The NETGEAR WNR2000v5 router contains a buffer overflow which can be exploited to achieve remote code execution.
Apply updates per vendor instructions.
Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, PR2000 before 1.0.0.30, R6020 before 1.0.0.42, R6050 before 1.0.1.22, JR6150 before 1.0.1.22, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R69002 before 1.2.0.62, and WNR2020 before 1.1.0.62.
This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System 1.6.0.26. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MFileUploadController class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-12124.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pin_wps function.
NETGEAR RAX5 (AX1600 WiFi Router) v1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_enable function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the devname parameter in the reset_wifi function.
Certain D-Link, Edimax, NETGEAR, TP-Link, Tenda, and Western Digital devices are affected by an integer overflow by an unauthenticated attacker. Remote code execution from the WAN interface (TCP port 20005) cannot be ruled out; however, exploitability was judged to be of "rather significant complexity" but not "impossible." The overflow is in SoftwareBus_dispatchNormalEPMsgOut in the KCodes NetUSB kernel module. Affected NETGEAR devices are D7800 before 1.0.1.68, R6400v2 before 1.0.4.122, and R6700v3 before 1.0.4.122.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6260 before 1.1.0.76, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, and AC2600 before 1.2.0.62.
NETGEAR Nighthawk WiFi Mesh systems and routers are affected by a stack-based buffer overflow vulnerability. This affects MR60 before 1.1.7.132, MS60 before 1.1.7.132, R6900P before 1.3.3.154, R7000P before 1.3.3.154, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.
Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameters apmode_dns1_pri and apmode_dns1_sec.
Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter wan_dns1_pri.
In Netgear WNR854T 1.5.2 (North America), the UPNP service (/usr/sbin/upnp) is vulnerable to stack-based buffer overflow in the M-SEARCH Host header.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.74, D8500 before 1.0.3.60, DC112A before 1.0.0.56, R6300v2 before 1.0.4.50, R6400 before 1.0.1.68, R7000 before 1.0.11.116, R7100LG before 1.0.0.70, RBS40V before 2.6.2.8, RBW30 before 2.6.2.2, RS400 before 1.5.1.80, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.
Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution.
Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface.
In Netgear WNR854T 1.5.2 (North America), the UPNP service is vulnerable to command injection in the function addmap_exec which parses the NewInternalClient parameter of the AddPortMapping SOAPAction into a system call without sanitation. An attacker can send a specially crafted SOAPAction request for AddPortMapping via the router's WANIPConn1 service to achieve arbitrary command execution.
Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter wan_hostname and forcing a reboot. This will result in command injection.
Netgear WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the SetDefaultConnectionService function due to an unconstrained use of sscanf. The vulnerability allows for control of the program counter and can be utilized to achieve arbitrary code execution.
Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter pppoe_peer_mac and forcing a reboot. This will result in command injection.
handle_daylightsaving.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.0.0 through 3.0.0, NUUO Crystal 2.2.1 through 3.2.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the NTPServer parameter.
__debugging_center_utils___.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.7.5 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the log parameter.
NETGEAR R7800 devices before 1.0.2.68 are affected by remote code execution by unauthenticated attackers.
Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameters: starthour, startminute , endhour, and endminute.
Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via wan_dns1_pri.
Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameters KEY1 and KEY2.
Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter wan_dns1_sec.
Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter enable_band_steering.
Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.
(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.
Netgear R7000P V1.3.0.8, V1.3.1.64 is vulnerable to Buffer Overflow via parameters: stamode_dns1_pri and stamode_dns1_sec.
Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameter openvpn_push1.
Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter enable_band_steering.
NETGEAR JNR1010 devices before 1.0.0.32 have Incorrect Access Control because the ok value of the auth cookie is a special case.
NETGEAR Arlo base stations with firmware 1.7.5_6178 and earlier, Arlo Q devices with firmware 1.8.0_5551 and earlier, and Arlo Q Plus devices with firmware 1.8.1_6094 and earlier have a default password of 12345678, which makes it easier for remote attackers to obtain access after a factory reset or in a factory configuration.
NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an unauthenticated attacker.
Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.26, JR6150 before 1.0.1.26, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.66, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, AC2600 before 1.2.0.62, R7450 before 1.2.0.62, and WNR2020 before 1.1.0.62.
Symlink Traversal vulnerability in NETGEAR WNR3500U and WNR3500L due to misconfiguration in the SMB service.
Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.
NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.
Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".
An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.
Netgear Nighthawk AC1900 Smart WiFi Dual Band Gigabit Router R7000-V1.0.11.134_10.2.119 is vulnerable to Buffer Overflow via the wl binary in firmware. There is a stack overflow vulnerability caused by strncat
Netgear N300 wireless router wnr2000v4-V1.0.0.70 is vulnerable to Buffer Overflow via uhttpd. There is a stack overflow vulnerability caused by strcpy.
Netgear N300 wireless router wnr2000v4-V1.0.0.70 was discovered to contain a stack overflow via strcpy in uhttpd.
In Netgear RAX30 V1.0.10.94, a PHP-FPM misconfiguration vulnerability is caused by not following the specification to only limit FPM to .php extensions. An attacker may exploit this by uploading malicious scripts disguised with alternate extensions and tricking the web server into executing them as PHP, bypassing security mechanisms based on file extension filtering. This may lead to remote code execution (RCE), information disclosure, or full system compromise.
Netgear EX8000 V1.0.0.126 is vulnerable to Command Injection via the Iface parameter in the action_wireless function.
A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been declared as critical. Affected by this vulnerability is the function cmd_wireless. The manipulation of the argument host leads to command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.