Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.45), 8.0 before 8.0(4.44), 8.1 before 8.1(2.35), and 8.2 before 8.2(1.10), allows remote attackers to cause a denial of service (page fault and device reload) via a malformed DTLS message, aka Bug ID CSCtb64913 and "WebVPN DTLS Denial of Service Vulnerability."

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.46), 8.0 before 8.0(4.38), 8.1 before 8.1(2.29), and 8.2 before 8.2(1.5); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (prevention of new connections) via crafted TCP segments during termination of the TCP connection that cause the connection to remain in CLOSEWAIT status, aka "TCP Connection Exhaustion Denial of Service Vulnerability."

The CTI Manager service in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 4.x before 4.3(2)sr1a, 6.x before 6.1(3), 7.0x before 7.0(2), 7.1x before 7.1(2), and 8.x before 8.0(1) allows remote attackers to cause a denial of service (service failure) via a malformed message, aka Bug ID CSCsu31800.

The Cisco Firewall Services Module (FWSM) 4.0 before 4.0(8), as used in for the Cisco Catalyst 6500 switches, Cisco 7600 routers, and ASA 5500 Adaptive Security Appliances, allows remote attackers to cause a denial of service (crash) via a malformed Skinny Client Control Protocol (SCCP) message.

Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 4.x before 4.3(2)SR2, 6.x before 6.1(5), 7.x before 7.1(3a)su1, and 8.x before 8.0(1) allows remote attackers to cause a denial of service (process failure) via a malformed SCCP StationCapabilitiesRes message with an invalid MaxCap field, aka Bug ID CSCtc38985.

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.2), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.16); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCsy91157.

Unspecified vulnerability in Cisco Wireless LAN Controller (WLC) software 3.2 before 3.2.215.0; 4.1 and 4.2 before 4.2.205.0; 4.1M and 4.2M before 4.2.207.54M; 5.0, 5.1, and 6.0 before 6.0.188.0; and 5.2 before 5.2.193.11 allows remote attackers to cause a denial of service (device reload) via a crafted IKE packet, aka Bug ID CSCta56653.

Cisco IOS 12.1 through 12.4, and 15.0M before 15.0(1)M1, allows remote attackers to cause a denial of service (interface queue wedge) via malformed H.323 packets, aka Bug ID CSCta19962.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to cause a denial of service (device crash) via vectors involving SSL VPN and PPPoE transactions, aka Bug ID CSCsm77958.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (traceback) via malformed TCP packets, aka Bug ID CSCsm84110.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (IKE process hang) via malformed NAT-T packets, aka Bug ID CSCsr74439.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of email messages that contain large attachments. An attacker could exploit this vulnerability by sending a malicious email message through the targeted device. A successful exploit could allow the attacker to cause a permanent DoS condition due to high CPU utilization. This vulnerability may require manual intervention to recover the ESA.

A vulnerability in the DHCPv6 input packet processor of Cisco Prime Network Registrar could allow an unauthenticated, remote attacker to restart the server and cause a denial of service (DoS) condition on the affected system. The vulnerability is due to incomplete user-supplied input validation when a custom extension attempts to change a DHCPv6 packet received by the application. An attacker could exploit this vulnerability by sending malformed DHCPv6 packets to the application. An exploit could allow the attacker to trigger a restart of the service which, if exploited repeatedly, might lead to a DoS condition. This vulnerability can only be exploited if the administrator of the server has previously installed custom extensions that attempt to modify the packet details before the packet has been processed. Note: Although the CVSS score matches a High SIR, this has been lowered to Medium because this condition will only affect an application that has customer-developed extensions that will attempt to modify packet parameters before the packet has been completely sanitized. If packet modification in a custom extension happens after the packet has been sanitized, the application will not be affected by this vulnerability. Software versions prior to 8.3(7) and 9.1(2) are affected.

Unspecified vulnerability in Cisco IOS 12.2XNA, 12.2XNB, 12.2XNC, 12.2XND, 12.4T, 12.4XZ, and 12.4YA, when Zone-Based Policy Firewall SIP Inspection is enabled, allows remote attackers to cause a denial of service (device reload) via a crafted SIP transit packet, aka Bug ID CSCsr18691.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition.

Cisco Sourcefire Snort 3.0 before build 233 has a Buffer Overread related to use of a decoder array. The size was off by one making it possible to read past the end of the array with an ether type of 0xFFFF. Increasing the array size solves this problem.

A vulnerability in the packet processing functionality of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted H.323 traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to either reboot normally or reboot into maintenance mode, which could result in a DoS condition on the device.

A vulnerability in the AppNav-XE feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of certain TCP segments. An attacker could exploit this vulnerability by sending a stream of crafted TCP traffic at a high rate through an interface of an affected device. That interface would need to have AppNav interception enabled. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the remote access SSL VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of errors that are logged as a result of client connections that are made using remote access VPN. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.

Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in the TIFF file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to inadequate input validation of incoming CAPWAP packets encapsulating multicast DNS (mDNS) queries. An attacker could exploit this vulnerability by connecting to a wireless network and sending a crafted mDNS query, which would flow through and be processed by the wireless controller. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in CHM file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the Snort rule evaluation function of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of the DNS reputation enforcement rule. An attacker could exploit this vulnerability by sending crafted UDP packets through an affected device to force a buildup of UDP connections. A successful exploit could allow the attacker to cause traffic that is going through the affected device to be dropped, resulting in a DoS condition. Note: This vulnerability only affects Cisco FTD devices that are running Snort 3.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in HTML file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the Application Visibility and Control (AVC-FNF) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient packet verification for traffic inspected by the AVC feature. An attacker could exploit this vulnerability by sending crafted packets from the wired network to a wireless client, resulting in the crafted packets being processed by the wireless controller. A successful exploit could allow the attacker to cause a crash and reload of the affected device, resulting in a DoS condition.

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.

A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in IP ingress packet processing of the Cisco Embedded Wireless Controller with Catalyst Access Points Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device may experience a performance degradation in traffic processing or high CPU usage prior to the unexpected reload. This vulnerability is due to improper rate limiting of IP packets to the management interface. An attacker could exploit this vulnerability by sending a steady stream of IP traffic at a high rate to the management interface of the affected device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers and Cisco AireOS Software for Cisco Wireless LAN Controllers (WLC) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of certain parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by spoofing the address of an existing Access Point on the network and sending a Control and Provisioning of Wireless Access Points (CAPWAP) packet that includes a crafted Flexible NetFlow Version 9 record to an affected device. A successful exploit could allow the attacker to cause a process crash that would lead to a reload of the device.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature for Cisco Small Business RV VPN Routers could allow an unauthenticated, remote attacker to cause the device to unexpectedly restart, causing a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to the targeted device. A successful exploit could allow the attacker to cause a reload, resulting in a DoS condition.

A vulnerability in the TCP packet processing functionality of Cisco IP Phones could allow an unauthenticated, remote attacker to cause the phone to stop responding to incoming calls, drop connected calls, or unexpectedly reload. The vulnerability is due to insufficient TCP ingress packet rate limiting. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the targeted device. A successful exploit could allow the attacker to impact operations of the phone or cause the phone to reload, leading to a denial of service (DoS) condition.

Cisco Wireless LAN Controller (WLC) devices 7.2 before 7.2.115.2, 7.3, and 7.4 before 7.4.110.0 allow remote attackers to cause a denial of service (device restart) via a crafted 802.11 Ethernet frame, aka Bug ID CSCue87929.

A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243.

A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.

A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803.

A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795.

Cisco Wireless LAN Controller (WLC) devices 7.2, 7.3, and 7.4 before 7.4.110.0 allow remote attackers to cause a denial of service (device restart) via a crafted 802.11 Ethernet frame, aka Bug ID CSCuf80681.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.

A vulnerability in the ICMP ingress packet processing of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause the TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation for the size of a received ICMP packet. An attacker could exploit this vulnerability by sending a crafted ICMP packet to the local IP address of the targeted endpoint. A successful exploit could allow the attacker to cause a DoS of the TelePresence endpoint, during which time calls could be dropped. This vulnerability would affect either IPv4 or IPv6 ICMP traffic. This vulnerability affects the following Cisco TelePresence products when running software release CE8.1.1, CE8.2.0, CE8.2.1, CE8.2.2, CE 8.3.0, or CE8.3.1: Spark Room OS, TelePresence DX Series, TelePresence MX Series, TelePresence SX Quick Set Series, TelePresence SX Series. Cisco Bug IDs: CSCvb95396.

Cisco Wireless LAN Controller (WLC) devices 7.0 before 7.0.250.0, 7.2, 7.3, and 7.4 before 7.4.110.0 do not properly deallocate memory, which allows remote attackers to cause a denial of service (reboot) by sending WebAuth login requests at a high rate, aka Bug ID CSCuf52361.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727.

A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455.

A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320.

A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198.

A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385.

A vulnerability in the received packet parser of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) software could allow an unauthenticated, remote attacker to cause a reload of the affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient size validation of user-supplied data. An attacker could exploit this vulnerability by sending crafted H.224 data in Real-Time Transport Protocol (RTP) packets in an H.323 call. An exploit could allow the attacker to overflow a buffer in a cache that belongs to the received packet parser, which will result in a crash of the application, resulting in a DoS condition. All versions of Cisco Expressway Series Software and Cisco TelePresence VCS Software prior to version X8.8.2 are vulnerable. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCus99263.

A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441.