Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.

Endian Firewall before 3.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) NEW_PASSWORD_1 or (2) NEW_PASSWORD_2 parameter to cgi-bin/chpasswd.cgi.

A command-injection vulnerability in the Image Upload function of the NASCENT RemKon Device Manager 4.0.0.0 allows attackers to execute arbitrary commands, as root, via shell metacharacters in the filename parameter to assets/index.php.

Module::Signature before 0.74 allows remote attackers to execute arbitrary shell commands via a crafted SIGNATURE file which is not properly handled when generating checksums from a signed manifest.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1938.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1986.

Cool Projects TarDiff allows remote attackers to execute arbitrary commands via shell metacharacters in the name of a (1) tar file or (2) file within a tar file.

The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to a Remote Command Injection vulnerability in its web administrative interface. This vulnerability occurs in the 'viewcert' CGI (/cgi-bin/viewcert) component responsible for processing SSL certificate information. The CGI application doesn't properly escape the information it's passed in the 'CERT' variable before a call to system() is performed - allowing for remote command injection. Exploitation of this vulnerability yields shell access to the remote machine under the nobody user account.

There is command injection in the addMeshNode interface of xqnetwork.lua, which leads to command execution under administrator authority on Xiaomi router AX3600 with rom versionrom< 1.1.12

In Xiaomi router R3600 ROM version<1.0.66, filters in the set_WAN6 interface can be bypassed, causing remote code execution. The router administrator can gain root access from this vulnerability.

The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to two Remote Command Injection vulnerabilities in its web administrative interface. These vulnerabilities occur in the diagnostics CGI (/cgi-bin/diagnostics) component responsible for emailing out information about the state of the system. The application doesn't properly escape the information passed in the 'tsrDeleteRestartedFile' or 'currentTSREmailTo' variables before making a call to system(), allowing for remote command injection. Exploitation of this vulnerability yields shell access to the remote machine under the nobody user account.

The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to a Remote Command Injection vulnerability in its web administrative interface. This vulnerability occurs in the 'extensionsettings' CGI (/cgi-bin/extensionsettings) component responsible for handling some of the server's internal configurations. The CGI application doesn't properly escape the information it's passed when processing a particular multi-part form request involving scripts. The filename of the 'scriptname' variable is read in unsanitized before a call to system() is performed - allowing for remote command injection. Exploitation of this vulnerability yields shell access to the remote machine under the nobody user account. This is SonicWall Issue ID 181195.

Buffer overflow in an ActiveX control in MDraw30.ocx in Schneider Electric ProClima before 6.1.7 allows remote attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-8513 and CVE-2014-8514. NOTE: this may be clarified later based on details provided by researchers.

Wavlink WN575A4, WN579X3, and WN530G3A devices through 2020-05-15 allow unauthenticated remote users to inject commands via the key parameter in a login request.

The remote administration interface in D-Link DIR-815 devices with firmware before 2.03.B02 allows remote attackers to execute arbitrary commands via vectors related to an "HTTP command injection issue."

The dns-sync module before 0.1.1 for node.js allows context-dependent attackers to execute arbitrary commands via shell metacharacters in the first argument to the resolve API function.

The eslint-fixer package through 0.1.5 for Node.js allows command injection via shell metacharacters to the fix function. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. The ozum/eslint-fixer GitHub repository has been intentionally deleted

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /cgi-bin/uploadAccessCodePic.

Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the wps setting function via the wps_enrolee_pin parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

IBM Rational AppScan Source 8.0 through 8.0.0.2 and 8.5 through 8.5.0.1 and Security AppScan Source 8.6 through 8.6.0.2, 8.7 through 8.7.0.1, 8.8, 9.0 through 9.0.0.1, and 9.0.1 allow remote attackers to execute arbitrary commands on the installation server via unspecified vectors. IBM X-Force ID: 96721.

Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the pptp (wan_pptp.html) function via the pptp_fix_ip, pptp_fix_mask, pptp_fix_gw, and wan_dns1_stat parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

An issue was discovered in Titan SpamTitan 7.07. Improper input sanitization of the parameter community on the page snmp-x.php would allow a remote attacker to inject commands into the file snmpd.conf that would allow executing commands on the target server.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/setAdInfoDetail.

Snoopy allows remote attackers to execute arbitrary commands. NOTE: this vulnerability exists due to an incomplete fix for CVE-2014-5008.

Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 allow Embedded_Ace_Set_Task.cgi command injection.

