SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.

Symantec Ghost Solution Suite 1.1 before 1.1 patch 2, 2.0.0, and 2.0.1 does not authenticate connections between the console and the Ghost Management Agent, which allows remote attackers to execute arbitrary commands via unspecified RPC requests in conjunction with ARP spoofing.

console-io is a module that allows users to implement a web console in their application. A malicious user could bypass the authentication and execute any command that the user who is running the console-io application 2.2.13 and earlier is able to run. This means that if console-io was running from root, the attacker would have full access to the system. This vulnerability exists because the console-io application does not configure socket.io to require authentication, which allows a malicious user to connect via a websocket to send commands and receive the response.

4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

Unspecified vulnerability in the Header Image Module before 5.x-1.1 for Drupal allows remote attackers to access the administration pages via unknown attack vectors.

The administration panel on the Airspan WiMax ProST 4.1 antenna with 6.5.38.0 software does not verify authentication credentials, which allows remote attackers to (1) upload malformed firmware or (2) bind the antenna to a different WiMAX base station via unspecified requests to forms under process_adv/.

Xiaongmai AHB7008T-MH-V2, AHB7804R-ELS, AHB7804R-MH-V2, AHB7808R-MS-V2, AHB7808R-MS, AHB7808T-MS-V2, AHB7804R-LMS, HI3518_50H10L_S39 V4.02.R11.7601.Nat.Onvif.20170420, V4.02.R11.Nat.Onvif.20160422, V4.02.R11.7601.Nat.Onvif.20170424, V4.02.R11.Nat.Onvif.20170327, V4.02.R11.Nat.Onvif.20161205, V4.02.R11.Nat.20170301, V4.02.R12.Nat.OnvifS.20170727 is affected by a backdoor in the macGuarder and dvrHelper binaries of DVR/NVR/IP camera firmware due to static root account credentials in the system.

The FTP server on the Linksys WRT54G 7 router with 7.00.1 firmware does not verify authentication credentials, which allows remote attackers to establish an FTP session by sending an arbitrary username and password.

Advantech EKI-132x devices with firmware before 2015-12-31 allow remote attackers to bypass authentication via unspecified vectors.

Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 allows remote attackers to obtain administrative access by entering an unspecified password during a (1) SSH or (2) TELNET session.

Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.

An issue was discovered on Shenzhen Coship RT3050 4.0.0.40, RT3052 4.0.0.48, RT7620 10.0.0.49, WM3300 5.0.0.54, and WM3300 5.0.0.55 devices. The password reset functionality of the router doesn't have backend validation for the current password and doesn't require any type of authentication. By making a POST request to the apply.cgi file of the router, the attacker can change the admin username and password of the router.

Impero Education Pro before 5105 relies on the -1|AUTHENTICATE\x02PASSWORD string for authentication, which allows remote attackers to execute arbitrary programs via an encrypted command.

The telnet service in LevelOne WBR-3460 4-Port ADSL 2/2+ Wireless Modem Router with firmware 1.00.11 and 1.00.12 does not require authentication, which allows remote attackers on the local or wireless network to obtain administrative access.

The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.

MicroNews allows remote attackers to bypass authentication and gain administrative privileges via a direct request to admin.php.

Unspecified vulnerability in HP Select Identity 4.01 through 4.01.010 and 4.10 through 4.13.001 allows remote attackers to obtain unspecified access via unknown vectors.

The Thomson/Alcatel SpeedTouch 7G router, as used for the BT Home Hub 6.2.6.B and earlier, allows remote attackers on an intranet to bypass authentication and gain administrative access via vectors including a '/' (slash) character at the end of the PATH_INFO to cgi/b, aka "double-slash auth bypass." NOTE: remote attackers outside the intranet can exploit this by leveraging a separate CSRF vulnerability. NOTE: SpeedTouch 780 might also be affected by some of these issues.

Anyterm Daemon in Infoblox Network Automation NetMRI before NETMRI-23483 allows remote attackers to execute arbitrary commands with root privileges via a crafted terminal/anyterm-module request.

Multiple command handlers in CA (Computer Associates) BrightStor ARCserve Backup for Laptops and Desktops r11.0 through r11.5 do not verify if a peer is authenticated, which allows remote attackers to add and delete users, and start client restores.

The Vonage Motorola Phone Adapter VT 2142-VD does not properly verify that a SIP INVITE message originated from a legitimate server, which allows remote attackers to send spoofed INVITE messages, as demonstrated by a flood of messages triggering a denial of service, and by phone calls with malicious content.

The management interface in Cisco TelePresence Video Communication Server (VCS) and Cisco Expressway before X7.2.4, X8 before X8.1.2, and X8.2 before X8.2.2 and Cisco TelePresence Conductor before X2.3.1 and XC2.4 before XC2.4.1 allows remote attackers to bypass authentication via crafted login parameters, aka Bug IDs CSCur02680 and CSCur05556.

