A flaw was found in the way pacemaker's client-server authentication was implemented in versions up to and including 2.0.0. A local attacker could use this flaw, and combine it with other IPC weaknesses, to achieve local privilege escalation.

An authentication bypass vulnerability exists in libcurl prior to v8.0.0 where it reuses a previously established SSH connection despite the fact that an SSH option was modified, which should have prevented reuse. libcurl maintains a pool of previously used connections to reuse them for subsequent transfers if the configurations match. However, two SSH settings were omitted from the configuration check, allowing them to match easily, potentially leading to the reuse of an inappropriate connection.

Sympa before 6.2.59b.2 allows remote attackers to obtain full SOAP API access by sending any arbitrary string (except one from an expired cookie) as the cookie value to authenticateAndRun.

nheko is a desktop client for the Matrix communication application. All versions below 0.10.2 are vulnerable homeservers inserting malicious secrets, which could lead to man-in-the-middle attacks. Users can upgrade to version 0.10.2 to protect against this issue. As a workaround, one may apply the patch manually, avoid doing verifications of one's own devices, and/or avoid pressing the request button in the settings menu.

A flaw was found in the way samba implemented SMB1 authentication. An attacker could use this flaw to retrieve the plaintext password sent over the wire even if Kerberos authentication was required.

FreeRADIUS before 3.0.19 does not prevent use of reflection for authentication spoofing, aka a "Dragonblood" issue, a similar issue to CVE-2019-9497.

ganglia-web before 3.7.1 allows remote attackers to bypass authentication.

Bluetooth LE and BR/EDR secure pairing in Bluetooth Core Specification 2.1 through 5.2 may permit a nearby man-in-the-middle attacker to identify the Passkey used during pairing (in the Passkey authentication procedure) by reflection of the public key and the authentication evidence of the initiating device, potentially permitting this attacker to complete authenticated pairing with the responding device using the correct Passkey for the pairing session. The attack methodology determines the Passkey value one bit at a time.

The authfile directive in the booth config file is ignored, preventing use of authentication in communications from node to node. As a result, nodes that do not have the correct authentication key are not prevented from communicating with other nodes in the cluster.

The login form in Bugzilla 2.x, 3.x, 4.x before 4.4.3, and 4.5.x before 4.5.3 does not properly handle a correctly authenticated but unintended login attempt, which makes it easier for remote authenticated users to obtain sensitive information by arranging for a victim to login to the attacker's account and then submit a vulnerability report, related to a "login CSRF" issue.

The SASL authentication functionality in 389 Directory Server before 1.2.11.26 allows remote authenticated users to connect as an arbitrary user and gain privileges via the authzid parameter in a SASL/GSSAPI bind.

denyhosts 2.6 uses an incorrect regular expression when analyzing authentication logs, which allows remote attackers to cause a denial of service (incorrect block of IP addresses) via crafted login names.

The user.login function in Zabbix before 1.8.16 and 2.x before 2.0.5rc1 allows remote attackers to override LDAP configuration via the cnf parameter.

Under certain ldap conditions, Cacti authentication can be bypassed with certain credential types.

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). Prior to version 2.7.0, server side authentication against a `SAM` file might be successful for invalid credentials if the server has configured an invalid `SAM` file path. FreeRDP based clients are not affected. RDP server implementations using FreeRDP to authenticate against a `SAM` file are affected. Version 2.7.0 contains a fix for this issue. As a workaround, use custom authentication via `HashCallback` and/or ensure the `SAM` database path configured is valid and the application has file handles left.

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). In versions prior to 2.7.0, NT LAN Manager (NTLM) authentication does not properly abort when someone provides and empty password value. This issue affects FreeRDP based RDP Server implementations. RDP clients are not affected. The vulnerability is patched in FreeRDP 2.7.0. There are currently no known workarounds.

After the initial setup process, some steps of setup.php file are reachable not only by super-administrators, but by unauthenticated users as well. Malicious actor can pass step checks and potentially change the configuration of Zabbix Frontend.

