The FTP server on the Linksys WRT54G 7 router with 7.00.1 firmware does not verify authentication credentials, which allows remote attackers to establish an FTP session by sending an arbitrary username and password.

TIBCO Enterprise Administrator 1.0.0 and Enterprise Administrator SDK 1.0.0 do not properly enforce administrative authentication requirements, which allows remote attackers to execute arbitrary commands via unspecified vectors.

A vulnerability was discovered in Siemens ViewPort for Web Office Portal before revision number 1453 that could allow an unauthenticated remote user to upload arbitrary code and execute it with the permissions of the operating-system user running the web server by sending specially crafted network packets to port 443/TCP or port 80/TCP.

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

In PrestaShop from version 1.5.0.0 and before version 1.7.6.6, the authentication system is malformed and an attacker is able to forge requests and execute admin commands. The problem is fixed in 1.7.6.6.

Siemens SINAMICS S/G controllers with firmware before 4.6.11 do not require authentication for FTP and TELNET sessions, which allows remote attackers to bypass intended access restrictions via TCP traffic to port (1) 21 or (2) 23.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET, contain misconfigured authentication mechanism. Attackers can crack the default password and gain access to the system.

index.php in FTP Admin 0.1.0 allows remote attackers to bypass authentication and obtain administrative access via a loggedin parameter with a value of true, as demonstrated by adding a user account.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

The integrated web server on Siemens SCALANCE X-200 switches with firmware before 4.5.0 and X-200IRT switches with firmware before 5.1.0 does not properly enforce authentication requirements, which allows remote attackers to perform administrative actions via requests to the management interface.

NetSupport Manager Client before 10.20.0004 allows remote attackers to bypass the (1) basic and (2) authentication schemes by spoofing the NetSupport Manager.

The login method in LoginModule implementations in Apache Geronimo 2.0 does not throw FailedLoginException for failed logins, which allows remote attackers to bypass authentication requirements, deploy arbitrary modules, and gain administrative access by sending a blank username and password with the command line deployer in the deployment module.

The Supermicro BMC implementation allows remote attackers to bypass authentication and execute arbitrary IPMI commands by using cipher suite 0 (aka cipher zero) and an arbitrary password.

Schrack Technik microControl with firmware before 1.7.0 (937) stores sensitive information under the web root with insufficient access control, which allows remote attackers to obtain access data for the ftp and telnet services via a direct request for ZTPUsrDtls.txt.

The HP Integrated Lights-Out (iLO) BMC implementation allows remote attackers to bypass authentication and execute arbitrary IPMI commands by using cipher suite 0 (aka cipher zero) and an arbitrary password.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

Session fixation vulnerability in HP Systems Insight Manager (SIM) 4.2 and 5.0 SP4 and SP5 allows remote attackers to hijack web sessions by setting the JSESSIONID cookie.

An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser.

The Dell iDRAC6 with firmware 1.x before 1.92 and 2.x and 3.x before 3.42, and iDRAC7 with firmware before 1.23.23, allows remote attackers to bypass authentication and execute arbitrary IPMI commands by using cipher suite 0 (aka cipher zero) and an arbitrary password. NOTE: the vendor disputes the significance of this issue, stating "DRAC's are intended to be on a separate management network; they are not designed nor intended to be placed on or connected to the Internet."

The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time

webSPELL 4.0, and possibly later versions, allows remote attackers to bypass authentication via a ws_auth cookie, a different vulnerability than CVE-2006-4782.

The firmware on GateHouse; Harris BGAN RF-7800B-VU204 and BGAN RF-7800B-DU204; Hughes Network Systems 9201, 9450, and 9502; Inmarsat; Japan Radio JUE-250 and JUE-500; and Thuraya IP satellite terminals does not require authentication for sessions on TCP port 1827, which allows remote attackers to execute arbitrary code via unspecified protocol operations.

HGiga MailSherlock contains weak authentication flaw that attackers grant privilege remotely with default password generation mechanism.

A vulnerability was identified in Tenda AC8 16.03.50.11. Affected by this issue is the function check_is_ipv6 of the component IPv6 Handler. The manipulation leads to reliance on ip address for authentication. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

IBM General Parallel File System (GPFS) 3.4 before 3.4.0.32, 3.5 before 3.5.0.24, and 4.1 before 4.1.0.7 in certain cipherList configurations allows remote attackers to bypass authentication and execute arbitrary programs as root via unspecified vectors.

The web application portal of the Cobham EXPLORER 710, firmware version 1.07, allows unauthenticated access to port 5454. This could allow an unauthenticated, remote attacker to connect to this port via Telnet and execute 86 Attention (AT) commands, including some that provide unauthenticated, shell-like access to the device.

The ASUS DSL-N17U modem with firmware 1.1.0.2 allows attackers to access the admin interface by changing the admin password without authentication via a POST request to Advanced_System_Content.asp with the uiViewTools_username=admin&uiViewTools_Password= and uiViewTools_PasswordConfirm= substrings.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The authentication function contains undocumented code that provides the ability to authenticate as root without knowing the actual root password. An adversary with the private key can remotely authenticate to the management interface as root.

An issue was discovered in MK-AUTH 19.01. There is authentication bypass in the web login functionality because guessable credentials to admin/executar_login.php result in admin access.

An issue was discovered on Shenzhen Coship RT3050 4.0.0.40, RT3052 4.0.0.48, RT7620 10.0.0.49, WM3300 5.0.0.54, and WM3300 5.0.0.55 devices. The password reset functionality of the router doesn't have backend validation for the current password and doesn't require any type of authentication. By making a POST request to the apply.cgi file of the router, the attacker can change the admin username and password of the router.

An authentication vulnerability in HPE BSM Platform Application Performance Management System Health product versions 9.26, 9.30 and 9.40, allows remote users to bypass authentication.

Undocumented TELNET service in TRENDnet TEW-691GR and TEW-692GR when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.

Improper authentication of Non-EAPOL/WAPI plaintext frames during four-way handshake can lead to arbitrary network packet injection in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music

A flaw was found in Linux-Pam in versions prior to 1.5.1 in the way it handle empty passwords for non-existing users. When the user doesn't exist PAM try to authenticate with root and in the case of an empty password it successfully authenticate.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".

The Sierra Wireless AirLink Raven X EV-DO gateway 4221_4.0.11.003 and 4228_4.0.11.003 allows remote attackers to reprogram the firmware via a replay attack using UDP ports 17336 and 17388.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass user authentication and gain access as an administrative user. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to gain full administrative access to the affected device.

A vulnerability in the REST API interface of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to bypass authentication on an affected system. The vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on the affected system. The REST API is enabled by default and cannot be disabled.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to acquire a valid session token with administrator privileges, bypassing user authentication. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to use the acquired session token to gain full administrator access to the affected device.

An issue was discovered in Zoho ManageEngine Exchange Reporter Plus before build number 5510, AD360 before build number 4228, ADSelfService Plus before build number 5817, DataSecurity Plus before build number 6033, RecoverManager Plus before build number 6017, EventLog Analyzer before build number 12136, ADAudit Plus before build number 6052, O365 Manager Plus before build number 4334, Cloud Security Plus before build number 4110, ADManager Plus before build number 7055, and Log360 before build number 5166. The remotely accessible Java servlet com.manageengine.ads.fw.servlet.UpdateProductDetails is prone to an authentication bypass. System integration properties can be modified and lead to full ManageEngine suite compromise.

A vulnerability in the web-based management interface of Cisco UCS Director and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper authentication request handling. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow an unprivileged attacker to access and execute arbitrary actions through certain APIs.

A vulnerability in the REST API of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to bypass authentication on the REST API. The vulnerability is due to improper validation of API requests. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on an affected system.

A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2.