LXD before 2.0.2 does not properly set permissions when switching an unprivileged container into privileged mode, which allows local users to access arbitrary world readable paths in the container directory via unspecified vectors.

The tpm_read function in the Linux kernel 2.6 does not properly clear memory, which might allow local users to read the results of the previous TPM command.

The task_show_regs function in arch/s390/kernel/traps.c in the Linux kernel before 2.6.38-rc4-next-20110216 on the s390 platform allows local users to obtain the values of the registers of an arbitrary process by reading a status file under /proc/.

gdm3 3.14.2 and possibly later has an information leak before screen lock

A flaw named "EntryBleed" was found in the Linux Kernel Page Table Isolation (KPTI). This issue could allow a local attacker to leak KASLR base via prefetch side-channels based on TLB timing for Intel systems.

In CISOfy Lynis 2.x through 2.7.5, the license key can be obtained by looking at the process list when a data upload is being performed. This license can be used to upload data to a central Lynis server. Although no data can be extracted by knowing the license key, it may be possible to upload the data of additional scans.

pgjdbc is an open source postgresql JDBC Driver. In affected versions a prepared statement using either `PreparedStatement.setText(int, InputStream)` or `PreparedStatemet.setBytea(int, InputStream)` will create a temporary file if the InputStream is larger than 2k. This will create a temporary file which is readable by other users on Unix like systems, but not MacOS. On Unix like systems, the system's temporary directory is shared between all users on that system. Because of this, when files and directories are written into this directory they are, by default, readable by other users on that same system. This vulnerability does not allow other users to overwrite the contents of these directories or files. This is purely an information disclosure vulnerability. Because certain JDK file system APIs were only added in JDK 1.7, this this fix is dependent upon the version of the JDK you are using. Java 1.7 and higher users: this vulnerability is fixed in 4.5.0. Java 1.6 and lower users: no patch is available. If you are unable to patch, or are stuck running on Java 1.6, specifying the java.io.tmpdir system environment variable to a directory that is exclusively owned by the executing user will mitigate this vulnerability.

The pagemap_open function in fs/proc/task_mmu.c in the Linux kernel before 3.19.3, as used in Android 6.0.1 before 2016-03-01, allows local users to obtain sensitive physical-address information by reading a pagemap file, aka Android internal bug 25739721.

The sco_sock_bind function in net/bluetooth/sco.c in the Linux kernel before 4.3.4 does not verify an address length, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism via a crafted application.

The Linux kernel, as used in Ubuntu 18.04 LTS and Ubuntu 18.10, allows local users to obtain names of files in which they would not normally be able to access via an overlayfs mount inside of a user namespace.

The dgnc_mgmt_ioctl function in drivers/staging/dgnc/dgnc_mgmt.c in the Linux kernel through 4.3.3 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory via a crafted application.

net/ipv6/netfilter/ip6_tables.c in the IPv6 implementation in the Linux kernel before 2.6.39 does not place the expected '\0' character at the end of string data in the values of certain structure members, which allows local users to obtain potentially sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability to issue a crafted request, and then reading the argument to the resulting modprobe process.

The tpm_open function in drivers/char/tpm/tpm.c in the Linux kernel before 2.6.39 does not initialize a certain buffer, which allows local users to obtain potentially sensitive information from kernel memory via unspecified vectors.

The xfs_fs_geometry function in fs/xfs/xfs_fsops.c in the Linux kernel before 2.6.38-rc6-git3 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an FSGEOMETRY_V1 ioctl call.

The bcm_connect function in net/can/bcm.c (aka the Broadcast Manager) in the Controller Area Network (CAN) implementation in the Linux kernel 2.6.36 and earlier creates a publicly accessible file with a filename containing a kernel memory address, which allows local users to obtain potentially sensitive information about kernel memory use by listing this filename.

The snd_hdsp_hwdep_ioctl function in sound/pci/rme9652/hdsp.c in the Linux kernel before 2.6.36-rc6 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory via an SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctl call.

The sk_run_filter function in net/core/filter.c in the Linux kernel before 2.6.36.2 does not check whether a certain memory location has been initialized before executing a (1) BPF_S_LD_MEM or (2) BPF_S_LDX_MEM instruction, which allows local users to obtain potentially sensitive information from kernel stack memory via a crafted socket filter.

The hso_get_count function in drivers/net/usb/hso.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call.

The cxgb_extension_ioctl function in drivers/net/cxgb3/cxgb3_main.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a CHELSIO_GET_QSET_NUM ioctl call.

Libgcrypt before 1.5.4, as used in GnuPG and other products, does not properly perform ciphertext normalization and ciphertext randomization, which makes it easier for physically proximate attackers to conduct key-extraction attacks by leveraging the ability to collect voltage data from exposed metal, a different vector than CVE-2013-4576.

The swiotlb_print_info function in lib/swiotlb.c in the Linux kernel through 4.14.14 allows local users to obtain sensitive address information by reading dmesg data from a "software IO TLB" printk call.

The pcpu_embed_first_chunk function in mm/percpu.c in the Linux kernel through 4.14.14 allows local users to obtain sensitive address information by reading dmesg data from a "pages/cpu" printk call.

Lack of secure text entry mode in Browser UI in Google Chrome on Mac prior to 67.0.3396.62 allowed a local attacker to obtain potentially sensitive information from process memory via a local process.

The acpi_smbus_hc_add function in drivers/acpi/sbshc.c in the Linux kernel through 4.14.15 allows local users to obtain sensitive address information by reading dmesg data from an SBS HC printk call.