An issue was discovered in the selinux-policy (aka Reference Policy) package 3.14 through 2020-08-24 because the .config/Yubico directory is mishandled. Consequently, when SELinux is in enforced mode, pam-u2f is not allowed to read the user's U2F configuration file. If configured with the nouserok option (the default when configured by the authselect tool), and that file cannot be read, the second factor is disabled. An attacker with only the knowledge of the password can then log in, bypassing 2FA.

A flaw was found in the way Samba, as an Active Directory Domain Controller, implemented Kerberos name-based authentication. The Samba AD DC, could become confused about the user a ticket represents if it did not strictly require a Kerberos PAC and always use the SIDs found within. The result could include total domain compromise.

The DBLink module in PostgreSQL 8.2 before 8.2.6, 8.1 before 8.1.11, 8.0 before 8.0.15, 7.4 before 7.4.19, and 7.3 before 7.3.21, when local trust or ident authentication is used, allows remote attackers to gain privileges via unspecified vectors. NOTE: this issue exists because of an incomplete fix for CVE-2007-3278.

Fedora Commons before 2.2.1 does not properly handle certain authentication requests involving Java Naming and Directory Interface (JNDI), related to (1) a nonexistent account name in combination with an empty password, which allows remote attackers to trigger a certain "unexpected / strange response" from an LDAP server, and (2) a reauthentication attempt that throws an exception, which allows remote attackers to trigger use of a cached authentication decision. NOTE: authentication can be bypassed by using vector 1 followed by vector 2, and possibly can be bypassed by using a single vector.

In ectd before versions 3.4.10 and 3.3.23, gateway TLS authentication is only applied to endpoints detected in DNS SRV records. When starting a gateway, TLS authentication will only be attempted on endpoints identified in DNS SRV records for a given domain, which occurs in the discoverEndpoints function. No authentication is performed against endpoints provided in the --endpoints flag. This has been fixed in versions 3.4.10 and 3.3.23 with improved documentation and deprecation of the functionality.

A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly.

OpenVPN 2.1 until v2.4.12 and v2.5.6 may enable authentication bypass in external authentication plug-ins when more than one of them makes use of deferred authentication replies, which allows an external user to be granted access with only partially correct credentials.

A vulnerability was found in the 389 Directory Server that allows expired passwords to access the database to cause improper authentication.

It was found that nmcli, a command line interface to NetworkManager did not honour 802-1x.ca-path and 802-1x.phase2-ca-path settings, when creating a new profile. When a user connects to a network using this profile, the authentication does not happen and the connection is made insecurely.

An invalid authentication sequence could result in the hostapd process terminating due to missing state validation steps when processing the SAE confirm message when in hostapd/AP mode. All version of hostapd with SAE support are vulnerable. An attacker may force the hostapd process to terminate, performing a denial of service attack. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected.

The implementations of EAP-PWD in hostapd EAP Server and wpa_supplicant EAP Peer do not validate the scalar and element values in EAP-pwd-Commit. This vulnerability may allow an attacker to complete EAP-PWD authentication without knowing the password. However, unless the crypto library does not implement additional checks for the EC point, the attacker will not be able to derive the session key or complete the key exchange. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

The implementations of EAP-PWD in hostapd EAP Server, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may be able to use invalid scalar/element values to complete authentication, gaining session key and network access without needing or learning the password. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

The implementations of EAP-PWD in wpa_supplicant EAP Peer, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may complete authentication, session key and control of the data connection with a client. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

An authentication flaw was found in ceph in versions before 14.2.20. When the monitor handles CEPHX_GET_AUTH_SESSION_KEY requests, it doesn't sanitize other_keys, allowing key reuse. An attacker who can request a global_id can exploit the ability of any user to request a global_id previously associated with another user, as ceph does not force the reuse of old keys to generate new ones. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

It was found that 389-ds-base since 1.3.6.1 up to and including 1.4.0.3 did not always handle internal hash comparison operations correctly during the authentication process. A remote, unauthenticated attacker could potentially use this flaw to bypass the authentication process under very rare and specific circumstances.

