Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to obtain potentially sensitive information about pointer values by leveraging access to a WebUI renderer process.

roundcube webmail Alpha, with a default high verbose level ($rcmail_config['debug_level'] = 1), allows remote attackers to obtain the full path of the application via an invalid_task parameter, which leaks the path in an error message.

IBM Sametime allows remote attackers to obtain sensitive information from the Sametime Log database via a direct request to STLOG.NSF. IBM X-Force ID: 78048.

Survey Solutions is a survey management and data collection system. In affected versions the Headquarters application publishes /metrics endpoint available to any user. None of the survey answers are ever exposed, only the aggregate counters, including count of interviews, or count of assignments. Starting from version 21.09.1 the endpoint is turned off by default.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, an attacker can perform a SIP digest leak attack against FreeSWITCH and receive the challenge response of a gateway configured on the FreeSWITCH server. This is done by challenging FreeSWITCH's SIP requests with the realm set to that of the gateway, thus forcing FreeSWITCH to respond with the challenge response which is based on the password of that targeted gateway. Abuse of this vulnerability allows attackers to potentially recover gateway passwords by performing a fast offline password cracking attack on the challenge response. The attacker does not require special network privileges, such as the ability to sniff the FreeSWITCH's network traffic, to exploit this issue. Instead, what is required for this attack to work is the ability to cause the victim server to send SIP request messages to the malicious party. Additionally, to exploit this issue, the attacker needs to specify the correct realm which might in some cases be considered secret. However, because many gateways are actually public, this information can easily be retrieved. The vulnerability appears to be due to the code which handles challenges in `sofia_reg.c`, `sofia_reg_handle_sip_r_challenge()` which does not check if the challenge is originating from the actual gateway. The lack of these checks allows arbitrary UACs (and gateways) to challenge any request sent by FreeSWITCH with the realm of the gateway being targeted. This issue is patched in version 10.10.7. Maintainers recommend that one should create an association between a SIP session for each gateway and its realm to make a check be put into place for this association when responding to challenges.

The Sleipnir Mobile application before 2.1.0 and Sleipnir Mobile Black Edition application before 2.1.0 for Android do not properly implement the WebView class, which allows remote attackers to obtain sensitive information via a crafted application.

All versions of Apache Santuario - XML Security for Java prior to 2.2.3 and 2.1.7 are vulnerable to an issue where the "secureValidation" property is not passed correctly when creating a KeyInfo from a KeyInfoReference element. This allows an attacker to abuse an XPath Transform to extract any local .xml files in a RetrievalMethod element.

The Meeting Server in IBM Sametime 8.x through 8.5.2.1 and 9.x through 9.0.0.1 allows remote attackers to obtain unspecified installation information and technical data via a request to a public page.

Discourse-reactions is a plugin for the Discourse platform that allows user to add their reactions to the post. In affected versions reactions given by user to secure topics and private messages are visible. This issue is patched in version 0.2 of discourse-reaction. Users who are unable to update are advised to disable the Discourse-reactions plugin in admin panel.

Telephony application has a Exposure of Sensitive Information to an Unauthorized Actor vulnerability.Successful exploitation of this vulnerability could lead to sensitive information disclosure.

MyHuawei-App has a Exposure of Sensitive Information to an Unauthorized Actor vulnerability.Successful exploitation of this vulnerability could compromise confidentiality.

routerlist.c in Tor before 0.2.2.38 uses a different amount of time for relay-list iteration depending on which relay is chosen, which might allow remote attackers to obtain sensitive information about relay selection via a timing side-channel attack.

IBM QRadar SIEM 7.3.0 through 7.3.3 discloses sensitive information to unauthorized users. The information can be used to mount further attacks on the system. IBM X-Force ID: 166355.

IBM Cloud App Management 2019.3.0 and 2019.4.0 reveals a stack trace on certain API requests which can allow an attacker further information about the implementation of the offering. IBM X-Force ID: 173311.

sylius/paypal-plugin is a paypal plugin for the Sylius development platform. In affected versions the URL to the payment page done after checkout was created with autoincremented payment id (/pay-with-paypal/{id}) and therefore it was easy to predict. The problem is that the Credit card form has prefilled "credit card holder" field with the Customer's first and last name and hence this can lead to personally identifiable information exposure. Additionally, the mentioned form did not require authentication. The problem has been patched in Sylius/PayPalPlugin 1.2.4 and 1.3.1. If users are unable to update they can override a sylius_paypal_plugin_pay_with_paypal_form route and change its URL parameters to (for example) {orderToken}/{paymentId}, then override the Sylius\PayPalPlugin\Controller\PayWithPayPalFormAction service, to operate on the payment taken from the repository by these 2 values. It would also require usage of custom repository method. Additionally, one could override the @SyliusPayPalPlugin/payWithPaypal.html.twig template, to add contingencies: ['SCA_ALWAYS'] line in hostedFields.submit(...) function call (line 421). It would then have to be handled in the function callback.