The processutils.execute function in OpenStack oslo-incubator, Cinder, Nova, and Trove before 2013.2.4 and 2014.1 before 2014.1.3 allows local users to obtain passwords from commands that cause a ProcessExecutionError by reading the log.

drivers/xen/usbback/usbback.c in linux-2.6.18-xen-3.4.0 (aka the Xen 3.4.x support patches for the Linux kernel 2.6.18), as used in the Linux kernel 2.6.x and 3.x in SUSE Linux distributions, allows guest OS users to obtain sensitive information from uninitialized locations in host OS kernel memory via unspecified vectors.

The __switch_to function in arch/x86/kernel/process_64.c in the Linux kernel through 3.18.1 does not ensure that Thread Local Storage (TLS) descriptors are loaded before proceeding with other steps, which makes it easier for local users to bypass the ASLR protection mechanism via a crafted application that reads a TLS base address.

linenoise, as used in Redis before 3.2.3, uses world-readable permissions for .rediscli_history, which allows local users to obtain sensitive information by reading the file.

A flaw was found in s390 eBPF JIT in bpf_jit_insn in arch/s390/net/bpf_jit_comp.c in the Linux kernel. In this flaw, a local attacker with special user privilege can circumvent the verifier and may lead to a confidentiality problem.

The ib_uverbs_poll_cq function in drivers/infiniband/core/uverbs_cmd.c in the Linux kernel before 2.6.37 does not initialize a certain response buffer, which allows local users to obtain potentially sensitive information from kernel memory via vectors that cause this buffer to be only partially filled, a different vulnerability than CVE-2010-4649.

glibc 2.1.9x and earlier does not properly clear the RESOLV_HOST_CONF, HOSTALIASES, or RES_OPTIONS environmental variables when executing setuid/setgid programs, which could allow local users to read arbitrary files.

An issue was discovered in the Linux kernel before 4.18.7. In create_qp_common in drivers/infiniband/hw/mlx5/qp.c, mlx5_ib_create_qp_resp was never initialized, resulting in a leak of stack memory to userspace.

Integer underflow in the irda_getsockopt function in net/irda/af_irda.c in the Linux kernel before 2.6.37 on platforms other than x86 allows local users to obtain potentially sensitive information from kernel heap memory via an IRLMP_ENUMDEVICES getsockopt call.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged regular user can cause an integer to be truncated, which may lead to denial of service or data tampering.

The function hso_get_config_data in drivers/net/usb/hso.c in the Linux kernel through 4.19.8 reads if_num from the USB device (as a u8) and uses it to index a small array, resulting in an object out-of-bounds (OOB) read that potentially allows arbitrary read in the kernel address space.

In pam/gkr-pam-module.c in GNOME Keyring before 3.27.2, the user's password is kept in a session-child process spawned from the LightDM daemon. This can expose the credential in cleartext.

The eql_g_master_cfg function in drivers/net/eql.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an EQL_GETMASTRCFG ioctl call.

Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty before version 4.1.59.Final there is a vulnerability on Unix-like systems involving an insecure temp file. When netty's multipart decoders are used local information disclosure can occur via the local system temporary directory if temporary storing uploads on the disk is enabled. On unix-like systems, the temporary directory is shared between all user. As such, writing to this directory using APIs that do not explicitly set the file/directory permissions can lead to information disclosure. Of note, this does not impact modern MacOS Operating Systems. The method "File.createTempFile" on unix-like systems creates a random file, but, by default will create this file with the permissions "-rw-r--r--". Thus, if sensitive information is written to this file, other local users can read this information. This is the case in netty's "AbstractDiskHttpData" is vulnerable. This has been fixed in version 4.1.59.Final. As a workaround, one may specify your own "java.io.tmpdir" when you start the JVM or use "DefaultHttpDataFactory.setBaseDir(...)" to set the directory to something that is only readable by the current user.

sgml-tools (aka sgmltools) before 1.0.9-15 creates temporary files with insecure permissions, which allows other users to read files that are being processed by sgml-tools.

The patch_instruction function in hw/i386/kvmvapic.c in QEMU does not initialize the imm32 variable, which allows local guest OS administrators to obtain sensitive information from host stack memory by accessing the Task Priority Register (TPR).

IBM Sterling External Authentication Server 6.1.0 and IBM Sterling Secure Proxy 6.0.3 uses weaker than expected cryptographic algorithms during installation that could allow a local attacker to decrypt sensitive information. IBM X-Force ID: 231373.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

An information disclosure vulnerability exists in the ARM SIGPAGE functionality of Linux Kernel v5.4.66 and v5.4.54. The latest version (5.11-rc4) seems to still be vulnerable. A userland application can read the contents of the sigpage, which can leak kernel memory contents. An attacker can read a process’s memory at a specific offset to trigger this vulnerability. This was fixed in kernel releases: 4.14.222 4.19.177 5.4.99 5.10.17 5.11

liboping 1.3.2 allows users reading arbitrary files upon the local system.

The get_random_int function in drivers/char/random.c in the Linux kernel before 2.6.30 produces insufficiently random numbers, which allows attackers to predict the return value, and possibly defeat protection mechanisms based on randomization, via vectors that leverage the function's tendency to "return the same value over and over again for long stretches of time."

IBM Security Guardium 11.2 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 195770.

Ansible "User" module leaks any data which is passed on as a parameter to ssh-keygen. This could lean in undesirable situations such as passphrases credentials passed as a parameter for the ssh-keygen executable. Showing those credentials in clear text form for every user which have access just to the process list.

IBM GSKit (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 139073.

nss-ldapd before 0.6.8 uses world-readable permissions for the /etc/nss-ldapd.conf file, which allows local users to obtain a cleartext password for the LDAP server by reading the bindpw field.