8000, 30000 and 30001. NOTE: the vendor disputes that this is a vulnerability, stating it is "already mitigated by the internal firewall that limits access to configuration services to localhost.
The Debian initrd script for the cryptsetup package 2:1.7.3-2 and earlier allows physically proximate attackers to gain shell access via many log in attempts with an invalid password.
An issue was discovered in CapMon Access Manager 5.4.1.1005. The client applications of AccessManagerCoreService.exe communicate with this server through named pipes. A user can initiate communication with the server by creating a named pipe and sending commands to achieve elevated privileges.
Improper authentication in BIOS firmware for some Intel(R) NUC Boards and Intel(R) NUC Kits before version MYi30060 may allow a privileged user to potentially enable escalation of privilege via local access.