MailGates and MailAudit products contain Command Injection flaw, which can be used to inject and execute system commands from the cgi parameter after attackers obtain the user’s access token.

An issue was discovered in SolarWinds N-Central 12.3.0.670. The sudo configuration has incorrect access control because the nable web user account is effectively able to run arbitrary OS commands as root (i.e., the use of root privileges is not limited to specific programs listed in the sudoers file).

UCOPIA Wi-Fi appliances 6.0.5 allow authenticated remote attackers to escape the restricted administration shell CLI, and access a shell with admin user rights, via an unprotected less command.

Multiple vulnerabilities in Cisco Jabber for Windows, Jabber for MacOS, and Jabber for mobile platforms could allow an attacker to execute arbitrary programs on the underlying operating system (OS) with elevated privileges or gain access to sensitive information. For more information about these vulnerabilities, see the Details section of this advisory.

TOTOLINK A3002RU-V2.0.0 B20190814.1034 allows authenticated remote users to modify the system's 'Run Command'. An attacker can use this functionality to execute arbitrary OS commands on the router.

Ubiquiti Networks EdgeSwitch version 1.7.3 and prior suffer from an improperly neutralized element in an OS command due to lack of protection on the admin CLI, leading to code execution and privilege escalation greater than administrators themselves are allowed. An attacker with access to an admin account could escape the restricted CLI and execute arbitrary shell instructions.

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

An issue was discovered in includes/webconsole.php in RaspAP 2.5. With authenticated access, an attacker can use a misconfigured (and virtually unrestricted) web console to attack the underlying OS (Raspberry Pi) running this software, and execute commands on the system (including ones for uploading of files and execution of code).

Atop Technology industrial 3G/4G gateway contains Command Injection vulnerability. Due to insufficient input validation, the device's web management interface allows attackers to inject specific code and execute system commands without privilege.

An issue was discovered in Xorux Lpar2RRD 6.11 and Stor2RRD 2.61, as distributed in Xorux 2.41. They do not correctly verify the integrity of an upgrade package before processing it. As a result, official upgrade packages can be modified to inject an arbitrary Bash script that will be executed by the underlying system. It is possible to achieve this by modifying the values in the files.SUM file (which are used for integrity control) and injecting malicious code into the upgrade.sh file.

The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'.

Openshift has shell command injection flaws due to unsanitized data being passed into shell commands.

TP-Link TL-WA850RE Wi-Fi Range Extender with hardware version 5 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the wps_setup_pin parameter to /data/wps.setup.json.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.5.x: 6.5.4.17 and below; Aruba Instant 8.3.x: 8.3.0.13 and below; Aruba Instant 8.5.x: 8.5.0.10 and below; Aruba Instant 8.6.x: 8.6.0.5 and below; Aruba Instant 8.7.x: 8.7.0.0 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

An issue was discovered on Gemtek WRTM-127ACN 01.01.02.141 and WRTM-127x9 01.01.02.127 devices. The Monitor Diagnostic network page allows an authenticated attacker to execute a command directly on the target machine. Commands are executed as the root user (uid 0). (Even if a login is required, most routers are left with default credentials.)

httpd on TP-Link TL-WPA4220 devices (versions 2 through 4) allows remote authenticated users to execute arbitrary OS commands by sending crafted POST requests to the endpoint /admin/powerline. Fixed version: TL-WPA4220(EU)_V4_201023

An OS Command Injection vulnerability in the PAN-OS management interface that allows authenticated administrators to execute arbitrary OS commands with root privileges. This issue impacts: PAN-OS 9.0 versions earlier than 9.0.10; PAN-OS 9.1 versions earlier than 9.1.4; PAN-OS 10.0 versions earlier than 10.0.1.

iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script.

/graphStatus/displayServiceStatus.php in Centreon 19.10.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the RRDdatabase_path parameter.

Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place.

An OS Command Injection vulnerability in the PAN-OS management interface that allows authenticated administrators to execute arbitrary OS commands with root privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.3.

An OS command injection and external control of filename vulnerability in Palo Alto Networks PAN-OS allows authenticated administrators to execute code with root privileges or delete arbitrary system files and impact the system's integrity or cause a denial of service condition. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14.

Jenkins CryptoMove Plugin 0.1.33 and earlier allows attackers with Job/Configure access to execute arbitrary OS commands on the Jenkins master as the OS user account running Jenkins.

