The Adaptive Security Appliance (ASA) 5585-X FirePOWER Security Services Processor (SSP) module for Cisco ASA with FirePOWER Services 5.3.1 through 6.0.0 misconfigures kernel logging, which allows remote attackers to cause a denial of service (resource consumption, and inspection outage or module outage) via a flood of crafted IP traffic, aka Bug ID CSCux19922.
The TCP implementation in Cisco Videoscape Distribution Suite for Internet Streaming (VDS-IS) 3.3(0), 3.3(1), 4.0(0), and 4.1(0) does not properly initiate new TCP sessions when a previous session is in a FIN wait state, which allows remote attackers to cause a denial of service (TCP outage) via vectors involving FIN packets, aka Bug ID CSCuy45136.
A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter that contains certain rules. More Information: CSCux59873. Known Affected Releases: 8.5.6-106 9.1.0-032 9.7.0-125. Known Fixed Releases: 9.1.1-038 9.7.1-066.
Cisco IOS XR 5.x through 5.2.5 on NCS 6000 devices allows remote attackers to cause a denial of service (timer consumption and Route Processor reload) via crafted SSH traffic, aka Bug ID CSCux76819.
A vulnerability in the email attachment scanning functionality of the Advanced Malware Protection (AMP) feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop scanning and forwarding email messages due to a denial of service (DoS) condition. Affected Products: This vulnerability affects Cisco AsyncOS Software releases 9.7.1 and later, prior to the first fixed release, for both virtual and hardware Cisco Email Security Appliances, if the AMP feature is configured to scan incoming email attachments. More Information: CSCuy99453. Known Affected Releases: 9.7.1-066. Known Fixed Releases: 10.0.0-125 9.7.1-207 9.7.2-047.
Cisco IOS 15.0 through 15.5 and IOS XE 3.3 through 3.16 allow remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 Relay message, aka Bug ID CSCus55821.
The packet-processing microcode in Cisco IOS 15.2(2)EA, 15.2(2)EA1, 15.2(2)EA2, and 15.2(4)EA on Industrial Ethernet 4000 devices and 15.2(2)EB and 15.2(2)EB1 on Industrial Ethernet 5000 devices allows remote attackers to cause a denial of service (packet data corruption) via crafted IPv4 ICMP packets, aka Bug ID CSCuy13431.
The web GUI on Cisco Small Business 500 devices 1.2.0.92 allows remote attackers to cause a denial of service via a crafted HTTP request, aka Bug ID CSCul65330.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS XE 2.1 through 3.17S, IOS XR 2.0.0 through 5.3.2, and NX-OS allows remote attackers to cause a denial of service (packet-processing outage) via crafted ND messages, aka Bug ID CSCuz66542, as exploited in the wild in May 2016.
Cisco TelePresence Video Communications Server (VCS) X8.x before X8.7.2 allows remote attackers to cause a denial of service (service disruption) via a crafted URI in a SIP header, aka Bug ID CSCuy43258.
The Smart Install client implementation in Cisco IOS 12.2, 15.0, and 15.2 and IOS XE 3.2 through 3.7 allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in a Smart Install packet, aka Bug ID CSCuv45410.
Cisco AireOS 4.1 through 7.4.120.0, 7.5.x, and 7.6.100.0 on Wireless LAN Controller (WLC) devices allows remote attackers to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCun86747.
The web-based management interface on Cisco Small Business 220 devices with firmware before 1.0.1.1 allows remote attackers to cause a denial of service (interface outage) via a crafted HTTP request, aka Bug ID CSCuz76238.
goform/WClientMACList on Cisco EPC3928 devices allows remote attackers to cause a denial of service (device crash) via a long h_sortWireless parameter, related to a "Gateway Client List Denial of Service" issue, aka Bug ID CSCux24948.
A vulnerability in the Rate Limiting Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization in the Cisco QuantumFlow Processor of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to mishandling of the rate limiting feature within the QuantumFlow Processor. An attacker could exploit this vulnerability by sending large amounts of traffic that would be subject to NAT and rate limiting through an affected device. A successful exploit could allow the attacker to cause the QuantumFlow Processor utilization to reach 100 percent on the affected device, resulting in a DoS condition.
