A vulnerability, which was classified as problematic, has been found in D-Link DNS-320 2.02b01. Affected by this issue is some unknown functionality of the file /cgi-bin/widget_api.cgi of the component Web Management Interface. The manipulation of the argument getHD/getSer/getSys leads to information disclosure. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

An issue was discovered in D-Link mydlink+ 3.8.5 build 259 for DCS-933L 1.05.04 and DCS-934L 1.05.04 devices. The mydlink+ app sends the username and password for connected D-Link cameras (such as DCS-933L and DCS-934L) unencrypted from the app to the camera, allowing attackers to obtain these credentials and gain control of the camera including the ability to view the camera's stream and make changes without the user's knowledge.

A vulnerability classified as problematic was found in D-Link DCS-6517 and DCS-7517 up to 2.02.0. Affected by this vulnerability is the function generate_pass_from_mac of the file /bin/httpd of the component Root Password Generation Handler. The manipulation leads to insufficient entropy. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DGS-1100 devices with Rev.B firmware 1.01.018 have a hardcoded SSL private key, which allows man-in-the-middle attackers to spoof devices by hijacking an HTTPS session.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, was found in D-Link DCS-7517 up to 2.02.0. This affects the function g_F_n_GenPassForQlync of the file /bin/httpd of the component Qlync Password Generation Handler. The manipulation leads to use of hard-coded password. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext.

An issue was discovered on D-Link DIR-823G devices with firmware through 1.02B03. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body, such as a body of ' /bin/telnetd' for the GetDeviceSettingsset API function. Consequently, an attacker can execute any command remotely when they control this input.

An issue was discovered on the D-Link DWR-932B router. qmiweb provides sensitive information for CfgType=get_homeCfg requests.

An information disclosure vulnerability exists in the Zebra IP Routing Manager functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to the disclosure of sensitive information. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. This vulnerability affects the function sub_41F0FC of the file /H5/webgl.data. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, was found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected is an unknown function of the file /index.data. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /install_base.data. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as problematic has been found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. This affects an unknown part of the file /xml/info.xml of the component HTTP GET Request Handler. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-815 devices with firmware before 2.07.B01 allow remote attackers to obtain sensitive information by leveraging cleartext storage of the administrative password.

The web/web_file/fb_publish.php script in D-Link DNS-320L before 1.04b12 and DNS-327L before 1.03b04 Build0119 does not authenticate requests, which allows remote attackers to obtain arbitrary photos and publish them to an arbitrary Facebook profile via a target album_id and access_token.

index.cgi in D-Link DAP-1360 with firmware 2.5.4 and earlier allows remote attackers to bypass authentication and obtain sensitive information by setting the client_login cookie to admin.

D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 stores account passwords in cleartext, which allows local users to obtain sensitive information by reading the Users[#]["Password"] fields in /tmp/teamf1.cfg.ascii.

D-Link DSL-2875AL and DSL-2877AL devices through 1.00.05 are prone to information disclosure via a simple crafted request to index.asp on the web management server because of username_v and password_v variables.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-320L, DNS-320LW and DNS-327L up to 20240403 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/info.cgi of the component HTTP GET Request Handler. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-259285 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DIR-865L has Information Disclosure.

A vulnerability was found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this issue is some unknown functionality of the file /login.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03, which could let a malicious user obtain sensitive information. which could let a malicious user obtain sensitive information.

An Information Disclosure vulnerability exists due to insufficient validation of authentication cookies for the RTSP session in D-Link DCS-5635 1.01, DCS-1100L 1.04, DCS-1130L 1.04, DCS-1100 1.03/1.04_US, DCS-1130 1.03/1.04_US , DCS-2102 1.05_RU/1.06/1.06_FR/1.05_TESCO, DCS-2121 1.05_RU/1.06/1.06_FR/1.05_TESCO, DCS-3410 1.02, DCS-5230 1.02, DCS-5230L 1.02, DCS-6410 1.0, DCS-7410 1.0, DCS-7510 1.0, and WCS-1100 1.02, which could let a malicious user obtain unauthorized access to video streams.

A vulnerability, which was classified as problematic, has been found in D-Link DI-7003GV2 24.04.18D1 R(68125). This issue affects some unknown processing of the file /H5/get_version.data of the component Configuration Handler. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-815 REV. B (with firmware through DIR-815_REVB_FIRMWARE_PATCH_2.07.B01) devices have permission bypass and information disclosure in /htdocs/web/getcfg.php, as demonstrated by a /getcfg.php?a=%0a_POST_SERVICES%3DDEVICE.ACCOUNT%0aAUTHORIZED_GROUP%3D1 request.

D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Information Disclosure attacks via unspecified vectors.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is an information disclosure vulnerability via requests for the router_info.xml document. This will reveal the PIN code, MAC address, routing table, firmware version, update time, QOS information, LAN information, and WLAN information of the device.

An issue was discovered in /bin/goahead on D-Link DIR-823G devices with firmware 1.02B03. There is incorrect access control allowing remote attackers to get sensitive information (such as MAC address) about all clients in the WLAN via the GetClientInfo HNAP API. Consequently, an attacker can achieve information disclosure without authentication.

D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such as: DCS-936L, DCS-942L, DCS-8000LH, DCS-942LB1, DCS-5222L, DCS-825L, DCS-2630L, DCS-820L, DCS-855L, DCS-2121, DCS-5222LB1, DCS-5020L, and many more. There are many affected firmware versions starting from 1.00 and above. The configuration file can be accessed remotely through: <Camera-IP>/common/info.cgi, with no authentication. The configuration file include the following fields: model, product, brand, version, build, hw_version, nipca version, device name, location, MAC address, IP address, gateway IP address, wireless status, input/output settings, speaker, and sensor settings.

