The web-based file-restore interface in EMC Avamar Server before 6.1.0 allows remote authenticated users to read arbitrary files via a crafted URL.

Lockbox in EMC Documentum D2 before 4.5 uses a hardcoded passphrase when a server lacks a D2.Lockbox file, which makes it easier for remote authenticated users to decrypt admin tickets by locating this passphrase in a decompiled D2 JAR archive.

EMC Documentum Content Server before 7.0 P20, 7.1 before P18, and 7.2 before P02, when RPC tracing is configured, stores certain obfuscated password data in a log file, which allows remote authenticated users to obtain sensitive information by reading this file.

The NetWorker Management Console (NMC) in EMC NetWorker 8.0.x before 8.0.2.3, when using Active Directory/LDAP for authentication, allows remote authenticated users to discover cleartext administrator passwords via (1) unspecified NMC audit reports or (2) requests to RAP resources.

The service utility in EMC Avamar 5.x before 5.0.4 uses cleartext to transmit event details in (1) service requests and (2) e-mail messages, which might allow remote attackers to obtain sensitive information by sniffing the network.

Directory traversal vulnerability in EMC Document Sciences xPression 4.1 SP1 before Patch 47, 4.2 before Patch 26, and 4.5 before Patch 05, as used in Documentum Edition, Enterprise Edition Publish Engine, and Enterprise Edition Compuset Engine, allows remote authenticated users to read arbitrary files by leveraging xDashboard access.

The default configuration of ExShortcut\Web.config in EMC SourceOne Email Management before 6.6 SP1, when the Mobile Services component is used, does not properly set the localOnly attribute of the trace element, which allows remote authenticated users to obtain sensitive information via ASP.NET Application Tracing.

Dell EMC ViPR Controller, versions after 3.0.0.38, contain an information exposure vulnerability in the VRRP. VRRP defaults to an insecure configuration in Linux's keepalived component which sends the cluster password in plaintext through multicast. A malicious user, having access to the vCloud subnet where ViPR is deployed, could potentially sniff the password and use it to take over the cluster's virtual IP and cause a denial of service on that ViPR Controller system.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is affected by an information exposure through an error message vulnerability. A remote low privileged attacker may potentially exploit this vulnerability to use information disclosed in an error message to launch another more focused attack.

EMC RSA Archer Security Operations Management with RSA Unified Collector Framework versions prior to 1.3.1.52 contain a sensitive information disclosure vulnerability that could potentially be exploited by malicious users to compromise an affected system.

EMC ESRS VE 3.18 or earlier contains Authentication Bypass that could potentially be exploited by malicious users to compromise the affected system.

EMC NetWorker 7.6.x and 8.x before 8.1 allows local users to obtain sensitive configuration information by leveraging operating-system privileges to perform decryption with nsradmin.

EMC RecoverPoint versions prior to 5.0 and EMC RecoverPoint for Virtual Machines versions prior to 5.0 have an SSL Stripping Vulnerability that may potentially be exploited by malicious users to compromise the affected system.

EMC Documentum D2 4.5 before patch 15 and 4.6 before patch 03 allows remote attackers to read arbitrary Docbase documents by leveraging knowledge of an r_object_id value.

Dell EMC RecoverPoint versions prior to 5.1.2.1 and RecoverPoint for VMs versions prior to 5.2.0.2 contain an information disclosure vulnerability. A malicious boxmgmt user may potentially be able to determine the existence of any system file via Boxmgmt CLI.

Avamar Data Store (ADS) and Avamar Virtual Edition (AVE) in EMC Avamar Server before 7.3.0-233 use the same encryption key across different customers' installations, which allows remote attackers to defeat cryptographic protection mechanisms and obtain sensitive client-server traffic information by leveraging knowledge of this key from another installation.

EMC RSA Identity Management and Governance before 6.8.1 P25 and 6.9.x before 6.9.1 P15 and RSA Via Lifecycle and Governance before 7.0.0 P04 allow remote authenticated users to obtain User Detail Popup information via a modified URL.

