scripts/license.pl in Veritas NetBackup Appliance 2.6.0.x through 2.6.0.4, 2.6.1.x through 2.6.1.2, 2.7.x through 2.7.3, and 3.0.x allow remote attackers to execute arbitrary commands via shell metacharacters in the hostName parameter to appliancews/getLicense.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK40 before 2.5.1.16, RBR40 before 2.5.1.16, RBS40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, and RBS50Y before 2.6.1.40.

Directory traversal vulnerability in cgi-bin/rftest.cgi on Crestron AirMedia AM-100 devices with firmware before 1.4.0.13 allows remote attackers to execute arbitrary commands via a .. (dot dot) in the ATE_COMMAND parameter.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

Unauthenticated Remote Command injection as root occurs in the Western Digital MyCloud NAS 2.11.142 index.php page via a modified Cookie header.

Unauthenticated Remote Command injection as root occurs in the Western Digital MyCloud NAS 2.11.142 /web/google_analytics.php URL via a modified arg parameter in the POST data.

China Mobile An Lianbao WF-1 v1.0.1 router web interface through /api/ZRMacClone/mac_addr_clone receives parameters by POST request, and the parameter macType has a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

Synology Video Station before 1.5-0763 allows remote attackers to execute arbitrary shell commands via shell metacharacters in the subtitle_codepage parameter to subtitle.cgi.

Endian Firewall before 3.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) NEW_PASSWORD_1 or (2) NEW_PASSWORD_2 parameter to cgi-bin/chpasswd.cgi.

Module::Signature before 0.74 allows remote attackers to execute arbitrary shell commands via a crafted SIGNATURE file which is not properly handled when generating checksums from a signed manifest.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1938.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1986.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

Buffer overflow in an ActiveX control in MDraw30.ocx in Schneider Electric ProClima before 6.1.7 allows remote attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-8513 and CVE-2014-8514. NOTE: this may be clarified later based on details provided by researchers.

The eslint-fixer package through 0.1.5 for Node.js allows command injection via shell metacharacters to the fix function. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. The ozum/eslint-fixer GitHub repository has been intentionally deleted

VMware Horizon View Client (2.x, 3.x and 4.x prior to 4.5.0) contains a command injection vulnerability in the service startup script. Successful exploitation of this issue may allow unprivileged users to escalate their privileges to root on the Mac OSX system where the client is installed.

Seagate BlackArmor NAS devices with firmware sg2000-2000.1331 allow remote attackers to execute arbitrary commands via shell metacharacters in the ip parameter to backupmgt/getAlias.php.

Sharp NEC Displays ((UN462A R1.300 and prior to it, UN462VA R1.300 and prior to it, UN492S R1.300 and prior to it, UN492VS R1.300 and prior to it, UN552A R1.300 and prior to it, UN552S R1.300 and prior to it, UN552VS R1.300 and prior to it, UN552 R1.300 and prior to it, UN552V R1.300 and prior to it, UX552S R1.300 and prior to it, UX552 R1.300 and prior to it, V864Q R2.000 and prior to it, C861Q R2.000 and prior to it, P754Q R2.000 and prior to it, V754Q R2.000 and prior to it, C751Q R2.000 and prior to it, V984Q R2.000 and prior to it, C981Q R2.000 and prior to it, P654Q R2.000 and prior to it, V654Q R2.000 and prior to it, C651Q R2.000 and prior to it, V554Q R2.000 and prior to it, P404 R3.200 and prior to it, P484 R3.200 and prior to it, P554 R3.200 and prior to it, V404 R3.200 and prior to it, V484 R3.200 and prior to it, V554 R3.200 and prior to it, V404-T R3.200 and prior to it, V484-T R3.200 and prior to it, V554-T R3.200 and prior to it, C501 R2.000 and prior to it, C551 R2.000 and prior to it, C431 R2.000 and prior to it) allows an attacker a buffer overflow and to execute remote code by sending long parameters that contains specific characters in http request.

Emerson Process Management ROC800 RTU with software 3.50 and earlier, DL8000 RTU with software 2.30 and earlier, and ROC800L RTU with software 1.20 and earlier allows remote attackers to execute arbitrary commands via a TCP replay attack.

A vulnerability was determined in Sangfor Operation and Maintenance Management System up to 3.0.8. Impacted is the function WriterHandle.getCmd of the file /isomp-protocol/protocol/getCmd. This manipulation of the argument sessionPath causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "The product in question TEW-731RE for CVE-2025-15471 has been discontinued and end of life since October 23, 2020. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on the website product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Shiguangwu sgwbox N3 2.0.25. Affected is an unknown function of the file /usr/sbin/http_eshell_server of the component DOCKER Feature. Performing manipulation of the argument params results in command injection. The attack may be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

fs-path node module before 0.0.25 is vulnerable to command injection by way of user-supplied inputs via the `copy`, `copySync`, `remove`, and `removeSync` methods.

A vulnerability was determined in Shiguangwu sgwbox N3 2.0.25. This affects an unknown function of the component SHARESERVER Feature. This manipulation of the argument params causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET do not properly verify patch files. Attackers can inject a specific command into a patch file and gain access to the system.