The printDirect function in lib/printer.js in the node-printer module 0.0.1 and earlier for Node.js allows remote attackers to execute arbitrary commands via unspecified characters in the lpr command.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/setWorkmode.

Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the static ip settings function via the wan_ip_stat, wan_mask_stat, wan_gw_stat, and wan_dns1_stat parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Arris TR3300 v1.0.13 were discovered to contain a command injection vulnerability in the ddns function via the ddns_name, ddns_pwd, h_ddns、ddns_host parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Arris TR3300 v1.0.13 were discovered to contain a command injection vulnerability in the dhcp function via the hostname parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /cgi-bin/uploadWeiXinPic.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/setPicListItem.

Unsanitized user input in the web interface for Linksys WiFi extender products (RE6400 and RE6300 through 1.2.04.022) allows for remote command execution. An attacker can access system OS configurations and commands that are not intended for use beyond the web UI.

The validateAdminConfig handler in the Analytics Management Console in HPE Vertica 7.0.x before 7.0.2.12, 7.1.x before 7.1.2-12, and 7.2.x before 7.2.2-1 allows remote attackers to execute arbitrary commands via the mcPort parameter, aka ZDI-CAN-3417.

Sharp NEC Displays ((UN462A R1.300 and prior to it, UN462VA R1.300 and prior to it, UN492S R1.300 and prior to it, UN492VS R1.300 and prior to it, UN552A R1.300 and prior to it, UN552S R1.300 and prior to it, UN552VS R1.300 and prior to it, UN552 R1.300 and prior to it, UN552V R1.300 and prior to it, UX552S R1.300 and prior to it, UX552 R1.300 and prior to it, V864Q R2.000 and prior to it, C861Q R2.000 and prior to it, P754Q R2.000 and prior to it, V754Q R2.000 and prior to it, C751Q R2.000 and prior to it, V984Q R2.000 and prior to it, C981Q R2.000 and prior to it, P654Q R2.000 and prior to it, V654Q R2.000 and prior to it, C651Q R2.000 and prior to it, V554Q R2.000 and prior to it, P404 R3.200 and prior to it, P484 R3.200 and prior to it, P554 R3.200 and prior to it, V404 R3.200 and prior to it, V484 R3.200 and prior to it, V554 R3.200 and prior to it, V404-T R3.200 and prior to it, V484-T R3.200 and prior to it, V554-T R3.200 and prior to it, C501 R2.000 and prior to it, C551 R2.000 and prior to it, C431 R2.000 and prior to it) allows an attacker a buffer overflow and to execute remote code by sending long parameters that contains specific characters in http request.

Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the time and time zone function via the h_primary_ntp_server, h_backup_ntp_server, and h_time_zone parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

/cgi-bin/activate.cgi on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve command injection via a remote HTTP request in DEBUG mode.

The WordPress Flash Uploader plugin before 3.1.3 for WordPress allows remote attackers to execute arbitrary commands via vectors related to invalid characters in image_magic_path.

Snoopy allows remote attackers to execute arbitrary commands.

The EZPZ One Click Backup (ezpz-one-click-backup) plugin 12.03.10 and earlier for WordPress allows remote attackers to execute arbitrary commands via the cmd parameter to functions/ezpz-archive-cmd.php.

Unrestricted file upload vulnerability in ls/vw_snapshots.php in the VideoWhisper Live Streaming Integration plugin before 4.29.5 for WordPress allows remote attackers to execute arbitrary PHP code by uploading a file with a double extension, and then accessing the file via a direct request to a wp-content/plugins/videowhisper-live-streaming-integration/ls/snapshots/ pathname, as demonstrated by a .php.jpg filename.

The karo gem 2.3.8 for Ruby allows Remote command injection via the host field.

Seagate BlackArmor NAS devices with firmware sg2000-2000.1331 allow remote attackers to execute arbitrary commands via shell metacharacters in the ip parameter to backupmgt/getAlias.php.

An issue in Dut Computer Control Engineering Co.'s PLC MAC1100 allows attackers to execute arbitrary code.

Emerson Process Management ROC800 RTU with software 3.50 and earlier, DL8000 RTU with software 2.30 and earlier, and ROC800L RTU with software 1.20 and earlier allows remote attackers to execute arbitrary commands via a TCP replay attack.

fs-path node module before 0.0.25 is vulnerable to command injection by way of user-supplied inputs via the `copy`, `copySync`, `remove`, and `removeSync` methods.

A command injection vulnerability in the apex-publish-static-files npm module version <2.0.1 which allows arbitrary shell command execution through a maliciously crafted argument.