Avamar Data Store (ADS) and Avamar Virtual Edition (AVE) in EMC Avamar Server before 7.3.0-233 rely on client-side authentication, which allows remote attackers to spoof clients and read backup data via a modified client agent.

EMC Documentum xCP 2.1 before patch 24 and 2.2 before patch 12 allows remote authenticated users to obtain sensitive user-account metadata via a members/xcp_member API call.

EMC RSA Data Loss Prevention 9.6 before SP2 P5 allows remote authenticated users to obtain sensitive information by reading error messages.

Reviewer in EMC SourceOne Email Supervisor before 7.2 does not properly limit attempts to authenticate, which makes it easier for remote attackers to obtain access via a brute-force approach.

The default configuration of EMC VPLEX GeoSynchrony 5.4 SP1 before P3 stores cleartext NAVISPHERE GUI passwords in a log file, which allows local users to obtain sensitive information by reading this file.

Directory traversal vulnerability in the API in EMC Secure Remote Services Virtual Edition 3.x before 3.10 allows remote authenticated users to read log files via a crafted parameter.

The SAN Manager Master Agent service (aka msragent.exe) in EMC Control Center before 6.1 does not properly authenticate SST_SENDFILE requests, which allows remote attackers to read arbitrary files.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is affected by an authorization bypass through user-controlled key vulnerability in Discussion Forum Messages. A remote low privileged attacker may potentially exploit this vulnerability to elevate their privileges and view other users' discussion forum messages.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is affected by an information exposure through an error message vulnerability. A remote low privileged attacker may potentially exploit this vulnerability to use information disclosed in an error message to launch another more focused attack.

Directory traversal vulnerability in EMC Avamar Server 7.x before 7.1.2 and Avamar Virtual Addition (AVE) 7.x before 7.1.2 allows remote attackers to read arbitrary files by using the Avamar Desktop/Laptop client interface to send crafted parameters.

EMC Documentum xCelerated Management System (xMS) 1.1 before P14 stores cleartext Windows Service credentials in a batch file during Documentum Platform and xCelerated Composition Platform (xCP) provisioning, which allows local users to obtain sensitive information by reading a file.

EMC M&R (aka Watch4Net) before 6.5u1 and ViPR SRM before 3.6.1 might allow remote attackers to obtain cleartext data-center discovery credentials by leveraging certain SRM access to conduct a decryption attack.

The InputAccel Database (IADB) installation process in EMC Captiva Capture 7.0 before patch 25 and 7.1 before patch 13 places a cleartext InputAccel (IA) SQL password in a DAL log file, which allows local users to obtain sensitive information by reading a file.

The D2-API component in EMC Documentum D2 3.1 through SP1, 4.0 and 4.1 before 4.1 P22, and 4.2 before P11 places the MD5 hash of an encryption passphrase in log files, which allows remote authenticated users to obtain sensitive information by reading a file.

The EMC NetWorker Module for MEDITECH (aka NMMEDI) 3.0 build 87 through 90, when EMC RecoverPoint and Plink are used, stores cleartext RecoverPoint Appliance credentials in nsrmedisv.raw log files, which allows local users to obtain sensitive information by reading these files.

The JAXB XML parser in EMC Documentum Foundation Services (DFS) 6.6 before P39, 6.7 SP1 before P28, and 6.7 SP2 before P15, as used in My Documentum for Desktop, My Documentum for Microsoft Outlook, and CenterStage, allows remote authenticated users to read arbitrary files via an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue.

EMC Documentum Content Server before 6.7 SP2 P16 and 7.x before 7.1 P07 allows remote authenticated users to read sensitive object metadata via an RPC command.

EMC Documentum Web Development Kit (WDK) before 6.8 allows remote attackers to conduct frame-injection attacks and obtain sensitive information via unspecified vectors.