Adobe Digital Editions versions 4.5.10 and below have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

An unauthenticated network-based attacker able to send a maliciously crafted LLDP packet to the local segment, through a local segment broadcast, may be able to cause a Junos device to enter an improper boundary check condition allowing a memory corruption to occur, leading to a denial of service. Further crafted packets may be able to sustain the denial of service condition. Score: 6.5 MEDIUM (CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) Further, if the attacker is authenticated on the target device receiving and processing the malicious LLDP packet, while receiving the crafted packets, the attacker may be able to perform command or arbitrary code injection over the target device thereby elevating their permissions and privileges, and taking control of the device. Score: 7.8 HIGH (CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H) An unauthenticated network-based attacker able to send a maliciously crafted LLDP packet to one or more local segments, via LLDP proxy / tunneling agents or other LLDP through Layer 3 deployments, through one or more local segment broadcasts, may be able to cause multiple Junos devices to enter an improper boundary check condition allowing a memory corruption to occur, leading to multiple distributed Denials of Services. These Denials of Services attacks may have cascading Denials of Services to adjacent connected devices, impacts network devices, servers, workstations, etc. Further crafted packets may be able to sustain these Denials of Services conditions. Score 6.8 MEDIUM (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H) Further, if the attacker is authenticated on one or more target devices receiving and processing these malicious LLDP packets, while receiving the crafted packets, the attacker may be able to perform command or arbitrary code injection over multiple target devices thereby elevating their permissions and privileges, and taking control multiple devices. Score: 7.8 HIGH (CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H) Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71; 12.3 versions prior to 12.3R12-S7; 12.3X48 versions prior to 12.3X48-D55; 14.1 versions prior to 14.1R8-S5, 14.1R9; 14.1X53 versions prior to 14.1X53-D46, 14.1X53-D50, 14.1X53-D107; 14.2 versions prior to 14.2R7-S9, 14.2R8; 15.1 versions prior to 15.1F2-S17, 15.1F5-S8, 15.1F6-S8, 15.1R5-S7, 15.1R7; 15.1X49 versions prior to 15.1X49-D90; 15.1X53 versions prior to 15.1X53-D65; 16.1 versions prior to 16.1R4-S6, 16.1R5; 16.1X65 versions prior to 16.1X65-D45; 16.2 versions prior to 16.2R2; 17.1 versions prior to 17.1R2. No other Juniper Networks products or platforms are affected by this issue.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

The Screensavercc component in eLux RP before 5.5.0 allows attackers to bypass intended configuration restrictions and execute arbitrary commands with root privileges by inserting commands in a local configuration dialog in the control panel.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the GET parameters passed in this request (to test if SMB credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "cgibox" is the one that has the vulnerable function "sub_7EAFC" that receives the values sent by the GET request. If we open this binary in IDA-pro we will notice that this follows a ARM little endian format. The function sub_7EAFC in IDA pro is identified to be receiving the values sent in the GET request and the value set in GET parameter "user" is extracted in function sub_7E49C which is then passed to the vulnerable system API call.

Command Injection in Simiki v1.6.2.1 and prior allows remote attackers to execute arbitrary system commands via line 64 of the component 'simiki/blob/master/simiki/config.py'.

In SolarWinds Log & Event Manager (LEM) before 6.3.1 Hotfix 4, a menu system is encountered when the SSH service is accessed with "cmc" and "password" (the default username and password). By exploiting a vulnerability in the restrictssh feature of the menuing script, an attacker can escape from the restricted shell.

A Command Injection vulnerability in Schneider Electric homeLYnk Controller exists in all versions before 1.5.0.

In EMC VNX2 versions prior to OE for File 8.1.9.211 and VNX1 versions prior to OE for File 7.1.80.8, an unauthenticated remote attacker may be able to elevate their permissions to root through a command injection. This may potentially be exploited by an attacker to run arbitrary code with root-level privileges on the targeted VNX Control Station system, aka remote code execution.

An issue was discovered on Wireless IP Camera (P2P) WIFICAM cameras. There is Command Injection in the set_ftp.cgi script via shell metacharacters in the pwd variable, as demonstrated by a set_ftp.cgi?svr=192.168.1.1&port=21&user=ftp URI.

picocom before 2.0 has a command injection vulnerability in the 'send and receive file' command because the command line is executed by /bin/sh unsafely.

Adobe Photoshop CC versions 19.1.8 and earlier and 20.0.5 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

An issue was discovered on ASMAX AR-804gu 66.34.1 devices. There is Command Injection via the cgi-bin/script query string.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < 2.15.1), RUGGEDCOM ROX MX5000RE (All versions < 2.15.1), RUGGEDCOM ROX RX1400 (All versions < 2.15.1), RUGGEDCOM ROX RX1500 (All versions < 2.15.1), RUGGEDCOM ROX RX1501 (All versions < 2.15.1), RUGGEDCOM ROX RX1510 (All versions < 2.15.1), RUGGEDCOM ROX RX1511 (All versions < 2.15.1), RUGGEDCOM ROX RX1512 (All versions < 2.15.1), RUGGEDCOM ROX RX1524 (All versions < 2.15.1), RUGGEDCOM ROX RX1536 (All versions < 2.15.1), RUGGEDCOM ROX RX5000 (All versions < 2.15.1). Affected devices do not properly validate user input, making them susceptible to command injection. An attacker with access to either the shell or the web CLI with administrator privileges could access the underlying operating system as the root user.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/setAdInfoDetail.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/setPicListItem.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /cgi-bin/uploadAccessCodePic.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/SetInternetLanInfo.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/delAd.