A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.
A vulnerability in the Multi-Pod or Multi-Site network configurations for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to unexpectedly restart the device, resulting in a denial of service (DoS) condition. This vulnerability exists because TCP traffic sent to a specific port on an affected device is not properly sanitized. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port that is listening on a public-facing IP address for the Multi-Pod or Multi-Site configuration. A successful exploit could allow the attacker to cause the device to restart unexpectedly, resulting in a DoS condition.
A vulnerability in Address Resolution Protocol (ARP) management of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent an affected device from resolving ARP entries for legitimate hosts on the connected subnets. This vulnerability exists because ARP entries are mismanaged. An attacker could exploit this vulnerability by continuously sending traffic that results in incomplete ARP entries. A successful exploit could allow the attacker to cause ARP requests on the device to be unsuccessful for legitimate hosts, resulting in a denial of service (DoS) condition.
Cisco Headend System Release allows remote attackers to cause a denial of service (DHCP and TFTP outage) via a flood of crafted UDP traffic, aka Bug ID CSCus04097.
A vulnerability in the SSH service of the Cisco StarOS operating system could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service from receiving any traffic, which would lead to a DoS condition on the affected device.
A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.
A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
The JTapi Gateway process in Cisco Unified Contact Center Enterprise, Unified Contact Center Hosted, IP Contact Center Enterprise, and Cisco IP Contact Center Hosted 5.0 through 7.1 allows remote attackers to cause a denial of service (repeated process restart) via a certain TCP session on the JTapi server port.
The Data-link Switching (DLSw) feature in Cisco IOS 11.0 through 12.4 allows remote attackers to cause a denial of service (device reload) via "an invalid value in a DLSw message... during the capabilities exchange."
Buffer overflow in Cisco 7xx routers through the telnet service.
A vulnerability in the TCP ingress handler for the data interfaces that are configured with management access to Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an increase in CPU and memory usage, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient ingress TCP rate limiting for TCP ports 22 (SSH) and 443 (HTTPS). An attacker could exploit this vulnerability by sending a crafted, steady stream of TCP traffic to port 22 or 443 on the data interfaces that are configured with management access to the affected device.
Cisco NX-OS 4.1 through 7.3 and 11.0 through 11.2 on Nexus 2000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote attackers to cause a denial of service (device crash) via crafted IPv4 DHCP packets to the (1) DHCPv4 relay agent or (2) smart relay agent, aka Bug IDs CSCuq24603, CSCur93159, CSCus21693, and CSCut76171.
The SIP implementation in Cisco IOS 15.5(3)M on Cisco Unified Border Element (CUBE) devices allows remote attackers to cause a denial of service via crafted SIP messages, aka Bug ID CSCuv79202.
The DHCPv6 server in Cisco IOS on ASR 9000 devices with software 5.2.0 Base allows remote attackers to cause a denial of service (process reset) via crafted packets, aka Bug ID CSCun36525.
The REST interface in Cisco Unified Communications Manager IM and Presence Service 11.5(1) allows remote attackers to cause a denial of service (SIP proxy service restart) via a crafted HTTP request, aka Bug ID CSCuw31632.
The RADIUS functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.0(250.0) and 7.0(252.0) allows remote attackers to disconnect arbitrary sessions via crafted Disconnect-Request UDP packets, aka Bug ID CSCuw29419.
The DHCPv6 server in Cisco IOS on ASR 9000 devices with software 5.2.0 Base allows remote attackers to cause a denial of service (process reset) via crafted packets, aka Bug ID CSCun72171.
Cisco TelePresence Server 4.1(2.29) through 4.2(4.17) on 7010; Mobility Services Engine (MSE) 8710; Multiparty Media 310, 320, and 820; and Virtual Machine (VM) devices allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted HTTP requests that are not followed by an unspecified negotiation, aka Bug ID CSCuv47565.
Cisco ASR 5000 devices with software 19.0.M0.60828 allow remote attackers to cause a denial of service (OSPF process restart) via crafted length fields in headers of OSPF packets, aka Bug ID CSCuv62820.