The default configuration of EMC RecoverPoint Appliance (RPA) 4.1 before 4.1.0.1 does not enable a firewall, which allows remote attackers to obtain potentially sensitive information about open ports, or cause a denial of service, by sending packets to many ports.

EMC Cloud Tiering Appliance (CTA) 10 through SP1 allows remote attackers to read arbitrary files via an api/login request containing an XML external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue, as demonstrated by reading the /etc/shadow file.

EMC PowerPath Virtual (Management) Appliance 2.0, EMC PowerPath Virtual (Management) Appliance 2.0 SP1 is affected by a sensitive information disclosure vulnerability that may potentially be exploited by malicious users to compromise the affected system.

EMC RSA Archer GRC 5.x before 5.5.3 uses cleartext for stored passwords in unspecified circumstances, which allows remote authenticated users to obtain sensitive information by reading database fields.

In the Federation component of OpenStack Keystone before 11.0.4, 12.0.0, and 13.0.0, an authenticated "GET /v3/OS-FEDERATION/projects" request may bypass intended access restrictions on listing projects. An authenticated user may discover projects they have no authority to access, leaking all projects in the deployment and their attributes. Only Keystone with the /v3/OS-FEDERATION endpoint enabled via policy.json is affected.

All versions of Samba prior to 4.15.5 are vulnerable to a malicious client using a server symlink to determine if a file or directory exists in an area of the server file system not exported under the share definition. SMB1 with unix extensions has to be enabled in order for this attack to succeed.

Discourse is an open source discussion platform. In affected versions a vulnerability affects users of tag groups who use the "Tags are visible only to the following groups" feature. A tag group may only allow a certain group (e.g. staff) to view certain tags. Users who were tracking or watching the tags via /preferences/tags, then have their staff status revoked will still see notifications related to the tag, but will not see the tag on each topic. This issue has been patched in stable version 2.7.11. Users are advised to upgrade as soon as possible.

IBM SAN Volume Controller, IBM Storwize, IBM Spectrum Virtualize and IBM FlashSystem products ( 6.1, 6.2, 6.3, 6.4, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 7.6.1, 7.7, 7.7.1, 7.8, 7.8.1, 8.1, and 8.1.1) could allow an authenticated user to obtain the private key which could make intercepting GUI communications possible. IBM X-Force ID: 140396.

IBM Financial Transaction Manager 3.0.4 and 3.1.0 for ACH Services for Multi-Platform could allow an authenticated user to execute a specially crafted command that could obtain sensitive information. IBM X-Force ID: 138377.

An issue was discovered in PrimeKey EJBCA before 7.6.0. As part of the configuration of the aliases for SCEP, CMP, EST, and Auto-enrollment, the enrollment secret was reflected on a page (that can only be viewed by an administrator). While hidden from direct view, checking the page source would reveal the secret.

In Octopus Deploy version 2018.5.1 to 2018.5.7, a user with Task View is able to view a password for a Service Fabric Cluster, when the Service Fabric Cluster target is configured in Azure Active Directory security mode and a deployment is executed with OctopusPrintVariables set to True. This is fixed in 2018.6.0.

In the WordPress plugin, Fast Velocity Minify before 2.7.7, the full web root path to the running WordPress application can be discovered. In order to exploit this vulnerability, FVM Debug Mode needs to be enabled and an admin-ajax request needs to call the fastvelocity_min_files action.

frontcontroller.jsp in IBM Maximo Asset Management 7.x before 7.5.0.6 and SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2 allows remote authenticated users to obtain sensitive information via an invalid action_code.

NetApp OnCommand Unified Manager for 7-Mode (core package) versions prior to 5.2.3 may disclose sensitive LDAP account information to authenticated users when the LDAP authentication configuration is tested via the user interface.

HP SQL/MX 3.2 and earlier on NonStop servers, when SQL/MP Objects are used, allows remote authenticated users to obtain sensitive information via unspecified vectors, aka the "SQL/MP index" issue.