gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing '\0' character.

Heap buffer overflow in Freetype in Google Chrome prior to 86.0.4240.111 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

Apache HTTP server 2.4.32 to 2.4.44 mod_proxy_uwsgi info disclosure and possible RCE

regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.

An array overflow was discovered in mt76_add_fragment in drivers/net/wireless/mediatek/mt76/dma.c in the Linux kernel before 5.5.10, aka CID-b102f0c522cf. An oversized packet with too many rx fragments can corrupt memory of adjacent pages.

zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).

Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability.

A heap overflow flaw was found in libpngs' pngimage.c program. This flaw allows an attacker with local network access to pass a specially crafted PNG file to the pngimage utility, causing an application to crash, leading to a denial of service.

In drivers/char/virtio_console.c in the Linux kernel before 5.13.4, data corruption or loss can be triggered by an untrusted device that supplies a buf->len value exceeding the buffer size. NOTE: the vendor indicates that the cited data corruption is not a vulnerability in any existing use case; the length validation was added solely for robustness in the face of anomalous host OS behavior

st21nfca_connectivity_event_received in drivers/nfc/st21nfca/se.c in the Linux kernel through 5.16.12 has EVT_TRANSACTION buffer overflows because of untrusted length parameters.

In order to decrypt SM2 encrypted data an application is expected to call the API function EVP_PKEY_decrypt(). Typically an application will call this function twice. The first time, on entry, the "out" parameter can be NULL and, on exit, the "outlen" parameter is populated with the buffer size required to hold the decrypted plaintext. The application can then allocate a sufficiently sized buffer and call EVP_PKEY_decrypt() again, but this time passing a non-NULL value for the "out" parameter. A bug in the implementation of the SM2 decryption code means that the calculation of the buffer size required to hold the plaintext returned by the first call to EVP_PKEY_decrypt() can be smaller than the actual size required by the second call. This can lead to a buffer overflow when EVP_PKEY_decrypt() is called by the application a second time with a buffer that is too small. A malicious attacker who is able present SM2 content for decryption to an application could cause attacker chosen data to overflow the buffer by up to a maximum of 62 bytes altering the contents of other data held after the buffer, possibly changing application behaviour or causing the application to crash. The location of the buffer is application dependent but is typically heap allocated. Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k).

An issue was discovered in the Linux kernel through 5.11.8. The sound/soc/qcom/sdm845.c soundwire device driver has a buffer overflow when an unexpected port ID number is encountered, aka CID-1c668e1c0a0f. (This has been fixed in 5.12-rc4.)

lmp_print_data_link_subobjs() in print-lmp.c in tcpdump before 4.9.3 lacks certain bounds checks.

A buffer overflow flaw was found, in versions from 2.6.34 to 5.2.x, in the way Linux kernel's vhost functionality that translates virtqueue buffers to IOVs, logged the buffer descriptors during migration. A privileged guest user able to pass descriptors with invalid length to the host when migration is underway, could use this flaw to increase their privileges on the host.

BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting valid values for the tkey-gssapi-keytab or tkey-gssapi-credentialconfiguration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. The most likely outcome of a successful exploitation of the vulnerability is a crash of the named process. However, remote code execution, while unproven, is theoretically possible. Affects: BIND 9.5.0 -> 9.11.27, 9.12.0 -> 9.16.11, and versions BIND 9.11.3-S1 -> 9.11.27-S1 and 9.16.8-S1 -> 9.16.11-S1 of BIND Supported Preview Edition. Also release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 2 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion caused by a malformed TCP AO option.

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the IPv4 component. There is an IPNET security vulnerability: Stack overflow in the parsing of IPv4 packets’ IP options.

Wind River VxWorks has a Buffer Overflow in the TCP component (issue 1 of 4). This is a IPNET security vulnerability: TCP Urgent Pointer = 0 that leads to an integer underflow.

Wind River VxWorks 6.6 through 6.9 has a Buffer Overflow in the DHCP client component. There is an IPNET security vulnerability: Heap overflow in DHCP Offer/ACK parsing inside ipdhcpc.