An authorization issue was discovered in the GitLab CE/EE CI badge images endpoint which could result in disclosure of the build status. This vulnerability was addressed in 12.1.2, 12.0.4, and 11.11.6.

Rapid7 Nexpose versions prior to 6.6.114 suffer from an information exposure issue whereby, when the user's session has ended due to inactivity, an attacker can use the inspect element browser feature to remove the login panel and view the details available in the last webpage visited by previous user

IBM Rational Business Developer 8.x before 8.0.1.4 allows remote attackers to obtain potentially sensitive information via a connection to a web service created with the Rational Business Developer product.

An Insufficiently Protected Credentials issue was discovered in Sierra Wireless AirLink Raven XE, all versions prior to 4.0.14, and AirLink Raven XT, all versions prior to 4.0.11. Sensitive information is insufficiently protected during transmission and vulnerable to sniffing, which could lead to information disclosure.

The password reset form in Weblate before 2.10.1 provides different error messages depending on whether the email address is associated with an account, which allows remote attackers to enumerate user accounts via a series of requests.

GLPI is a free Asset and IT management software package. Starting in version 9.2 and prior to version 9.5.6, the telemetry endpoint discloses GLPI and server information. This issue is fixed in version 9.5.6. As a workaround, remove the file `ajax/telemetry.php`, which is not needed for usual functions of GLPI.

`fabric-js` was a malicious module published with the intent to hijack environment variables. It has been unpublished by npm.

wp-admin/includes/class-wp-press-this.php in Press This in WordPress before 4.7.2 does not properly restrict visibility of a taxonomy-assignment user interface, which allows remote attackers to bypass intended access restrictions by reading terms.

CPEs used by subscribers on the access network receive their individual configuration settings from a central GAPS instance. A CPE identifies itself by the MAC address of its WAN interface and a certain "chk" value (48bit) derived from the MAC. The algorithm used to compute the "chk" was disclosed by reverse engineering the CPE's firmware. As a result, it is possible to forge valid "chk" values for any given MAC address and therefore receive the configuration settings of other subscribers' CPEs. The configuration settings often contain sensitive values, for example credentials (username/password) for VoIP services. This issue affects Genexis B.V. GAPS up to 7.2.

A vulnerability was found in TEM FLEX-1080 and FLEX-1085 1.6.0. It has been declared as problematic. This vulnerability log.cgi of the component Log Handler. A direct request leads to information disclosure of hardware information. The attack can be initiated remotely and does not require any form of authentication.

Nextcloud is an open-source, self-hosted productivity platform. The Nextcloud OfficeOnline application prior to version 1.1.1 returned verbatim exception messages to the user. This could result in a full path disclosure on shared files. (e.g. an attacker could see that the file `shared.txt` is located within `/files/$username/Myfolder/Mysubfolder/shared.txt`). It is recommended that the OfficeOnline application is upgraded to 1.1.1. As a workaround, one may disable the OfficeOnline application in the app settings.

The BulletProof Security WordPress plugin is vulnerable to sensitive information disclosure due to a file path disclosure in the publicly accessible ~/db_backup_log.txt file which grants attackers the full path of the site, in addition to the path of database backup files. This affects versions up to, and including, 5.1.

Opera before 12.15 does not properly block top-level domains in Set-Cookie headers, which allows remote attackers to obtain sensitive information by leveraging control of a different web site in the same top-level domain.

IBM Guardium Data Encryption (GDE) 4.0.0.7 and lower stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-Force ID: 213855.

IBM BigFix Platform 9.2 and 9.5 could allow an attacker to query the relay remotely and gather information about the updates and fixlets deployed to the associated sites due to not enabling authenticated access. IBM X-Force ID: 156869.

In all versions of GitLab CE/EE since version 10.6, a project export leaks the external webhook token value which may allow access to the project which it was exported from.

The Gecko Media Plugin sandbox allows access to local files that match specific regular expressions. On OS OX, this matching allows access to some data in subdirectories of "/private/var" that could expose personal or temporary data. This has been updated to not allow access to "/private/var" and its subdirectories. Note: this issue only affects OS X. Other operating systems are not affected. This vulnerability affects Firefox < 52 and Thunderbird < 52.

