A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Aruba ClearPass, all versions of 6.6.x prior to 6.6.9 are affected by an authentication bypass vulnerability, an attacker can leverage this vulnerability to gain administrator privileges on the system. The vulnerability is exposed only on ClearPass web interfaces, including administrative, guest captive portal, and API. Customers who do not expose ClearPass web interfaces to untrusted users are impacted to a lesser extent.

plays_service.exe in the plays.tv service before 1.27.7.0, as distributed in AMD driver-installation packages and Gaming Evolved products, executes code at a user-defined (local or SMB) path as SYSTEM when the execute_installer parameter is used in an HTTP message. This occurs without properly authenticating the user.

index.php in FTP Admin 0.1.0 allows remote attackers to bypass authentication and obtain administrative access via a loggedin parameter with a value of true, as demonstrated by adding a user account.

An issue was discovered on Crestron HD-MD4X2-4K-E 1.0.0.2159 devices. When the administrative web interface of the HDMI switcher is accessed unauthenticated, user credentials are disclosed that are valid to authenticate to the web interface. Specifically, aj.html sends a JSON document with uname and upassword fields.

IBM FlashSystem 900 product GUI allows a specially crafted attack to bypass the authentication requirements of the system, resulting in the ability to remotely change the superuser password. This can be used by an attacker to gain administrative control or to deny service. IBM X-Force ID: 150296.

TestLink before 1.7.1 does not enforce an unspecified authorization mechanism, which has unknown impact and attack vectors.

It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie.

FURUNO FELCOM 250 and 500 devices use only client-side JavaScript in login.js for authentication.

Unspecified vulnerability in main.php of BugHotel Reservation System before 4.9.9 P3 allows remote attackers to bypass authentication and gain administrative access via unspecified vectors. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

The Quantenna WiFi Controller on Telus Actiontec WEB6000Q v1.1.02.22 allows login with root level access with the user "root" and an empty password by using the enabled onboard UART headers.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization and authentication checks on multiple API routes. An attacker may gain access to these API routes and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.

In Drobo 5N2 4.0.5, all optional applications lack any form of authentication/authorization validation. As a result, any user capable of accessing the device over the network may interact with and control these applications. This not only poses a severe risk to the availability of these applications, but also poses severe risks to the confidentiality and integrity of data stored within the applications and the device itself.

An authentication bypass flaw was found in the smart_proxy_dynflow component used by Foreman. A malicious attacker can use this flaw to remotely execute arbitrary commands on machines managed by vulnerable Foreman instances, in a highly privileged context.

Wi2be SMART HP WMT R1.2.20_201400922 allows unauthorized remote attackers to reset the admin password via the /ConfigWizard/ChangePwd.esp?2admin URL (Attackers can login using the "admin" username with password "admin" after a successful attack).

A remote attacker can bypass the Management Mode on the Canon LBP7110Cw web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

This vulnerability allows remote attackers to bypass authentication on vulnerable installations of Quest NetVault Backup 11.2.0.13. The specific flaw exists within JSON RPC Request handling. By setting the checksession parameter to a specific value, it is possible to bypass authentication to critical functions. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-4752.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

openshift-ansible before versions 3.9.23, 3.7.46 deploys a misconfigured etcd file that causes the SSL client certificate authentication to be disabled. Quotations around the values of ETCD_CLIENT_CERT_AUTH and ETCD_PEER_CLIENT_CERT_AUTH in etcd.conf result in etcd being configured to allow remote users to connect without any authentication if they can access the etcd server bound to the network on the master nodes. An attacker could use this flaw to read and modify all the data about the Openshift cluster in the etcd datastore, potentially adding another compute node, or bringing down the entire cluster.

For Crestron TSW-X60 version prior to 2.001.0037.001 and MC3 version prior to 1.502.0047.001, The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.

ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.

An improper authentication vulnerability has been reported to affect QNAP device running Photo Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Photo Station: Photo Station 6.0.20 ( 2022/02/15 ) and later Photo Station 5.7.16 ( 2022/02/11 ) and later Photo Station 5.4.13 ( 2022/02/11 ) and later

An improper authentication vulnerability has been reported to affect QNAP device running Video Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Video Station: Video Station 5.5.9 and later Video Station 5.3.13 and later Video Station 5.1.8 and later

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

A vulnerability was discovered in Siemens ViewPort for Web Office Portal before revision number 1453 that could allow an unauthenticated remote user to upload arbitrary code and execute it with the permissions of the operating-system user running the web server by sending specially crafted network packets to port 443/TCP or port 80/TCP.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

In OpenBMC 2.9, crafted IPMI messages allow an attacker to bypass authentication and gain full control of the system.

The doFilter method in UrlAccessController in HPE Intelligent Management Center (iMC) PLAT 7.2 E0403P06 allows remote bypass of authentication via unspecified strings in a URI.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains a Java RMI Remote Code Execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

On Jooan IP Camera A5 2.3.36 devices, an insecure FTP server does not require authentication, which allows remote attackers to read or replace core system files including those used for authentication (such as passwd and shadow). This can be abused to take full root level control of the device.

An issue was discovered in EMC Avamar Server 7.1.x, 7.2.x, 7.3.x, 7.4.x, 7.5.0; EMC NetWorker Virtual Edition (NVE) 9.0.x, 9.1.x, 9.2.x; and EMC Integrated Data Protection Appliance 2.0. A remote unauthenticated malicious user can potentially bypass application authentication and gain unauthorized root access to the affected systems.

Xpress Server in SAP POS does not require authentication for file read and erase operations, daemon shutdown, terminal read operations, or certain attacks on credentials. This is SAP Security Note 2520064.

Xpress Server in SAP POS does not require authentication for read/write/delete file access. This is SAP Security Note 2520064.

TCPUploadServer.exe in Progea Movicon 11.2 before Build 1084 does not require authentication for critical functions, which allows remote attackers to obtain sensitive information, delete files, execute arbitrary programs, or cause a denial of service (crash) via a crafted packet to TCP port 10651.

acFTP 1.4 does not properly handle when an invalid password is provided by the user during authentication, which allows remote attackers to hide or misrepresent certain activity from log files and possibly gain privileges.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".

The User Registration & User Profile – Profile Builder WordPress plugin before 3.4.9 has a bug allowing any user to reset the password of the admin of the blog, and gain unauthorised access, due to a bypass in the way the reset key is checked. Furthermore, the admin will not be notified of such change by email for example.

An issue was discovered on Western Digital MyCloud PR4100 2.30.172 devices. The web administration component, /web/jquery/uploader/multi_uploadify.php, provides multipart upload functionality that is accessible without authentication and can be used to place a file anywhere on the device's file system. This allows an attacker the ability to upload a PHP shell onto the device and obtain arbitrary code execution as root.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET, contain misconfigured authentication mechanism. Attackers can crack the default password and gain access to the system.

A remote attacker can bypass the System Manager Mode on the Canon MF210 and MF220 web interface without knowing the PIN for /login.html via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

An issue was discovered on Canon LBP6650, LBP3370, LBP3460, and LBP7750C devices. It is possible to bypass the Administrator Mode authentication for /tlogin.cgi via vectors involving frame.cgi?page=DevStatus. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation