A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446.

A vulnerability in the reassembly logic for fragmented IPv4 packets of Cisco StarOS running on virtual platforms could allow an unauthenticated, remote attacker to trigger a reload of the npusim process, resulting in a denial of service (DoS) condition. There are four instances of the npusim process running per Service Function (SF) instance, each handling a subset of all traffic flowing across the device. It is possible to trigger a reload of all four instances of the npusim process around the same time. The vulnerability is due to improper handling of fragmented IPv4 packets containing options. An attacker could exploit this vulnerability by sending a malicious IPv4 packet across an affected device. An exploit could allow the attacker to trigger a restart of the npusim process, which will result in all traffic queued toward this instance of the npusim process to be dropped while the process is restarting. The npusim process typically restarts within less than a second. This vulnerability affects: Cisco Virtualized Packet Core-Single Instance (VPC-SI), Cisco Virtualized Packet Core-Distributed Instance (VPC-DI), Cisco Ultra Packet Core (UPC). Cisco Bug IDs: CSCvh29613.

A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029.

A vulnerability in the Real-Time Transport Protocol (RTP) bitstream processing of the Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of incoming RTP bitstreams. An attacker could exploit this vulnerability by sending a crafted RTP bitstream to an affected Cisco Meeting Server. A successful exploit could allow the attacker to deny audio and video services by causing media process crashes resulting in a DoS condition on the affected product. This vulnerability affects Cisco Meeting Server deployments that are running Cisco Meeting Server Software Releases 2.0, 2.1, 2.2, and 2.3. Cisco Bug IDs: CSCve79693, CSCvf91393, CSCvg64656, CSCvh30725, CSCvi86363.

Cisco Wireless LAN Controller (WLC) Software 7.4 before 7.4.130.0(MD) and 7.5, 7.6, and 8.0 before 8.0.110.0(ED) allows remote attackers to cause a denial of service (device reload) via crafted Bonjour traffic, aka Bug ID CSCur66908.

A vulnerability in the IPv6 subsystem of Cisco IOS XR Software Release 5.3.4 for the Cisco Aggregation Services Router (ASR) 9000 Series could allow an unauthenticated, remote attacker to trigger a reload of one or more Trident-based line cards, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect handling of IPv6 packets with a fragment header extension. An attacker could exploit this vulnerability by sending IPv6 packets designed to trigger the issue either to or through the Trident-based line card. A successful exploit could allow the attacker to trigger a reload of Trident-based line cards, resulting in a DoS during the period of time the line card takes to restart. This vulnerability affects Cisco Aggregation Services Router (ASR) 9000 Series when the following conditions are met: The router is running Cisco IOS XR Software Release 5.3.4, and the router has installed Trident-based line cards that have IPv6 configured. A software maintenance upgrade (SMU) has been made available that addresses this vulnerability. The fix has also been incorporated into service pack 7 for Cisco IOS XR Software Release 5.3.4. Cisco Bug IDs: CSCvg46800.

The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS XE 2.1 through 3.17S, IOS XR 2.0.0 through 5.3.2, and NX-OS allows remote attackers to cause a denial of service (packet-processing outage) via crafted ND messages, aka Bug ID CSCuz66542, as exploited in the wild in May 2016.

The Grapevine update process in Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) 1.0 allows remote authenticated users to execute arbitrary commands as root via a crafted upgrade parameter, aka Bug ID CSCux15507.

A vulnerability in Java deserialization used by Cisco Secure Access Control System (ACS) prior to release 5.8 patch 9 could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object. An exploit could allow the attacker to execute arbitrary commands on the device with root privileges. Cisco Bug IDs: CSCvh25988.

A vulnerability in the peer-to-peer message processing functionality of Cisco Packet Data Network Gateway could allow an unauthenticated, remote attacker to cause the Session Manager (SESSMGR) process on an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect validation of peer-to-peer packet headers. An attacker could exploit this vulnerability by sending a crafted peer-to-peer packet through an affected device. A successful exploit could allow the attacker to cause the SESSMGR process on the affected device to restart unexpectedly, which could briefly impact traffic while the SESSMGR process restarts and result in a DoS condition. Cisco Bug IDs: CSCvg88786.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.

A vulnerability when handling incoming 802.11 Association Requests for Cisco Aironet 1800 Series Access Point (APs) on Qualcomm Atheros (QCA) based hardware platforms could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. A successful exploit could prevent new clients from joining the AP. The vulnerability is due to incorrect handling of malformed or invalid 802.11 Association Requests. An attacker could exploit this vulnerability by sending a malformed stream of 802.11 Association Requests to the local interface of the targeted device. A successful exploit could allow the attacker to cause a DoS situation on an affected system, causing new client 802.11 Association Requests to fail. This vulnerability affects the following Cisco products: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Cisco Bug IDs: CSCvg02116.

Cisco Access Point devices with software 8.2(102.43) allow remote attackers to cause a denial of service (device reload) via crafted ARP packets, aka Bug ID CSCuy55803.

Cisco FireSIGHT System Software 5.3.0, 5.3.1, 5.4.0, 6.0, and 6.0.1 allows remote attackers to bypass Snort rules via crafted parameters in the header of an HTTP packet, aka Bug ID CSCuz20737.

STCAPP (aka the SCCP telephony control application) on Cisco IOS before 15.0(1)XA1 does not properly handle multiple calls to a shared line, which allows remote attackers to cause a denial of service (port hang) by simultaneously ending two calls that were controlled by CallManager Express (CME), aka Bug ID CSCtd42552.

Cisco IP Phone 8800 devices with software 11.0(1) allow remote attackers to cause a denial of service (memory corruption) via a crafted HTTP request, aka Bug ID CSCuz03038.

goform/Docsis_system on Cisco EPC3928 devices allows remote attackers to cause a denial of service (device crash) via a long LanguageSelect parameter, related to a "Gateway HTTP Corruption Denial of Service" issue, aka Bug ID CSCuy28100.

Cisco WebEx Meetings Player T29.10, when WRF file support is enabled, allows remote attackers to execute arbitrary code via a crafted file, aka Bug ID CSCva09375.

The administrative web interface in Cisco Prime Infrastructure (PI) before 3.1.1 allows remote authenticated users to execute arbitrary commands via crafted field values, aka Bug ID CSCuy96280.

Cisco Prime Network Services Controller 3.0 allows local users to bypass intended access restrictions and execute arbitrary commands via additional parameters to an unspecified command, aka Bug ID CSCus99427.

Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645.

A "Cisco WebEx Network Recording Player Denial of Service Vulnerability" exists in Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) and WebEx Recording Format (WRF) files. A remote attacker could exploit this by providing a user with a malicious ARF or WRF file via email or URL and convincing the user to launch the file. Exploitation of this could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. Cisco Bug IDs: CSCve11545, CSCve02843, CSCve11548.

A vulnerability in the web framework code for the SQL database interface of the Cisco Prime Collaboration Provisioning application could allow an authenticated, remote attacker to impact the confidentiality and integrity of the application by executing arbitrary SQL queries, aka SQL Injection. The attacker could read or write information from the SQL database. The vulnerability is due to a lack of proper validation on user-supplied input within SQL queries. An attacker could exploit this vulnerability by sending crafted URLs that contain malicious SQL statements to the affected application. An exploit could allow the attacker to determine the presence of certain values and write malicious input in the SQL database. The attacker would need to have valid user credentials. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.3. Cisco Bug IDs: CSCvf47935.

A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746.

Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot).

An untrusted search path (aka DLL Preloading) vulnerability in the Cisco Immunet antimalware installer could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability. Cisco Bug IDs: CSCvf23928.

A vulnerability in Session Initiation Protocol (SIP) call handling in Cisco IP Phone 8800 Series devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the SIP process unexpectedly restarts. All active phone calls are dropped as the SIP process restarts. The vulnerability is due to incomplete input validation of the SIP packet header. An attacker could exploit this vulnerability by sending a malformed SIP packet to a targeted phone. An exploit could allow the attacker to cause a DoS condition because all phone calls are dropped when the SIP process unexpectedly restarts. Cisco Bug IDs: CSCvc62590.

A vulnerability exists in the process of creating default IP blocks during device initialization for Cisco ASA Next-Generation Firewall Services that could allow an unauthenticated, remote attacker to send traffic to the local IP address of the device, bypassing any filters that are configured to deny local IP management traffic. The vulnerability is due to an implementation error that exists in the process of creating default IP blocks when the device is initialized, and the way in which those IP blocks interact with user-configured filters for local IP management traffic (for example, SSH to the device). An attacker could exploit this vulnerability by sending traffic to the local IP address of the targeted device. A successful exploit could allow the attacker to connect to the local IP address of the device even when there are filters configured to deny the traffic. Cisco Bug IDs: CSCvd97962.

A vulnerability in the web interface of Cisco Network Analysis Module Software could allow an unauthenticated, remote attacker to delete arbitrary files from an affected system, aka Directory Traversal. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests that it receives and the software does not apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to delete arbitrary files from the affected system. Cisco Bug IDs: CSCvf41365.

A vulnerability in Extensible Authentication Protocol (EAP) ingress frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of the EAP frame. An attacker could exploit this vulnerability by sending a malformed EAP frame to the targeted device. A successful exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. It may be necessary to manually power cycle the device in order for it to recover. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve18935.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed Contact header, aka Bug ID CSCsj98521.

Cisco IOS before 15.0(1)XA does not properly handle IRC traffic during a specific time period after an initial reload, which allows remote attackers to cause a denial of service (device reload) via an attempted connection to a certain IRC server, related to a "corrupted magic value," aka Bug ID CSCso05336.

The DHCP implementation in the PowerOn Auto Provisioning (POAP) feature in Cisco NX-OS does not properly restrict the initialization process, which allows remote attackers to execute arbitrary commands as root by sending crafted response packets on the local network, aka Bug ID CSCur14589.

Cisco Finesse 10.5(1) allows remote authenticated users to obtain sensitive information or cause a denial of service (CPU and memory consumption) via a crafted XML document, aka Bug ID CSCut95810.

The SNMPv2 implementation in Cisco IOS XR allows remote authenticated users to cause a denial of service (snmpd daemon reload) via a malformed SNMP packet, aka Bug ID CSCur25858.

SQL injection vulnerability in Cisco Unified Email Interaction Manager (EIM) and Unified Web Interaction Manager (WIM) 9.0(2) allows remote attackers to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCuu30028.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop scanning and forwarding email messages due to a denial of service (DoS) condition. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. More Information: CSCuz63143. Known Affected Releases: 8.5.7-042 9.7.0-125. Known Fixed Releases: 10.0.0-125 9.1.1-038 9.7.2-047.

The XML parser in Cisco TelePresence Management Suite (TMS) 14.3(.2) and earlier does not properly handle external entities, which allows remote authenticated users to cause a denial of service via POST requests, aka Bug ID CSCus51494.

The IOS Shell in Cisco IOS allows local users to cause a denial of service (device crash) via unspecified commands, aka Bug ID CSCur59696.

The Layer 4 Redirect (L4R) feature in Cisco IOS XE 2.x and 3.x before 3.10.4S, 3.11 before 3.11.3S, 3.12 before 3.12.2S, 3.13 before 3.13.1S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to cause a denial of service (device reload) via malformed (1) IPv4 or (2) IPv6 packets, aka Bug ID CSCuq59131.

Cisco IOS XR allows remote attackers to cause a denial of service (RSVP process reload) via a malformed RSVP packet, aka Bug ID CSCur69192.

The DNS implementation in Cisco Adaptive Security Appliance (ASA) Software 7.2 before 7.2(5.16), 8.2 before 8.2(5.57), 8.3 before 8.3(2.44), 8.4 before 8.4(7.28), 8.5 before 8.5(1.24), 8.6 before 8.6(1.17), 8.7 before 8.7(1.16), 9.0 before 9.0(4.33), 9.1 before 9.1(6.1), 9.2 before 9.2(3.4), and 9.3 before 9.3(3) allows man-in-the-middle attackers to cause a denial of service (memory consumption or device outage) by triggering outbound DNS queries and then sending crafted responses to these queries, aka Bug ID CSCuq77655.

Cisco Unified IP 9900 phones with firmware 9.4(.1) and earlier allow local users to cause a denial of service (device reload) via crafted commands, aka Bug ID CSCup92790.

The high-speed logging (HSL) feature in Cisco IOS XE 2.x and 3.x before 3.10.4S, 3.11 before 3.11.3S, 3.12 before 3.12.1S, 3.13 before 3.13.0S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to cause a denial of service (device reload) via large IP packets that require NAT and HSL processing after fragmentation, aka Bug ID CSCuo25741.

The Document Management component in Cisco Unified Contact Center Express does not properly validate a parameter, which allows remote authenticated users to upload files to arbitrary pathnames via a crafted HTTP request, aka Bug ID CSCun74133.

Cisco Web Security Appliance (WSA) devices with software 8.5.0-ise-147 do not properly restrict use of the pickle Python module during certain tunnel-status checks, which allows local users to execute arbitrary Python code and gain privileges via a crafted pickle file, aka Bug ID CSCut39259.

Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote attackers to execute arbitrary code via a crafted dnslookup command in an HTTP request, aka Bug ID CSCuz89093.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition.

Unspecified vulnerability in the Wireless LAN Controller (WLC) TSEC driver in the Cisco 4400 WLC, Cisco Catalyst 6500 and 7600 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.x before 5.1 allows remote attackers to cause a denial of service (device crash or hang) via unknown IP packets.

A vulnerability in the content filtering functionality of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to bypass content filters configured on an affected device. Email that should have been filtered could instead be forwarded by the device. This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to use a content filter for email attachments that are protected or encrypted. More Information: CSCva52546. Known Affected Releases: 10.0.0-125 9.7.1-066.