The D-Link DCS-932L camera with firmware 1.02 allows remote attackers to discover the password via a UDP broadcast packet, as demonstrated by running the D-Link Setup Wizard and reading the _paramR["P"] value.

A vulnerability, which was classified as problematic, was found in D-Link DNS-320 2.02b01. This affects an unknown part of the file /cgi-bin/discovery.cgi of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability classified as critical was found in D-Link DAP-1360, DIR-300, DIR-615, DIR-615GF, DIR-615S, DIR-615T, DIR-620, DIR-620S, DIR-806A, DIR-815, DIR-815AC, DIR-815S, DIR-816, DIR-820, DIR-822, DIR-825, DIR-825AC, DIR-825ACF, DIR-825ACG1, DIR-841, DIR-842, DIR-842S, DIR-843, DIR-853, DIR-878, DIR-882, DIR-1210, DIR-1260, DIR-2150, DIR-X1530, DIR-X1860, DSL-224, DSL-245GR, DSL-2640U, DSL-2750U, DSL-G2452GR, DVG-5402G, DVG-5402G, DVG-5402GFRU, DVG-N5402G, DVG-N5402G-IL, DWM-312W, DWM-321, DWR-921, DWR-953 and Good Line Router v2 up to 20240112. This vulnerability affects unknown code of the file /devinfo of the component HTTP GET Request Handler. The manipulation of the argument area with the input notice|net|version leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251542 is the identifier assigned to this vulnerability.

D-Link DAP-2622 DDP Get SSID List WPA PSK Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. . Was ZDI-CAN-20078.

D-Link DVG-N5402SP with firmware W1000CN-00, W1000CN-03, or W2000EN-00 discloses usernames, passwords, keys, values, and web account hashes (super and admin) in plaintext when running a configuration backup, which allows remote attackers to obtain sensitive information.

D-Link DIR-823G v1.0.2B05_20181207 is vulnerable to Information Disclosure. The device allows unauthorized configuration file downloads, and the downloaded configuration files contain plaintext user passwords.

An information disclosure vulnerability exists in the Syslog functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to the disclosure of sensitive information. An attacker can send an HTTP request to trigger this vulnerability.

An information disclosure vulnerability exists when the Microsoft Edge Fetch API incorrectly handles a filtered response type, aka "Microsoft Edge Information Disclosure Vulnerability." This affects Microsoft Edge.

An information disclosure vulnerability in Fortinet FortiOS 6.0.0 and below versions reveals user's web portal login credentials in a Javascript file sent to client-side when pages bookmarked in web portal use the Single Sign-On feature.

OWASP HTML Sanitizer (aka owasp-java-html-sanitizer) before 88, when JavaScript is disabled, allows user-assisted remote attackers to obtain potentially sensitive information via a crafted FORM element within a NOSCRIPT element.

IIS 5 and 5.1 supporting WebDAV methods allows remote attackers to determine the internal IP address of the system (which may be obscured by NAT) via (1) a PROPFIND HTTP request with a blank Host header, which leaks the address in an HREF property in a 207 Multi-Status response, or (2) via the WRITE or MKCOL method, which leaks the IP in the Location server header.

A vulnerability was found in atjiu pybbs up to 6.0.0 and classified as problematic. This issue affects the function sendEmailCode of the file src/main/java/co/yiiu/pybbs/controller/api/SettingsApiController.java of the component Registered Email Handler. The manipulation of the argument email leads to information exposure through error message. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is 234197c4f8fc7ce24bdcff5430cd42492f28936a. It is recommended to apply a patch to fix this issue.

A vulnerability was determined in mtons mblog up to 3.5.0. Affected is an unknown function of the file /register. The manipulation leads to information exposure through error message. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used.

IIS 4.0 allows remote attackers to obtain the internal IP address of the server via an HTTP 1.0 request for a web page which is protected by basic authentication and has no realm defined.

Microsoft Java Virtual Machine allows remote attackers to read files via the getSystemResourceAsStream function.

Apache Tomcat 5.5.0 through 5.5.29 and 6.0.0 through 6.0.26 might allow remote attackers to discover the server's hostname or IP address by sending a request for a resource that requires (1) BASIC or (2) DIGEST authentication, and then reading the realm field in the WWW-Authenticate header in the reply.

The Cybozu kintone mobile application 1.x before 1.0.6 for Android allows attackers to discover an authentication token via a crafted application.

An information exposure vulnerability exists in the Palo Alto Networks GlobalProtect app on Windows and MacOS where the credentials of the local user account are sent to the GlobalProtect portal when the Single Sign-On feature is enabled in the GlobalProtect portal configuration. This product behavior is intentional and poses no security risk when connecting to trusted GlobalProtect portals configured to use the same Single Sign-On credentials both for the local user account as well as the GlobalProtect login. However when the credentials are different, the local account credentials are inadvertently sent to the GlobalProtect portal for authentication. A third party MITM type of attacker cannot see these credentials in transit. This vulnerability is a concern where the GlobalProtect app is deployed on Bring-your-Own-Device (BYOD) type of clients with private local user accounts or GlobalProtect app is used to connect to different organizations. Fixed versions of GlobalProtect app have an app setting to prevent the transmission of the user's local user credentials to the target GlobalProtect portal regardless of the portal configuration. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.10 on Windows and MacOS; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.9 on Windows and MacOS This issue does not affect GlobalProtect app on other platforms.