McAfee Email Gateway 7.6 allows remote authenticated administrators to execute arbitrary commands via shell metacharacters in the value attribute in a (1) TestFile XML element or the (2) hostname. NOTE: this issue can be combined with CVE-2013-7092 to allow remote attackers to execute commands.

An OS command injection vulnerability in the management server component of PAN-OS allows an authenticated user to potentially execute arbitrary commands with root privileges. This issue affects: All PAN-OS 7.1 versions; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

An OS Command Injection vulnerability in PAN-OS management server allows authenticated users to inject and execute arbitrary shell commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

An OS command injection and memory corruption vulnerability in the PAN-OS management web interface that allows authenticated administrators to disrupt system processes and potentially execute arbitrary code and OS commands with root privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.4; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.

Artica Web Proxy 4.30.000000 allows an authenticated remote attacker to inject commands via the service-cmds parameter in cyrus.php. These commands are executed with root privileges via service_cmds_peform.

OS Command Injection in upload.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands by modifying the filename POST parameter.

USVN (aka User-friendly SVN) before 1.0.9 allows remote code execution via shell metacharacters in the number_start or number_end parameter to LastHundredRequest (aka lasthundredrequestAction) in the Timeline module. NOTE: this may overlap CVE-2020-25069.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

An OS command injection vulnerability in the web administration component of Micro Focus Secure Messaging Gateway (SMG) allows a remote attacker authenticated as a privileged user to execute arbitrary OS commands on the SMG server. This can be exploited in conjunction with CVE-2018-12464 to achieve unauthenticated remote code execution. Affects Micro Focus Secure Messaging Gateway versions prior to 471. It does not affect previous versions of the product that used GWAVA product name (i.e. GWAVA 6.5).

SQL injection vulnerability in the Help Desk application in Wave EMBASSY Remote Administration Server (ERAS) allows remote authenticated users to execute arbitrary SQL commands via the ct100$4MainController$TextBoxSearchValue parameter (aka the search field), leading to execution of operating-system commands.

ginkgosnmp.inc in HP System Management Homepage (SMH) allows remote authenticated users to execute arbitrary commands via shell metacharacters in the PATH_INFO to smhutil/snmpchp.php.en.

The ping page of the administration panel in Telmat AccessLog <= 6.0 (TAL_20180415) allows an attacker to get root shell access via authenticated code injection over the network.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

EyesOfNetwork 5.1 allows Remote Command Execution via shell metacharacters in the module/tool_all/ host field.

OS command injection vulnerability in the "qs" procedure from the "utils" module in Chicken before 4.9.0.

NeDi 1.9C is vulnerable to Remote Command Execution. pwsec.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a pw parameter. (This can also be exploited via CSRF.)

OCS Inventory 2.4.1 is prone to a remote command-execution vulnerability. Specifically, this issue occurs because the content of the ipdiscover_analyser rzo GET parameter is concatenated to a string used in an exec() call in the PHP code. Authentication is needed in order to exploit this vulnerability.

mailcow is a mailserver suite. Prior to mailcow-dockerized version 2022-06a, an extended privilege vulnerability can be exploited by manipulating the custom parameters regexmess, skipmess, regexflag, delete2foldersonly, delete2foldersbutnot, regextrans2, pipemess, or maxlinelengthcmd to execute arbitrary code. Users should update their mailcow instances with the `update.sh` script in the mailcow root directory to 2022-06a or newer to receive a patch for this issue. As a temporary workaround, the Syncjob ACL can be removed from all mailbox users, preventing changes to those settings.

The Ping and Traceroute features on TP-Link TL-WR841N v13 00000001 0.9.1 4.16 v0001.0 Build 180119 Rel.65243n devices allow authenticated blind Command Injection.

Polycom HDX Video End Points before 3.0.4 and UC APL before 2.7.1.J allows remote authenticated users to execute arbitrary commands as demonstrated by a ; (semicolon) to the ping command feature.

OS command injection in group.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root by modifying the "name" POST parameter.

The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.9 and 4.1.x before 4.1.2 allows remote authenticated administrators to execute arbitrary commands via unspecified vectors, aka Ref ID 34595.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device.

The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.10 and 4.0.x before 4.0.4 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 30122.

In QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8, the local www-data user can execute sudo mysql without a password, which means that the www-data user can execute arbitrary OS commands via the mysql -e option.