IBM Rational Policy Tester 8.5 before 8.5.0.5 does not properly check authorization for changes to the set of authentication hosts, which allows remote authenticated users to perform spoofing attacks involving an HTTP redirect via unspecified vectors.

Blue Ocean allows the creation of GitHub organization folders that are set up to scan a GitHub organization for repositories and branches containing a Jenkinsfile, and create corresponding pipelines in Jenkins. It did not properly check the current user's authentication and authorization when configuring existing GitHub organization folders. This allowed users with read access to the GitHub organization folder to reconfigure it, including changing the GitHub API endpoint for the organization folder to an attacker-controlled server to obtain the GitHub access token, if the organization folder was initially created using Blue Ocean.

Puppet Enterprise (PE) before 2.6.1 does not properly invalidate sessions when the session secret has changed, which allows remote authenticated users to retain access via unspecified vectors.

The Collaboration Server in IBM InfoSphere Master Data Management Server for Product Information Management 9.x through 9.1 and InfoSphere Master Data Management - Collaborative Edition 10.x through 10.1, 11.0 before FP7, and 11.3 and 11.4 before 11.4 FP1 allows remote authenticated users to modify the administrator's credentials and consequently gain privileges via unspecified vectors.

Cloud Foundry UAA, versions prior to v70.0, allows a user to update their own email address. A remote authenticated user can impersonate a different user by changing their email address to that of a different user.

cgi-bin/userprefs.cgi in Plixer International Scrutinizer NetFlow & sFlow Analyzer before 9.0.1.19899 does not validate user permissions, which allow remote attackers to add user accounts with administrator privileges via the newuser, pwd, and selectedUserGroup parameters.

Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.

Vivoh Webinar Manager before 3.6.3.0 has improper API authentication. When a user logs in to the administration configuration web portlet, a VIVOH_AUTH cookie is assigned so that they can be uniquely identified. Certain APIs can be successfully executed without proper authentication. This can let an attacker impersonate as victim and make state changing requests on their behalf.

An Improper Authentication issue was discovered in General Motors (GM) and Shanghai OnStar (SOS) SOS iOS Client 7.1. Successful exploitation of this vulnerability may allow an attacker to subvert security mechanisms and reset a user account password.

Broken Authentication in Atlassian Connect Express (ACE) from version 3.0.2 before version 6.6.0: Atlassian Connect Express is a Node.js package for building Atlassian Connect apps. Authentication between Atlassian products and the Atlassian Connect Express app occurs with a server-to-server JWT or a context JWT. Atlassian Connect Express versions from 3.0.2 before 6.6.0 erroneously accept context JWTs in lifecycle endpoints (such as installation) where only server-to-server JWTs should be accepted, permitting an attacker to send authenticated re-installation events to an app.

Broken Authentication in Atlassian Connect Spring Boot (ACSB) from version 1.1.0 before version 2.1.3: Atlassian Connect Spring Boot is a Java Spring Boot package for building Atlassian Connect apps. Authentication between Atlassian products and the Atlassian Connect Spring Boot app occurs with a server-to-server JWT or a context JWT. Atlassian Connect Spring Boot versions from version 1.1.0 before version 2.1.3 erroneously accept context JWTs in lifecycle endpoints (such as installation) where only server-to-server JWTs should be accepted, permitting an attacker to send authenticated re-installation events to an app.

admin.htm in Geo++ GNCASTER 1.4.0.7 and earlier does not properly enforce HTTP Digest Authentication, which allows remote authenticated users to use HTTP Basic Authentication, bypassing intended server policy.

An improper authentication in Fortinet FortiManager version 6.4.3 and below, 6.2.6 and below allows attacker to assign arbitrary Policy and Object modules via crafted requests to the request handler.