Wind River VxWorks 6.7 though 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 3 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion during connect() to a remote host.

The BPF subsystem in the Linux kernel before 4.17 mishandles situations with a long jump over an instruction sequence where inner instructions require substantial expansions into multiple BPF instructions, leading to an overflow. This affects kernel/bpf/core.c and net/core/filter.c.

A vulnerability was found in Tenda F451 1.0.0.7_cn_svn7958. This issue affects the function fromGstDhcpSetSer of the file /goform/GstDhcpSetSer of the component httpd. Performing a manipulation of the argument dips results in buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used.

A flaw has been found in Tenda F456 1.0.0.5. Affected by this vulnerability is the function formWrlExtraSet of the file /goform/WrlExtraSet of the component httpd. Executing a manipulation of the argument Go can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

A security vulnerability has been detected in H3C Magic B0 up to 100R002. This vulnerability affects the function Edit_BasicSSID of the file /goform/aspForm. Such manipulation of the argument param leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Tenda F456 1.0.0.5. The affected element is an unknown function of the file /goform/setcfm of the component httpd. This manipulation of the argument funcname/funcpara1 causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A vulnerability was detected in code-projects for Plugin 4.1.2cu.5137. The impacted element is the function setWiFiMultipleConfig in the library /lib/cste_modules/wireless.so of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument wepkey2 results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A vulnerability was identified in UTT HiPER 1250GW up to 3.2.7-210907-180535. This issue affects the function strcpy of the file route/goform/formTaskEdit_ap. The manipulation of the argument Profile leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A vulnerability has been found in H3C Magic B1 up to 100R004. The affected element is the function SetAPWifiorLedInfoById of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Tenda F456 1.0.0.5. Impacted is the function fromDhcpListClient of the file /goform/DhcpListClient of the component httpd. Such manipulation of the argument page leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in Totolink N300RH 3.2.4-B20220812. This affects the function setWanConfig of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument priDns leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in TRENDnet TEW-821DAP 1.12B01. Impacted is the function auto_update_firmware of the component Firmware Udpate. The manipulation of the argument str leads to buffer overflow. The attack may be initiated remotely. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in Tenda F456 1.0.0.5. The impacted element is the function fromP2pListFilter of the file /goform/P2pListFilter. The manipulation of the argument menufacturer/Go leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability was determined in UTT HiPER 1250GW up to 3.2.7-210907-180535. This vulnerability affects the function strcpy of the file route/goform/NTP. Executing a manipulation of the argument Profile can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in Shenzhen Libituo Technology LBT-T300-HW1 up to 1.2.8. This issue affects the function start_single_service of the component Web Management Interface. Executing a manipulation of the argument vpn_pptp_server/vpn_l2tp_server can lead to buffer overflow. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Tenda F456 1.0.0.5. This issue affects the function fromVirtualSer of the file /goform/VirtualSer of the component httpd. The manipulation of the argument menufacturer/Go leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

A vulnerability has been found in D-Link DIR-825M 1.1.12. This vulnerability affects the function sub_4151FC of the file /boafrm/formVpnConfigSetup. The manipulation of the argument submit-url leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Tenda F456 1.0.0.5. This affects the function frmL7ProtForm of the file /goform/L7Prot of the component httpd. Performing a manipulation of the argument page results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in Totolink N300RH 3.2.4-B20220812. Affected by this issue is the function setUpgradeFW of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Executing a manipulation of the argument FileName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability was detected in Tenda F456 1.0.0.5. This impacts the function fromSafeMacFilter of the file /goform/SafeMacFilter. The manipulation of the argument page results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used.

A weakness has been identified in Tenda F456 1.0.0.5. This vulnerability affects the function fromPptpUserAdd of the file /goform/PPTPDClient of the component httpd. Executing a manipulation of the argument opttype/usernamewith can lead to buffer overflow. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in Tenda F456 1.0.0.5. Impacted is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter of the component httpd. The manipulation of the argument page results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used.

A vulnerability has been found in Tenda F456 1.0.0.5. This affects the function fromWrlclientSet of the file /goform/WrlclientSet of the component httpd. The manipulation leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.