The passthrough FTP feature on Cisco Web Security Appliance (WSA) devices with software 8.0.7-142 and 8.5.1-021 allows remote attackers to cause a denial of service (CPU consumption) via FTP sessions in which the control connection is ended after data transfer, aka Bug ID CSCut94150.
cifs-ao in the CIFS optimization functionality on Cisco Wide Area Application Service (WAAS) and Virtual WAAS (vWAAS) devices 5.x before 5.3.5d and 5.4 and 5.5 before 5.5.3 allows remote attackers to cause a denial of service (resource consumption and device reload) via crafted network traffic, aka Bug ID CSCus85330.
Cisco ASR 5000 and 5500 devices with software 18.0.0.57828 and 19.0.M0.61045 allow remote attackers to cause a denial of service (vpnmgr process restart) via a crafted header in a TACACS packet, aka Bug ID CSCuw01984.
Cisco ASR 5000 devices with software 16.0(900) allow remote attackers to cause a denial of service (telnetd process restart) via a TELNET connection, aka Bug ID CSCuv25815.
Cisco IOS XR 4.2.0, 4.3.0, 5.0.0, 5.1.0, 5.2.0, 5.2.2, 5.2.4, 5.3.0, and 5.3.2 does not properly restrict the number of Path Computation Elements (PCEs) for OSPF LSA opaque area updates, which allows remote attackers to cause a denial of service (device reload) via a crafted update, aka Bug ID CSCuw83486.
A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause an unexpected reboot of the switch, leading to a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.
A vulnerability in the SSL VPN negotiation process for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to inefficient direct memory access (DMA) memory management during the negotiation phase of an SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted Datagram TLS (DTLS) traffic to an affected device. A successful exploit could allow the attacker to exhaust DMA memory on the device and cause a DoS condition.
A vulnerability in the PDF archive parsing module in Clam AntiVirus (ClamAV) Software versions 0.101 - 0.102.2 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to a stack buffer overflow read. An attacker could exploit this vulnerability by sending a crafted PDF file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process crash, resulting in a denial of service condition.
The WebApplications Identity Management subsystem in Cisco Unified Communications Manager 10.5(0.98000.88) allows remote attackers to cause a denial of service (subsystem outage) via invalid session tokens, aka Bug ID CSCul83786.
The IP ingress packet handler on Cisco Aironet 1800 devices with software 8.1(112.3) and 8.1(112.4) allows remote attackers to cause a denial of service via a crafted header in an IP packet, aka Bug ID CSCuv63138.
Cisco NX-OS 4.1 through 7.3 and 11.0 through 11.2 on Nexus 2000, 3000, 3500, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote attackers to cause a denial of service (device crash) via malformed IPv4 DHCP packets to the DHCPv4 relay agent, aka Bug IDs CSCuq39250, CSCus21733, CSCus21739, CSCut76171, and CSCux67182.
Cisco ASR 5500 System Architecture Evolution (SAE) Gateway devices with software 19.1.0.61559 and 19.2.0 allow remote attackers to cause a denial of service (BGP process restart) via a crafted header in a BGP packet, aka Bug ID CSCuw65781.
Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.
A vulnerability in the OSPF Version 2 (OSPFv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation when the affected software processes certain OSPFv2 packets with Link-Local Signaling (LLS) data. An attacker could exploit this vulnerability by sending a malformed OSPFv2 packet to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.
A vulnerability in the SSL/TLS session handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak when closing SSL/TLS connections in a specific state. An attacker could exploit this vulnerability by establishing several SSL/TLS sessions and ensuring they are closed under certain conditions. A successful exploit could allow the attacker to exhaust memory resources in the affected device, which would prevent it from processing new SSL/TLS connections, resulting in a DoS. Manual intervention is required to recover an affected device.
A vulnerability in the Protocol Independent Multicast (PIM) feature for IPv6 networks (PIM6) of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper error handling when processing inbound PIM6 packets. An attacker could exploit this vulnerability by sending multiple crafted PIM6 packets to an affected device. A successful exploit could allow the attacker to cause the PIM6 application to leak system memory. Over time, this memory leak could cause the PIM6 application to stop processing legitimate PIM6 traffic, leading to a DoS condition on the affected device.