NetSupport Manager Client before 10.20.0004 allows remote attackers to bypass the (1) basic and (2) authentication schemes by spoofing the NetSupport Manager.

Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.

IBM General Parallel File System (GPFS) 3.4 before 3.4.0.32, 3.5 before 3.5.0.24, and 4.1 before 4.1.0.7 in certain cipherList configurations allows remote attackers to bypass authentication and execute arbitrary programs as root via unspecified vectors.

The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.

An issue was discovered in MK-AUTH 19.01. There is authentication bypass in the web login functionality because guessable credentials to admin/executar_login.php result in admin access.

VMware vCenter Server 4.0 before Update 4b and 4.1 before Update 3a, VMware VirtualCenter 2.5, VMware vSphere Client 4.0 before Update 4b and 4.1 before Update 3a, VMware VI-Client 2.5, VMware ESXi 3.5 through 4.1, and VMware ESX 3.5 through 4.1 do not properly implement the management authentication protocol, which allow remote servers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors.

The login method in LoginModule implementations in Apache Geronimo 2.0 does not throw FailedLoginException for failed logins, which allows remote attackers to bypass authentication requirements, deploy arbitrary modules, and gain administrative access by sending a blank username and password with the command line deployer in the deployment module.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Firmware can be updated over the network without authentication, which may allow remote code execution.

The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr parameter to ping.ccp.

Session fixation vulnerability in HP Systems Insight Manager (SIM) 4.2 and 5.0 SP4 and SP5 allows remote attackers to hijack web sessions by setting the JSESSIONID cookie.

webSPELL 4.0, and possibly later versions, allows remote attackers to bypass authentication via a ws_auth cookie, a different vulnerability than CVE-2006-4782.

The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time

Unspecified vulnerability in a cryptographic feature in MailEnable Standard Edition before 1.93, Professional Edition before 1.73, and Enterprise Edition before 1.21 leads to "weakened authentication security" with unknown impact and attack vectors. NOTE: due to lack of details, it is not clear whether this is the same as CVE-2006-1792.

An authentication bypass vulnerability in Juniper Networks Junos Space Network Management Platform may allow a remote unauthenticated network based attacker to login as any privileged user. This issue only affects Junos Space Network Management Platform 17.1R1 without Patch v1 and 16.1 releases prior to 16.1R3. This issue was found by an external security researcher.

Improper Authentication vulnerability in S&D smarthome(smartcare) application can cause authentication bypass and information exposure. Remote attackers can use this vulerability to take control of the home environment including indoor control.

Unspecified vulnerability in Trend Micro ServerProtect 5.7 and 5.58 allows remote attackers to execute arbitrary code via vectors related to obtaining "administrative access to the RPC interface."

D-Link DNS-320L firmware before 1.04b12, DNS-327L before 1.03b04 Build0119, DNR-326 1.40b03, DNS-320B 1.02b01, DNS-345 1.03b06, DNS-325 1.05b03, and DNS-322L 2.00b07 allow remote attackers to bypass authentication and log in with administrator permissions by passing the cgi_set_wto command in the cmd parameter, and setting the spawned session's cookie to username=admin.

Login with hash: The login routine allows the client to log in to the system not by using the password, but by using the hash of the password. Combined with CVE-2021-23858, this allows an attacker to subsequently login to the system.

In multiple Tecson Tankspion and GOKs SmartBox 4 products the affected application doesn't properly restrict access to an endpoint that is responsible for saving settings, to a unauthenticated user with limited access rights. Based on the lack of adequately implemented access-control rules, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to change the application settings without authenticating at all, which violates originally laid ACL rules.

A business logic issue in the MStore API WordPress plugin, versions before 3.2.0, had an authentication bypass with Sign In With Apple allowing unauthenticated users to recover an authentication cookie with only an email address.

The Java Glassfish Admin Console in HP Executive Scorecard 9.40 and 9.41 does not require authentication, which allows remote attackers to execute arbitrary code via a session on TCP port 10001, aka ZDI-CAN-2116.

Unify OpenStage/OpenScape Desk Phone IP SIP before V3 R3.11.0 has an authentication bypass in the default mode of the Workpoint Interface

HP Support Assistant before 8.1.52.1 allows remote attackers to bypass authentication via unspecified vectors.

Schrack Technik microControl with firmware before 1.7.0 (937) stores sensitive information under the web root with insufficient access control, which allows remote attackers to obtain access data for the ftp and telnet services via a direct request for ZTPUsrDtls.txt.

TIBCO Enterprise Administrator 1.0.0 and Enterprise Administrator SDK 1.0.0 do not properly enforce administrative authentication requirements, which allows remote attackers to execute arbitrary commands via unspecified vectors.

The administrative interface in Allied Telesis AT-RG634A ADSL Broadband router 3.3+, iMG624A firmware 3.5, iMG616LH firmware 2.4, and iMG646BD firmware 3.5 allows remote attackers to gain privileges and execute arbitrary commands via a direct request to cli.html.