Exposure of Sensitive Information to an Unauthorized Actor in GitHub repository ionicabizau/parse-url prior to 7.0.0.

IBM Security Verify 10.0.0, 10.0.1.0, and 10.0.2.0 could disclose sensitive version information in HTTP response headers that could aid in further attacks against the system. IBM X-Force ID: 212038

The Portal application in IBM SPSS Collaboration and Deployment Services 4.2.1 before 4.2.1.3 IF3 and 5.0 before FP3 allows remote attackers to read arbitrary files via an XML external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue.

Microsoft Office 2003 SP3 and 2007 SP3, Word 2003 SP3 and 2007 SP3, and Word Viewer allow remote attackers to read arbitrary files via an XML document containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue, aka "XML External Entities Resolution Vulnerability."

IBM OPENBMC OP920, OP930, and OP940 could allow an unauthenticated user to obtain sensitive information. IBM X-Force ID: 212047.

Nextcloud is an open-source, self-hosted productivity platform. The Nextcloud Richdocuments application prior to versions 3.8.6 and 4.2.3 returned verbatim exception messages to the user. This could result in a full path disclosure on shared files. (e.g. an attacker could see that the file `shared.txt` is located within `/files/$username/Myfolder/Mysubfolder/shared.txt`). It is recommended that the Richdocuments application is upgraded to 3.8.6 or 4.2.3. As a workaround, disable the Richdocuments application in the app settings.

A flaw was found in keepass. The vulnerability occurs due to logging the plain text passwords in system log and leads to an Information Exposure vulnerability. This flaw allows an attacker to interact and read sensitive passwords and logs.

devotee 0.1 patch 2 uses a 32-bit seed for generating 48-bit random numbers, which makes it easier for remote attackers to obtain the secret monikers via a brute force attack.

The qcms_transform_data_rgb_out_lut_sse2 function in the QCMS implementation in Mozilla Firefox 4.x through 13.0, Thunderbird 5.0 through 13.0, and SeaMonkey before 2.11 might allow remote attackers to obtain sensitive information from process memory via a crafted color profile that triggers an out-of-bounds read operation.

An exploitable information disclosure vulnerability exists in the KCodes NetUSB.ko kernel module that enables the ReadySHARE Printer functionality of at least two NETGEAR Nighthawk Routers and potentially several other vendors/products. An unauthenticated, remote attacker can craft and send a packet containing an opcode that will trigger the kernel module to return several addresses. One of which can be used to calculate the dynamic base address of the module for further exploitation.

MyBB (aka MyBulletinBoard) before 1.6.7 allows remote attackers to obtain sensitive information via a malformed forumread cookie, which reveals the installation path in an error message.

IBM API Connect 2018.1 through 2018.4.1.6 may inadvertently leak sensitive details about internal servers and network via API swagger. IBM X-force ID: 162947.

eosfailoverservice.exe in C3-ilex EOScada before 11.0.19.2 allows remote attackers to obtain sensitive cleartext information via a session on TCP port 12000.

PhpMyAdmin 5.1.1 and before allows an attacker to retrieve potentially sensitive information by creating invalid requests. This affects the lang parameter, the pma_parameter, and the cookie section.

Nextcloud Richdocuments is an open source collaborative office suite. In affected versions there is a lack of rate limiting on the Richdocuments OCS endpoint. This may have allowed an attacker to enumerate potentially valid share tokens. It is recommended that the Nextcloud Richdocuments app is upgraded to either 3.8.4 or 4.2.1 to resolve. For users unable to upgrade it is recommended that the Richdocuments application be disabled.

phpAdsNew and phpPgAds 2.0.6 and possibly earlier versions allows remote attackers to obtain the application installation path and other sensitive information via direct requests to (1) create.php, and if display_errors is enabled, (2) lib-updates.inc.php, (3) lib-targetstats.inc.php, (4) lib-size.inc.php, (5) lib-misc-stats.inc.php, (6) lib-hourly-hosts.inc.php, (7) lib-hourly.inc.php, (8) lib-history.inc.php, and (9) graph-daily.php.

The Multi-Authentication feature in the Central Authentication Service (CAS) functionality in auth/cas/cas_form.html in Moodle 2.1.x before 2.1.6 and 2.2.x before 2.2.3 does not use HTTPS, which allows remote attackers to obtain credentials by sniffing the network.

IBM Security Directory Server 6.4.0 stores sensitive information in URLs. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referer header or browser history. IBM X-Force ID: 166623.